Socket and See Smart Meter Installation Kit

The complete electrical test equipment solution for Smart Meter installation engineers

Assisting industry engineers to implement and practice safe working procedures, during the installation process. All components are suitable for use with PPE, as may be required by company policy for compliance purposes. For CATIV supply side safe isolation, the kit includes a 2 pole safety tester with unique HiZ /LoZ indication for glow tests and an auto-ghost voltage suppression for differentiating between potentially harmless phantom voltages and dangerous live voltages, a vibrating non-contact voltage detector for identifying phase and neutral lines and a single pole contact voltage and phase finder; all of which can be verified using the true AC waveform proving unit without needing to remove it from the custom case. 13A sockets can be checked with the colour coded LED professional socket tester. All components fit safely in a compact and protective carry case, which can be effortlessly carried using either the shoulder strap or belt loop.

Key Features:

• Complete solution for Smart Metering Installation engineers

• VIP ESI with auto ghost voltage suppression and Hiz / Loz indication

• SP400 proving device can also prove non contact voltage detectors

• EPF PRO utilises capacitive coupling for consistent indication

• SOK32 indicates correct and 17 other fault conditions.

The Smart Meter Installation kit Comprises the Following:

1x VIP ESI Electrical Service Industry Safety 2 Pole Tester

Designed specifically for the smart metering engineer with automatic ghost voltage suppression and HiZ / LoZ indication (glow test). The VIP ESI also features colour coded LED indication on the front and on the base of the unit. The prods are interchangeable, either straight or right angled to make testing easier in awkward situations and VIP ESI can be used with insulated gauntlets. Dual insulated wear indicating cable provides additional safety for the user.

• Easy to use - Reduces training
• Auto-ghost voltage suppression
• Dual bank of colour coded LEDs
• HiZ / LoZ indication replicates glow test
• Interchangeable prods (right angle/straight)

1x SP400 Professional proving Unit

True AC output at 50Hz DC component. Ranges from 50 to 690V with ramp up and down feature and bright LED indication. Can also be used to prove none contact voltage detectors and check the continuity feature on some 2 pole testers.

• Voltage ramp
• Continuity check
• 50Hz true AC waveform
• Non-contact voltage pad

1x VVD Pro Vibrating Non-Contact AC Voltage Detector

Operating range 50 - 1000V AC. CAT IV rated 1000V to earth. Vibrates and flashes upon detection of voltages between 50 - 1000V AC. Includes handy LED flashlight.

• Bright LED torch
• Visual verification
• CATIV Safety Rating
• Vibration verification
• 50V - 1000V Voltage range

1x EDF Pro Hazardous Voltage & Phase Finder

• Visual verification
• Audible verification
• Works whilst using PPE
• Capacitive coupling consistent indication
• Heartbeat verification for correct operation

1x SOK32 Professional Socket Tester

Displays correct and 17 other fault conditions. Self test feature to check internal electronics are working correctly. Green LED and constant tone indicate correct wiring. Red / orange LED and warbling tone indicate a fault is present and where. 

• Self check
• Audible verification
• Colour coded LEDs
• Displays correct + 17 fault conditions

1x TECC2 Carry Case

A soft and durable carry case that houses all the components of the Socket & See Smart Meter Installation Kit. It features a front pouch to accommodate the SP400 Proving Unit, meaning the unit does not need removing when being used. The TECC2 also includes a detachable neck strap and belt loop.

• Bespoke Smart Meter Installation case
• Fully operational proving unit whilst in situ
• Complete with detachable neck strap & belt loop
• Durable, compact & safe storage for all kit components
  
  

About Socket & See

Through consistent contact with Electricians, Engineers and Gas Installation engineers, Socket & See products have been around since 1998 and are designed with both professional and newly-qualified tradespeople in mind.

We started with 3 simple Socket Testers and a vision to develop a range of ‘easy-to-use’, innovative products which our customers could use straight from the box! The initial principles still stand firm today, all our products have to be - simple to operate, of great quality, innovative, time-saving and cost-effective.

Bank/Public Holidays

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

• Zones A & B  - Mainland delivery rates apply. 
• Zone C - Scottish Highlands (Charges are calculated at the checkout).
• Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
• Zone E - Northern Ireland (Charges are calculated at the checkout).
• Zone F - Republic of Ireland (Charges are calculated at the checkout).
  
  

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA