Socket and See MFT5000 Multifunction Tester

*Important Calibration Information: 

This instrument comes complete with the manufacturer’s calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed. If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply. 

MFT5000 Comes Supplied With:

• Socket & See MFT5000 multifunction tester
• 3 wire test lead set including croc clips and probes
• Pro lead: 3 x 4mm to 13A 3 pin UK plug
• Remote switched probe
• Shoulder strap
• Hard carry case
• Printed instruction manual
• Calibration certificate

Description:

The Socket & See MFT5000 18^th Edition Multifunction Tester packs all essential test functions into one, affordable, easy-to-use unit. The MFT5000 is robust and designed for everyday testing. Featuring a colour-coded, high-contrast fascia and full-colour backlit screen, the unit can be used in a whole range of environments from domestic to industrial.

Make it yours with a personalised splash screen! Contact us for more information.

What can be included on your personal splash screen…

• Name
• Phone number
• Email address
• Company name
• Company logo
• Assest ID
• Something else? Let us know!

Test sequences

Insulation Testing
Selectable ranges 250V / 500V and 1000V. The current and voltage are measured and the external resistance is calculated and displayed.

Loop Testing
High current 2 wire test mode enables the user to test the true impedance of both the Line-Neutral Loop and the Line-Earth loop and therefore to establish both the PSC (prospective short circuit current) and the PFC (prospective fault current) for the installation

No trip 3 wire test mode generates a current that is too low to trip an RCD on an otherwise healthy circuit.  The No Trip test is a 3-wire test that also checks the Live, Neutral/Earth conductors are correctly connected before running the loop test.

PFC / PSC
The result is displayed by pressing the PFC / PSC button after a loop test (High Current and No Trip)

RCD Testing
Individually selectable 30mA / 100mA / 300mA and 500mA (Type AC/A) and 100mA / 300mA (Type ACS / AS).

30mA Autotest – The unit will conduct all six required tests at a single touch of a button. Then when the RCD under test “trips” reset the RCD and continue to do so until the test procedure is complete. Clear PASS / FAIL indication provided on screen.

Ramp Test – Gradually increases the fault current and identifies the level of additional leakage at which the RCD trips. Useful for diagnostic testing of circuits where nuisance tripping is a problem and helps to identify the difference between an over-sensitive RCD and excessive leakage from poor insulation, or equipment with high leakage.

Phase Rotation
During phase rotation measurement the amplitudes and phase angles of the three inputs L1 L2 L3 are checked against limits, allowing for mild unbalance conditions. The indication 1-2-3 is displayed for normal rotation (L2 lags L1) and 3-2-1 for reverse rotation (L2 leads L1).

Display of Phase rotation is Automatic when all three test leads are connected to the 3-phase supply.

The MFT5000 will display .1 .2 .3 or .3 .2 .1 depending on the direction of phase rotation.

Socket Testing
Perform a quick and easy check of a socket's wiring condition.

Polarity Test Pad
Test for and identify rare reverse polarity (Live ‘Phase’ to earth/neutral and earth/neutral to Live ‘Phase’. A potentially dangerous condition that conventional loop testers may not highlight.

Continuity Test
Establish the resistance of the circuit under test. Lead null function for fast and accurate measurement.

The Socket & See MFT5000 is also available with a custom splash screen, so you can truly make it your own. Add your company logo, contact details, name and even an asset ID to help asset management within your organisation. No need for unsightly and potentially damaging engraving or adhesive labels.

About Socket & See 

Through consistent contact with Electricians, Engineers and Gas Installation engineers, Socket & See products have been around since 1998 and are designed with both professional and newly-qualified tradespeople in mind. 

We started with 3 simple Socket Testers and a vision to develop a range of ‘easy-to-use’, innovative products which our customers could use straight from the box! 

The initial principles still stand firm today, all our products have to be - simple to operate, of great quality, innovative, time-saving and cost-effective. 

Bank/Public Holidays

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

• Zones A & B  - Mainland delivery rates apply. 
• Zone C - Scottish Highlands (Charges are calculated at the checkout).
• Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
• Zone E - Northern Ireland (Charges are calculated at the checkout).
• Zone F - Republic of Ireland (Charges are calculated at the checkout).
  
  

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA