Radiodetection Genny4 and Electricians Accessory Pack 10/ELECPACK4-UK

£934.80

Genny4 Transmitter Specification

1.  Product Summary
1.1  Product Overview: The Genny signal transmitter has been designed to complement Radiodetection’s C.A.T4 cable avoidance range  
1.2  Product Descriptions: Signal transmitter
Multi-function transmitter Cable and pipe transmitter
 
1.3  Intended Use: Used with C.A.T®4 range of locators for avoiding and tracing buried utilities  
1.4  Supplied With: Tool tray to include direct connection lead, earth stake and neodymium magnet  
2.  Performance
2.1  Maximum output voltage: 23V RMS into an open Circuit  
2.2  Maximum output current: 66mA RMS into a Short Circuit  
2.3  Maximum output power: 1 Watt in Direct Connection Mode  
2.4  Induction output: Magnetic flux Density (B)   1.089 µT @ 500mm  
3.  Transmit Functions and Operation
Transmits a signal or simultaneous signals to aid location of cable and pipes, including smaller diameter cables such as telecom or CATV
3.1   Operation: Push button control by pressing appropriate push button
On / off, speaker volume control and Boost button for selecting standard or Boost output level
 
3.2  LED Indication: Indicates Boost output mode selection and battery low warning indicator  
3.3  Operating Modes:
Direct Connection Mode: Transmitter Clamp Mode: Induction Mode:
33kHz (32768Hz) and 131kHz (131072Hz) both signals transmitted simultaneously 33kHz (32768Hz) and 131kHz (131072Hz) both signals transmitted simultaneously 33kHz (32768Hz)  
3.4  Output Signal Level: Selectable Standard or Boost Mode
Note: Transmitter will always power up in standard mode
 
3.5  Audio output: Standard and Mute options
Audio output change to indicate a good connection
 
3.6  Power Options: Alkaline or NiMH – requires 4 off D type cells  
3.7   Battery Life: 40 hours continuous in standard mode or 15 hours continuous in Boost mode using Direct Connection Method 28 hours continuous in standard mode or 9 hours continuous in Boost mode using Induction method  
4.  Physical Characteristics
4.1  Construction: Injected Molded ABS Plastic  
4.2  Weight: 2.75kg (6lbs) with batteries and tool tray fitted  
4.3  Dimensions: 27.5cm (10.8”) x 17cm (6.7”) x 20cm (7.8”)  
4.4  Ingress Protection Rating: IP54  
4.5  Audio Option: Built-in water-resistant speaker  
4.6  Operating Temperature: -20°C to 50°C/-4°F to 122°F  
4.7  Storage Temperature: -40°C to 70°C/-40°F to 158°F  
4.8  External Connection: XLR type for connection of direct connection lead, transmitter clamp and accessories  
5.  Warranty and Maintenance
5.1  Manufacturer’s warranty duration: 1 year standard  
5.2  Recommended service schedule: Annual, or at the beginning / end of a lease period if earlier  
5.3  Storage recommendation: Store in a clean and dry environment.
Ensure all terminals and connection sockets are clean, free of debris and corrosion and are undamaged.
 
5.4  Cleaning: Clean with a soft, moistened cloth. Do not use:
•  Abrasive materials or chemicals
•  High pressure jets of water
If using this equipment in foul water systems or other areas where biological hazards may be present, use an appropriate disinfectant.
 
6.  Certification and Compliance
6.1     Standards:    
Safety: EN 60950-1:2006+A2:2013  
  EN 60950-22:2006  
EMC: EN 61326-1:2013  
  EN 300 330-2 (V1.5.1)  
  EN 301 489-3 (V1.6.1)  
  EN 301 489-17 (V2.2.1)  
6.2    European directives: Radio Equipment 2014/53/Eu ROHS Directive: 2011/65/EU
Declaration of conformity is available from www.radiodetection.com
 
6.3    Radio: FCC, IC  
6.4    Environmental: WEEE compliant ROHS compliant  
6.5    Manufacturing: ISO 9001:2008  
7.  Compatible Accessories
Accessory Part description Part number  
7.1     Genny Clamp Available in 2' (50mm), 4' (100mm), 5' (130mm) and 8.5' (215mm) diameters. 10/GENNY-CLAMP-XX (XX= 50, 100, 130, 215)  
7.2     Extension Rod 25" (630mm) length, non-conductive, nylon extension rod. 10/TX-CLAMP-EXTROD  
7.3     Earth Extension Lead 33' (10m) Earth Extension Lead 10/TX-EARTHLEAD  
7.4     Earth Stake Provides an earth return for Genny transmitter. 10/GENNY-EARTHSTAKE  
7.5     Neodymium Magnet For attaching direct connect lead metal pipes etc. 10/TX-MAGNET  
7.6     Direct Connection Lead Directly connecting Genny signal to utility. 10/GENNY-DC-LEAD  
7.7     Live Plug Connector (LPC) Applies Genny signal to mains wiring via mains socket. 10/GENNY-LPC-UK
10/GENNY-LPC-EUR
10/GENNY-LPC-ROW
 
7.8     Live Cable Connector (LCC) Applies Genny signal to live mains wiring. 10/GENNY-LCC  

Description

Radiodetection Genny4 and Electricians Accessory Pack 10/ELECPACK4-UK

The Genny4 provides a class-first simultaneous dual-frequency signal output. Alongside the familiar 33kHz signal for general purpose locates, the Genny4 transmits a specialised Small Diameter Locate frequency which facilitates location of utilities such as telecoms and street lighting, including spurs. For difficult locates, the Signal Boost function enables the Genny4 signals to travel further and deeper, and couple onto utilities more easily.

The Genny4 offers, alongside its standard power mode, a Signal Boost feature which increases the output signal by up to 10 times allowing you to locate over extra distance and depth. Additionally, the simultaneous Small Diameter Locate frequency design aids detection of smaller cables including spurs. 

Kit Contents:

  • Genny4 Signal Generator
  • Live plug connector (UK plug)
  • 100mm (4") clamp
  • Soft carry bag

Radiodetection Genny4 Dual Frequency Generator

The Genny4 provides a class-first simultaneous dual-frequency signal output. Alongside the familiar 33kHz signal for general purpose locates, the Genny4 transmits a specialised Small Diameter Locate frequency which facilitates location of utilities such as telecoms and street lighting, including spurs. For difficult locates, the Signal Boost function enables the Genny4 signals to travel further and deeper, and couple onto utilities more easily.

The Genny4 offers, alongside its standard power mode, a Signal Boost feature which increases the output signal by up to 10 times allowing you to locate over extra distance and depth. Additionally, the simultaneous Small Diameter Locate frequency design aids detection of smaller cables including spurs. 

About Radiodetection 

Radiodetection is a leading global developer and supplier of equipment used by Utility companies and excavators to accurately locate and avoid damage to buried infrastructure networks. At Radiodetection, we work with our customers to ensure they have the knowledge and equipment they need to locate, survey, maintain and protect critical buried infrastructure. 
Our customers benefit from improved operational efficiency and business continuity provided by a comprehensive distribution network offering local knowledge, training and support. Our digital solutions bring together different technologies to provide a comprehensive understanding of field operations, providing effective asset management. 

Features & Specification

More Information
Key Features Safe Supply Signal Generation, Trace Underground Pipes, Use with Cable Avoidance Tool, Quick and easy to operate, Determine length and depth, Digital Display, Audible Indication, Robust and Weatherproof
Product Stock Status Next Day Delivery (subject to availability)
Manufacturer Radiodetection
Short Description

Genny4 Transmitter Specification

1.  Product Summary
1.1  Product Overview: The Genny signal transmitter has been designed to complement Radiodetection’s C.A.T4 cable avoidance range  
1.2  Product Descriptions: Signal transmitter
Multi-function transmitter Cable and pipe transmitter
 
1.3  Intended Use: Used with C.A.T®4 range of locators for avoiding and tracing buried utilities  
1.4  Supplied With: Tool tray to include direct connection lead, earth stake and neodymium magnet  
2.  Performance
2.1  Maximum output voltage: 23V RMS into an open Circuit  
2.2  Maximum output current: 66mA RMS into a Short Circuit  
2.3  Maximum output power: 1 Watt in Direct Connection Mode  
2.4  Induction output: Magnetic flux Density (B)   1.089 µT @ 500mm  
3.  Transmit Functions and Operation
Transmits a signal or simultaneous signals to aid location of cable and pipes, including smaller diameter cables such as telecom or CATV
3.1   Operation: Push button control by pressing appropriate push button
On / off, speaker volume control and Boost button for selecting standard or Boost output level
 
3.2  LED Indication: Indicates Boost output mode selection and battery low warning indicator  
3.3  Operating Modes:
Direct Connection Mode: Transmitter Clamp Mode: Induction Mode:
33kHz (32768Hz) and 131kHz (131072Hz) both signals transmitted simultaneously 33kHz (32768Hz) and 131kHz (131072Hz) both signals transmitted simultaneously 33kHz (32768Hz)  
3.4  Output Signal Level: Selectable Standard or Boost Mode
Note: Transmitter will always power up in standard mode
 
3.5  Audio output: Standard and Mute options
Audio output change to indicate a good connection
 
3.6  Power Options: Alkaline or NiMH – requires 4 off D type cells  
3.7   Battery Life: 40 hours continuous in standard mode or 15 hours continuous in Boost mode using Direct Connection Method 28 hours continuous in standard mode or 9 hours continuous in Boost mode using Induction method  
4.  Physical Characteristics
4.1  Construction: Injected Molded ABS Plastic  
4.2  Weight: 2.75kg (6lbs) with batteries and tool tray fitted  
4.3  Dimensions: 27.5cm (10.8”) x 17cm (6.7”) x 20cm (7.8”)  
4.4  Ingress Protection Rating: IP54  
4.5  Audio Option: Built-in water-resistant speaker  
4.6  Operating Temperature: -20°C to 50°C/-4°F to 122°F  
4.7  Storage Temperature: -40°C to 70°C/-40°F to 158°F  
4.8  External Connection: XLR type for connection of direct connection lead, transmitter clamp and accessories  
5.  Warranty and Maintenance
5.1  Manufacturer’s warranty duration: 1 year standard  
5.2  Recommended service schedule: Annual, or at the beginning / end of a lease period if earlier  
5.3  Storage recommendation: Store in a clean and dry environment.
Ensure all terminals and connection sockets are clean, free of debris and corrosion and are undamaged.
 
5.4  Cleaning: Clean with a soft, moistened cloth. Do not use:
•  Abrasive materials or chemicals
•  High pressure jets of water
If using this equipment in foul water systems or other areas where biological hazards may be present, use an appropriate disinfectant.
 
6.  Certification and Compliance
6.1     Standards:    
Safety: EN 60950-1:2006+A2:2013  
  EN 60950-22:2006  
EMC: EN 61326-1:2013  
  EN 300 330-2 (V1.5.1)  
  EN 301 489-3 (V1.6.1)  
  EN 301 489-17 (V2.2.1)  
6.2    European directives: Radio Equipment 2014/53/Eu ROHS Directive: 2011/65/EU
Declaration of conformity is available from www.radiodetection.com
 
6.3    Radio: FCC, IC  
6.4    Environmental: WEEE compliant ROHS compliant  
6.5    Manufacturing: ISO 9001:2008  
7.  Compatible Accessories
Accessory Part description Part number  
7.1     Genny Clamp Available in 2' (50mm), 4' (100mm), 5' (130mm) and 8.5' (215mm) diameters. 10/GENNY-CLAMP-XX (XX= 50, 100, 130, 215)  
7.2     Extension Rod 25" (630mm) length, non-conductive, nylon extension rod. 10/TX-CLAMP-EXTROD  
7.3     Earth Extension Lead 33' (10m) Earth Extension Lead 10/TX-EARTHLEAD  
7.4     Earth Stake Provides an earth return for Genny transmitter. 10/GENNY-EARTHSTAKE  
7.5     Neodymium Magnet For attaching direct connect lead metal pipes etc. 10/TX-MAGNET  
7.6     Direct Connection Lead Directly connecting Genny signal to utility. 10/GENNY-DC-LEAD  
7.7     Live Plug Connector (LPC) Applies Genny signal to mains wiring via mains socket. 10/GENNY-LPC-UK
10/GENNY-LPC-EUR
10/GENNY-LPC-ROW
 
7.8     Live Cable Connector (LCC) Applies Genny signal to live mains wiring. 10/GENNY-LCC  

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration 

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT £4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays)  – UK Mainland only - Zones A & B  - ANY order value - Order by 2:00pm £7.75
Saturday ANYTIME Delivery - Order by 2:00pm £9.95
 

 

 

 

 

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

  • Zones A & B  - Mainland delivery rates apply. 
  • Zone C - Scottish Highlands (Charges are calculated at the checkout).
  • Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
  • Zone E - Northern Ireland (Charges are calculated at the checkout).
  • Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA