testo 327-1 Flue Gas Analyser Advanced Kit 0563 3203 81

*Important Calibration Information:

Please note that due to additional stringent procedures required to calibrate natural gas equipment, calibration on this instrument may unfortunately incur a longer turnaround. Whilst we are acutely aware that this is not always convenient, we kindly request that you allow approximately 5-7 additional working days for purchases including calibration. We will endeavour to always improve upon this but feel it is important to let our customers know before the purchase is made.

The testo 327-1 is the entry measuring instrument for flue gas analysis. It measures combustion efficiency, °C, O2 , CO2 , CO and flue draught.

A dual wall O2 measurement as well as an ambient CO measurement are also possible. The powerful LED backlighting in the 4-line display guarantees good legibility even in poor lighting. The measuring instrument stands out thanks to its ergonomic housing design as well as its durability (IP40). The integrated sensor and instrument diagnosis offers security and guarantees high availability of the instrument.

The testo 327-1 is tested to EN50379, and also conforms to BS7967 and Gas Safe TB143. The single integrated flue gas and thermocouple connector of the testo 327-1 ensures a fast, gas tight connection to the sample hose every time. The testo 327-1 also has automatic pump protection as standard to help protect the CO measuring cell from damage due to over-range (4,000ppm range capability).

The testo 327-1 provides best quality and value for flue gas analysis and much more. It measures combustion efficiency, °C, O2, CO2, CO and flue draught. The strong LED background light in the 4 line display guarantees an easy-to-read display even when lighting conditions are unfavourable. The analyser stands out on account of its easy menu navigation and ergonomic housing as well as its durability.

testo 327-1 Advanced Kit Comes Supplied With:

• testo 327 Flue Gas Analyser
• Rechargeable battery
• Calibration protocol
• Flue Gas Probe (180mm x 6mm diameter)
• Pressure hose Connection Kit
• Differential temperature kit (2 x pipe clamp probes)
• testo infrared printer 0554 0549
• Soft carry case with shoulder strap
• AC power supply
  
  

Key Features:

• Easy menu navigation
• 4 line segment display
• LED display light
• 4,000ppm CO sensor with automatic pump shut off to help prevent saturation.
• Easy IR printout
• Built-in condensate trap
• Testo IR printer
• EN 50379 Part 2 for O2 , °C, mbar
• EN 50379 Part 3 for CO
• Li-ion rechargeable battery
• Fast probe connection using single probe plug
• Ambient CO measurement using flue gas probe
• Adaptors and accesories for  pressure measurement, and differential temperature clamp probes supplied
• Differential temperature measurement
• Flue draught and differential pressure measurement
• Timed ambient CO measurement
• Tightness and let-by tests
• 7 fuels available in menu
  
  

Spares and Accessories (Not Included):

• Mains unit international 100-240 V AC / 6,3V DC for mains operation or battery charging in instrument for mains operation or battery
  charging in instrument 0554 1096 
• Testo fast printer IRDA with wireless infrared interface; 1 roll thermal paper; 4 AA batteries 0554 0549
• Spare thermal paper for printer (6 rolls) 0554 0568
• testo manual smoke pump for testing oil-fired boilers 300554 0307
• Hose connection set for separate gas pressure measurement testo 327 / testo 330-LL 0554 1203
• Differential temperature set consisting of 2 clamp probes and thermocouple adapter 0554 7223
• Spare particle filter, 10 off 0554 0040
• Spare soot filter paper; 8 paper rolls 0554 0146
• CPA1 Probe Set: Includes B2 angled probe, B1 gas cooker probe, hose connector
  silicone hose, gas pressure controller and gas leak detector 300554 1000
  
  

isswww and Testo

Testo Limited was established in 1983 as the UK subsidiary of testo and is based in Alton, Hampshire where they supply a full range of test equipment across the UK and Ireland. They are a key supplier to the Facility Management and Industrial Maintenance Sectors where they are able to provide the full range of instruments which are critical to the effective and efficient maintenance of premises, and allow compliance with all key regulations.

Testo have many innovative products to their portfolio with a modern attractive design. Aesthetic appeal isn't something usually attributed to test equipment but Testo really breaks the mould. Coupled with their pedigree as a worldwide manufacturer and supplier with a proven track record, we are confident in supplying and recommending Testo products without reservation.

Bank/Public Holidays

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

• Zones A & B  - Mainland delivery rates apply. 
• Zone C - Scottish Highlands (Charges are calculated at the checkout).
• Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
• Zone E - Northern Ireland (Charges are calculated at the checkout).
• Zone F - Republic of Ireland (Charges are calculated at the checkout).
  
  

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA