Socket and See IRC PRO Digital Continuity and Insulation Resistance Tester
| Socket & See IRC PRO Insulation and Continuity Tester | |
| Insulation Test Accuracy Test Voltages 250V, 500V and 1000V |
|
| Ranges (Auto Range) inc. tolerance at 20˚C 250V |
0.01 to 9.99 MΩ (±3% + 1 digits) 10.0 to 99.9 MΩ (±3% + 1 digits) 100 to 199 MΩ (±6% + 1 digits) |
| 500V |
0.01 to 9.99 MΩ (±3% + 1 digits) 10.0 to 99.9 MΩ (±3% + 1 digits) 100 to 199 MΩ (±3% + 1 digits) 200 to 499 MΩ (±6% + 1 digits) |
| 1000V |
0.01 to 9.99 MΩ (±3% + 1 digits) 10.0 to 99.9 MΩ (±3% + 1 digits) 100 to 399 MΩ (±3% + 1 digits) 400 to 999 MΩ (±6% + 1 digits) |
| Continuity Test Range Accuracy |
Test Range 0.00 to 9.99 Ω 0.0 to 99.9 Ω 100 to 19.99 kΩ |
| Tolerance at 20˚C | ±(3% + 2 digits) |
| Open Circuit Voltage | >4V, <10V |
| Zero Offset Adjust (test lead null) | 5Ω |
| Typical Test Time | >2 seconds |
| Hazard Warning LED | >25V |
| Insulation Output Voltage Voltage 250V |
Load 250 kΩ Output Current 1 mA Tolerance -10% +20% |
| Voltage 500V |
Load 500 kΩ Output Current 1 mA Tolerance -10% +20% |
| Voltage 1000V |
Load 1 MΩ Output Current 1 mA Tolerance -10% +20% |
| Short Circuit Current | < 2 mA (into 2 kΩ) |
| Typical Test Time | < 2 seconds (10 MΩ) |
Description
Socket and See IRC PRO Digital Continuity and Insulation Resistance Tester
*Important Calibration Information:
This instrument comes supplied with a ‘manufacturers calibration protocol’ please note this is NOT a traceable calibration certificate. A calibration protocol is a statement of values or tolerances within the desired range that the instrument was reading at the point of manufacture. A calibration protocol may not be an acceptable statement of accuracy according to industry accreditation bodies.
If you require a traceable calibration certificate accredited to your business, please select this option where applicable from the drop-down field below.
The Socket & See IRC PRO features 1,000V testing, with up to 500 tests from a single set of 4 x AA alkaline batteries. Expect even more tests when testing at 250v or 500V.
Other useful features include a large back lit display and protective rubber over mold, making the IRC PRO a versatile unit suitable for many environments. The unit is also fully protected against accidental connection to the mains, an often easy and expensive mistake.
IRC PRO Comes Supplied With:
- Socket & See IRCPRO
- Lead Set
- Instruction Manual
- Magnetic Hanging Strap
- Carry Case
- Batteries
Key Features:
- Insulation Test (250V, 500V, 1000V)
- Auto ranging continuity up to 19.99kΩ
- Buzzer facility for “belling out”
- Nulls leads up to 5Ω
- Hands Free function
- Hazardous voltage LED and audible tone
- Auto switch off function for battery preservation.
- Dual insulated wear indicating test leads
- GS38 prods and clips
- Measurement category CAT III 500V (CAT IV 300V)
Socket & See IRC PRO test sequences...
Insulation
Turn the rotary dial to the required test voltage. Push the test button. During the test the LCD will indicate the test voltage being applied. The result will then be shown.
Continuity Null
To ensure greater accuracy when performing continuity tests a lead null should be carried out. This will ensure that test lead resistance is taken into account when testing.
Continuity
Turn the rotary dial to the continuity position. Apply test leads to the resistance to be measured and press the test button. To ensure accurate results, the test leads should be nulled.
Hands Free
Hands free operation is available for Continuity or Insulation functions. Select the function required with the rotary dial. Press the hands free button. HANDSFREE will be displayed. Once the test button is pressed the tester will continue to perform the selected test until the hands free is deselected, the test button is pressed or the unit is powered off.
Buzzer
The buzzer function is used for quick and easy “belling out”. Turn the rotary dial to the buzzer function and apply the test leads to the resistance to be measured.
Standards & Comliance:
The Socket & See IRC PRO is fully BS EN 61010 and BS EN 61557 certified.
EMC compliance - BS EN 61326
About Socket & See
Through consistent contact with Electricians, Engineers and Gas Installation engineers, Socket & See products have been around since 1998 and are designed with both professional and newly-qualified tradespeople in mind.
We started with 3 simple Socket Testers and a vision to develop a range of ‘easy-to-use’, innovative products which our customers could use straight from the box!
The initial principles still stand firm today, all our products have to be - simple to operate, of great quality, innovative, time-saving and cost-effective.
Features & Specification
| Key Features | Audible , Auto ranging continuity, Buzzer facility, CAT III 500V (CAT IV 300V), GS38 prods and clips, Hands Free function, Insulation Test (250V, 500V, 1000V), Test Leads Included | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||
| Manufacturer | Socket and See | ||||||||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||||||||
Delivery
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA