This instrument comes complete with your choice of free gift from the drop-down menu above. Choose from a calibration voucher for next 
year or a 50m R2 wander lead. How about any one of the IET Guidance Notes, or a quality two-pole tester? 
Whatever you choose you can be sure you're getting a fantastic deal at Instrument Sales & Service.

Metrel MI3132 EV Tester

*Important Calibration Information: 

This instrument comes complete with the manufacturer’s calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed. If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply. 

Metrel MI3132 Comes Supplied With:

• Instrument MI 3132 EV Tester
• A 1551 Soft-carrying bag
• A 1707 Set of carrying straps
• A 1782 4-wire test lead, 2 x 2 m, 2 x 5 m
• A 1781 3-wire test lead, 3 x 1.5 m
• A 1780 2-wire test lead, 2 x 1.5 m
• A 1014 Test probe, black
• A 1016 Test probe, red
• A 1298 Test probe, brown
• A 1453 Test probe, grey
• A 1013 Crocodile clip, black, 2 pcs
• A 1064 Crocodile clip, red, 2 pcs
• A 1309 Crocodile clip, green
• A 1727 USB cable
• A 1567 Li-ion battery pack, 7.2 V, 4400 mAh
• A 1569 Power supply adapter 12 V, 3 A
• Instruction manual (short version)
• Calibration Certificate
• SW 1201 PC SW Metrel ES Manager
  
  

Overview:

MI 3132 EV tester is a portable, battery-powered test instrument with excellent IP protection and designed especially for electric vehicle testing. The instrument supports the latest standard UN ECE R100 Annex 4A, 4B, intended for the measurement of insulation resistance for an electric vehicle. The instrument is ergonomic in design with an intuitive user interface, encompassing a memory organizer and fully programmable AUTO SEQUENCEs, managed through a large colour touchscreen display. Besides those, the instrument supports a wide range of tests and measuring functions, including 2 A Micro Ohm measurement, online voltage monitoring, insulation tests up to 1500 V, as well as functional and visual inspections.

Key features:

• Insulation resistance measuring according to UN ECE R100 measuring using internal DC source;
• Performing accurate four-wire measurements with Kelvin clamps and up to 2 A measuring current;
• Settable duration and current direction (unidirectional or bidirectional) in the Micro Ohm measurement;
• Insulation range: wide range of insulation test voltages from 50 V to 1500 V, resistance measuring range up to 3 GΩ;
• Overvoltage category 1000 V CAT III;
• 4.3’’ color LCD display with touch screen;
• Programmable AUTO SEQUENCEs;
• High degree of protection for outdoor use and rough environment;
• DC resistance measurements;
• Support for single or automated measurements;
• Built-in charger and rechargeable Li-Ion batteries as a standard accessory;
• BT communication with PC, via built-in BT module;
• PC SW Metrel ES Manager for measurement pre and post-processing: preparation of the test structure, result download, tree-view, table view and graphical view, storing and printing.
  
  

Measuring functions:

• Insulation measurements according to UN ECE R100 and ISO 6469-3 with own REESS as DC voltage source;
• Insulation resistance with DC voltage from 50 V to 1500 V;
• DC voltage measurement;
• TRMS voltage and frequency measurements;
• Four wire Micro Ohm measurements with
• 2 A DC test current;
• Low Ohm measurements with 7 mA and 200 mA DC test current;
• Visual safety and functional inspections.
  
  

Applications:

e-Mobility

• Electrical Vehicles first safety inspection according to UN ECE R100

Preventative maintenance

• Voltage measurements
• Frequency measurements
• Battery systems

General purpose

• Industrial testing
  
  

Standards applied:

Mobile Units Electrical Safety

• UN ECE R 100 Uniform provisions concerning the approval of vehicles with regard to specific requirements for the electric power train [2015/505]
• ISO 6469-3 - Electrically propelled road vehicles Safety specification Part 3: Electrical safety

Instrument safety for the user

• Directive EMC 89/336/EE on electromagnetic compatibility
• IEC/EN 61010 Safety requirements for electrical equipment for measurement, control, and laboratory use - series
• IEC/EN 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
• IEC/EN 61010-031 Amendment 1 - Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 031: Safety requirements for hand-held and hand-manipulated probe assemblies for electrical test and measurement.

EMC safety

• IEC/EN 61326 Electrical equipment for measurement, control and laboratory use - EMC requirements - series
• IEC/EN 61326-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
  
  

isswww and Metrel 

Metrel was established in 1957 as a factory for the production of electrical measuring instruments and components for the domestic market and grew from there to become one of the world’s leading manufacturers of measuring and testing equipment. They are one of the few companies in the industry that develops and manufactures products at a single location, starting with design and ending with final assembly, quality control, and calibration.  

Bank/Public Holidays

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

• Zones A & B  - Mainland delivery rates apply. 
• Zone C - Scottish Highlands (Charges are calculated at the checkout).
• Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
• Zone E - Northern Ireland (Charges are calculated at the checkout).
• Zone F - Republic of Ireland (Charges are calculated at the checkout).
  
  

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA