Megger PVK320 Photovoltaic Kit 1002-550
Megger PVM210 Irradiance Meter Specifications | |
Display | 3 and ¾ digits LCD with maximum reading of 3999 |
Range | 1999W/m² / 634 BTU (ft²*h) |
Accuracy | Typically within ±10W/m² (±3BTU) or ±5% (whichever is greater) Additional temperature-induced error: ±0.38W/m²/°C (±0.12 BTU/°C) from 25°C |
Angular Accuracy | Cosine corrected <5% for all angles <60° |
Accuracy | <±3% per year |
Resolution | 0.1W/m²/0.1 BTU |
Sampling Time | Approx 0.25 seconds |
Over Input | Displays shows 'OL' |
Operating Temperature | 5 to 40°C, below 80% RH |
Storage Temperature | -10 to 60°C, below 70% RH |
Dimensions | 134 x 48 x 27mm |
Weight | 90g |
EMC | EN61326 |
Battery Life | 50 hours (approx) |
Auto Off | After 15 minutes of inactivity |
Batteries | 2 x 1.5V AAA/MN2400/LR03 |
Megger AVO410 Multimeter Specifications |
||
---|---|---|
AC/DC Voltage | ||
Range | DC Accuracy | AC Accuracy |
600.0mV | ±0.5% + 2 digits | 50Hz/60Hz sine wave for 600.0mV range, ± (0.9% + 5 digits) 50 to 500Hz *1 |
6.000V | ||
60.00V | ||
600V | ||
DC 1000V / AC 750V | ||
Overvoltage Protection | DC 1000V or AC | |
Input Impedance | 10MΩ // less than 100pF | |
CMRR (Common Mode Rejection Ratio/Normal Mode Rejection Ratio) |
VAC: CMRR>60dB at DC, 50Hz/60Hz | |
VDC: CMRR > 10dB at DC, 50/60Hz | ||
NMRR: >50dB at DC, 50/60Hz | ||
AC Conversion Type | AC conversions are AC couple True RMS responding, calibrated to the sine wave input | |
Note | *1 ) The basic accuracy is specified for a sine wave below 4000 counts. Over 4000 counts, add 0.6% to the accuracy. For non-sine waves below 2000 counts, refer to the following for accuracy: ±1.5% addition error for C.F from 1.4 to 3 |
|
Crest Factor | C.F = peak/rms | |
AC/DC Current | ||
Range | DC Accuracy | AC Accuracy |
600.0μA | ±(1.0% + 2 digits) | N/A |
6000μA | ||
6.000A | ±(1.5% + 6 dgt) 50Hz - 500Hz *1 | |
10.00A | ||
Overload Protection | A Input: 10A (500V) fast blow fuse | |
μA Input: 600V rms | ||
*1) AC Conversion Type | Conversion type and additional specification are the same AC/DC voltage | |
Resistance | ||
Range | Accuracy | Overload Protection |
600.0Ω * 2 | ±(0.7% + 2 digits) | 600V rms |
6.000kΩ | ||
60.00kΩ | ||
600.0kΩ | ||
6.000MΩ | ±(1.0% + 2 digits) | |
60.00MΩ * 1 | ±(1.5% + 2 digits) | |
*1) | Less than 20Hz, the sensitivity is 1.5V rms | |
*2) | Max sensitivity <5V AC rms | |
Capacitance | ||
Range | Accuracy | |
6.000nF | ±(1.9%) + 8 digits | |
60.00nF | ||
600.0nF | ||
6.000μF | ||
60.00μF | ||
600.0μF | ||
6.00mF* | ||
Overload Protection | 600V rms | |
* | <100 digit of reading rolling | |
General Specifications | ||
Display | 6000 counts, updates 1.5/sec | |
Polarity Indication | Automatic, positive implied, negative indicated | |
Overrange Indication | "OL" or "-OL" | |
Low Battery Indication | Displayed when the battery voltage drops below operating voltage | |
Auto Power Off | Approx 10 minutes | |
Operating Conditions | Non-condensing ≤10 °C, 11 °C ~ 30 °C (≤80% R.H) 31 °C ~ 40 °C (≤75% R.H), 41 °C ~ 50 °C (≤45% R.H) |
|
Storage Temperature | -20 to 60°C, 0 to 80% RH when battery removed from the meter | |
Temperature Coefficient | 0.15 x (Spec.Acc'y) / °C, <18°C or >28°C | |
Safety | IEC 61010 CAT IV 600V | |
Power Requirements | Standard 9V battery: PP3, NEDA 1604, IEC6422 or JIS006P | |
Battery Life | Alkaline: 300 hours | |
Dimensions (W x H x D) | 76 x 158 x 38mm without holster | |
82 x 164 x 44mm with holster | ||
Weight | 522g |
Description
PVK320 Photovoltaic Kit 1002-550
Irradiance meter, multimeter and MC3/MC4 test leads make this a great addition to your PV toolkit.
Megger PVK320 Kit Comprises:
- PVM210 irradiance meter
- AVO410 CATIV TRMS multimeter
- C4 solar connectors to 4 mm standard plug test leads
- MC3 to MC4 adapter test leads
- PV kit storage pouch
The Megger PVK320 photovoltaic kit offers additional instrumentation in the form of a PVM210 irradiance meter, a CAT IV 10 A DC AVO410 multimeter, and a kit of specialist solar test leads. This kit is particularly useful for installing, commissioning, and testing photovoltaic installations and is ideal for providing extra instrumentation to accompany the usual electrician’s test equipment, such as the Megger MFT1730 and MFT1835 multifunction testers.
The PVK320 kit offers the solar/photovoltaic engineer the multimeter option of verifying, with the PVM210 irradiance meter, the stated short circuit current as provided by the manufacturer of the solar panel as required by published standards. The PVM210 is a pocket-size instrument that has both solar detector and meter combined in one unit that permits single-handed use, ideal for working at height and on sloping roofs.
The AVO410 multimeter features 1000 V DC / 750 V AC and 10 A AC / DC ranges. The meter has a CAT IV 600 V safety rating and true RMS readings are possible on the AC ranges. Additional functions include resistance, frequency, and capacitance
In addition to the silicon multimeter test leads supplied with the AVO410. two pairs of specialist solar test leads are included in the PVK320 kit. The first pair of leads comprise of 1.3m test leads terminated at each end with standard 4 mm plugs while the other ends are terminated with the typical MC4 type solar panel connector. Where panels are fitted that utilise MC3 connectors, a pair of MC3 to MC4 0.2 metre adapter leads are supplied for convenience.
PVM210 Irradiance meter
The PVM210 is a pocket-size instrument that has both solar detector and meter combined in one unit that permits single-handed use, ideal for working at height and on sloping roofs.
The unit has a 3¾ digit display and a maximum range of 1999 W/m². A hold function allows easy measurements of solar power.
AVO410 CAT IV multimeter
The AVO410 multimeter features 1000 V DC / 750 V AC and 10 A AC / DC ranges. The meter has a CAT IV 600V safety rating and true RMS readings are possible on the AC ranges. Additional functions include resistance, frequency and capacitance.
The additional functions would also prove to be of use in other sections of the photovoltaic installation. The meter is supplied in a tough rubberised holster that provides an extra degree of protection.
Specialist PV test leads
In addition to the silicon multimeter test leads supplied with the AVO410 two pairs of specialist solar test leads are included in the PVK320. The first pair of leads comprise of 1.3 metre test leads terminated at each end with standard 4 mm plugs while the other ends are terminated with the typical MC4 type solar panel connector.
Where panels are fitted that utilise MC3 connectors, a pair of MC3 to MC4 0.2 metre adapter leads is supplied for convenience.
To provide easy storage, the kit comes with a zipped pouch.
isswww and Megger
The extensive Megger product portfolio provides electrical test equipment for an exceptionally wide range of applications at any point of the electricity network. From small handheld low voltage equipment such as multifunction installation testers through to high voltage asset test equipment like insulation resistance testers, circuit breaker analysers, protection relay test systems to transformer condition measurement devices.
Megger designs and manufactures portable electrical test equipment in factories located in Germany, Sweden, the UK, and USA. Megger products help you install, improve efficiency, reduce cost and extend the life of you or your customers’ electrical assets.
Established in the late 1800s, the company has been designing and making test and measurement instruments that perform electrical measurements for preventative maintenance, troubleshooting and commissioning for decades. Megger products have supported customers all over the world to improve their facilities’ efficiency, reduce costs, extend the life of apparatus and through trending and analysis, anticipate equipment failure and future performance.[Text Wrapping Break]Being a brand synonymous with the industry and a cornerstone pioneer of many of today’s everyday items of test equipment, ISSWWW are proud to bring you Megger’s full range of equipment and services, now and into the future.
Features & Specification
Key Features | Carry Bag Included, Irradiance Meter Included, Essential solar test equipment, Inclination Sensor, Range: 1999 W/m2 / 634 BTU, Resolution: 0.1 W/m2 / 0.1 BTU | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Manufacturer | Megger | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Short Description |
|
Delivery
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
Service | Price |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA