testo 300 Flue Gas Analyser Handset only 0633 3002 78
| testo 300 Flue Gas Analyser Technical Specification | |
|---|---|
| Temperature - TC Type K (NiCr-Ni) | |
|
Measuring range |
-40 to +1200 °C |
|
Accuracy |
±0.5 °C (0.0 to +100.0 °C) ±0.5 % of mv (Remaining Range) |
|
Resolution |
0.1 °C (-40 to +999.9 °C) 1 °C (Remaining Range) |
| Differential Pressure - Piezoresistive | |
|---|---|
|
Measuring range |
-100 to +200 hPa |
|
Accuracy |
±0.5 hPa (0 to +50.0 hPa) ±1 % of mv (+50.1 to +100.0 hPa) ±1.5 % of mv (+100.1 to +200 hPa) |
|
Resolution |
0.01 hPa |
| Flue gas O₂ | |
|---|---|
|
Measuring range |
0 to 21 Vol.% |
|
Accuracy |
±0.2 Vol.% |
|
Resolution |
0.1 Vol.% |
| Differential Pressure flue gas Draught - Piezoresistive | |
|---|---|
|
Measuring range |
-9.99 to +40 hPa |
|
Accuracy |
±0.005 hPa (+0 to +0.1 hPa) ±0.02 hPa (+0.1 to +3.00 hPa) ±1.5 % of mv (3.01 to +40 hPa) |
|
Resolution |
0.001 hPa (0 to 0.1 hPa) 0.01 hPa (Remaining Range) |
| Flue gas degree of effectivity, Eta (calculated) | |
|---|---|
|
Measuring range |
0 to 120 % |
|
Resolution |
0.1 % |
| Flue gas loss (calculated) | |
|---|---|
|
Measuring range |
0 to 99.9 % |
|
Resolution |
0.1 % |
| Flue gas CO₂ calculation (calculated from O₂) | |
|---|---|
|
Measuring range |
Display range 0 to CO₂ max |
|
Accuracy |
±0.2 Vol.% |
|
Resolution |
0.1 Vol.% |
| Flue gas CO (without H₂-compensation) | |
|---|---|
|
Measuring range |
0 to 4000 ppm |
|
Accuracy |
±20 ppm (0 to 400 ppm) ±5 % of mv (401 to 2000 ppm) ±10 % of mv (2001 to 4000 ppm) |
|
Resolution |
1 ppm |
| Ambient CO | |
|---|---|
|
Measuring range |
0 to 2000 ppm |
|
Accuracy |
±10 ppm (0 to 100 ppm) ±10 % of mv (101 to 2000 ppm) |
|
Resolution |
1 ppm |
| General technical data | |
|---|---|
|
Operating humidity |
15 to 90 %RH non-condensing |
|
Weight |
approximately 800 g |
|
Dimensions |
244 (including probe connection) x 98 x 59 mm (LxWxH) |
|
Operating temperature |
-5 to +45 °C |
|
Protection class |
IP40 |
|
Product colour |
black/orange |
|
Display type |
5.0" touch display, HD 1280*720 pixels, IPS (160 k) |
|
Power supply |
Rechargeable battery, USB mains unit |
|
Authorizations |
TÜV-tested according to 1st German Federal Immission Control Ordinance (BImSchV) EN 50379, Parts 1-3 |
|
Guarantee |
|
|
Warranty conditions |
|
|
Memory |
1,000,000 measuring values |
|
Storage battery type |
Lithium ion battery |
|
Battery life |
10 h |
|
Storage temperature |
-20 to +50 °C |
|
Charging temperature |
0 to +45 °C |
| Differential Pressure 4 Pa measurement - Piezoresistive | |
|---|---|
|
Measuring Range |
-50 to +50 Pa |
|
Accuracy |
±0.3 Pa (< 10 Pa) ±3 % of mv (Remaining Range) |
|
Resolution |
0.1 Pa |
Description
testo 300 Flue Gas Analyser Handset only 0633 3002 78
|
DELIVERY SCOPE Flue gas analysers are ordered back to back from many suppliers. This is due to the degradation that can occur with certain sensor heads that are held on shelves for too long and affects all distributors. We want you to receive the best product with the maximum life efficiency possible, with this in mind please allow for a slightly longer than usual delivery, generally around 4-5 days. |
*Important Calibration Information:
Please note that due to additional stringent procedures required to calibrate natural gas equipment, calibration on this instrument may unfortunately incur a longer turnaround. Whilst we are acutely aware that this is not always convenient, we kindly request that you allow approximately 5-7 additional working days for purchases including calibration. We will endeavour to always improve upon this but feel it is important to let our customers know before the purchase is made.
Handset-only upgrade to allow existing testo FGA owners to convert over to the innovative testo 300 touchscreen FGA : the testo 300 flue gas analyzer is supplied with an O2 sensor, and CO sensor up to 4,000 ppm - This is handset only and will require existing users sampling probe, case, etc.
Key Features:
-
Large 5” HD display with smart touch operation
-
Connect up to 4 smart probes via USB Dongle
-
Email/Bluetooth customer reports
-
Optional Printer and NO sensor
-
Domestic & commercial kits available
Overview:
- Truly smart flue gas measurement on heating systems with the testo 300 flue gas analyzer. High-quality sensors, intuitive operation with smart-touch technology and smart features, such as efficient documentation and e-mailing of reports, will make your day-to-day work easier.
testo 300 flue gas analyzer with smart-touch operation – Features
Impressive measuring technology and quality - Fitted with O2 sensor, and 4,000ppm CO sensor
- Longer sensor service life thanks to automatic sensor protection
- TÜV-tested according to EN 50379, Parts 1-3
- Supplied with compact flue gas probe with latching connector to ensure a reliable and robust connection
- Optionally available probes and accessories for further measuring tasks, such as gas flow pressure measurement, gas pipe testing, differential temperature measurement and ambient CO measurement.
- Smart, intuitive, efficient: easy operation in day-to-day work
- Smart-touch display for intuitive operation of the flue gas analyser: the display responds without delay – just as easy as on your smartphone
- Get the measurement result faster: clearly structured measurement menus for all relevant measurements
- Create documentation (including measuring value, measuring location, customer data) easily on site
- Save PDF measurement reports directly in the instrument and always have them available
- Signature function: your customer can sign measurement reports directly on the instrument
- E-mail measurement reports directly to the office or to customers via WiFi hotspot
- Large 5-inch HD display – enables you to see all the system's parameters immediately
- Ready to use straight away: in standby mode, the testo 300 is ready to measure at the touch of a button. Use it straight away with the next customer – because you no longer need to wait for the end of the zeroing phase
- Integrated Bluetooth® interface: immediate printout of the measuring values on site with the appropriate printer (optional) or transfer of pdf reports to PC or smartphone.
testo 300 Series Selector:
testo EasyHeat v2.12 SP7 - PC software
-
PC software for reading out the data from corresponding Testo measuring instruments
-
Graphic and tabular presentation of the measurement parameters
-
Administrating customer and location data
Free download: PC software for graphic and tabular presentation as well as for evaluation and archiving of measurement data. Customer and measurement location data can be conveniently managed with the testo EasyHeat.
isswww and testo
Testo Limited was established in 1983 as the UK subsidiary of testo and is based in Alton, Hampshire where they supply a full range of test equipment across the UK and Ireland. They are a key supplier to the Facility Management and Industrial Maintenance Sectors where they are able to provide the full range of instruments which are critical to the effective and efficient maintenance of premises, and allow compliance with all key regulations.
Testo have many innovative products to their portfolio with a modern attractive design. Aesthetic appeal isn't something usually attributed to test equipment but Testo really breaks the mould. Coupled with their pedigree as a worldwide manufacturer and supplier with a proven track record, we are confident in supplying and recommending Testo products without reservation.
Features & Specification
| Key Features | Large 5” HD display with smart touch operation, Connect up to 4 smart probes via USB Dongle, Email & Bluetooth customer reports, Optional Printer and NO sensor, Domestic & commercial kits available, Free download testo EasyHeat PC software | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Testo | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Delivery
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA