Metrel MI3100-S EurotestEASI Multifunction Tester

*Calibration Options:

This instrument comes complete with a manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time lapsed. If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Metrel MI3100-S Comes Supplied With:

• Instrument MI 3100s EurotestEASI
• Power supply adapter with mains cable + 6 NiMH rechargeable batteries, size AA
• Test probe, 3 pcs (brown, blue, green)
• Crocodile clip, 3 pcs (brown, blue, green)
• Test lead 3x1.5m
• UK measuring cable
• Soft carrying bag
• Soft carrying neck belt
• Short instruction manual
• Instruction manual on storage media
• Handbook on storage media
• Calibration certificate
  
  

Overview

MI 3100 s EurotestEASI is a fast, accurate, and easy-to-use multifunctional measuring instrument that performs a basic set of installation safety tests according to IEC/EN 61557. Besides, the MI 3100 s EurotestEASI enables online voltage monitoring, phase sequence testing, and earth resistance measurement. EurotestEASI is equipped with integrated characteristics of fuses and RCDs for PASS / FAIL evaluation of test results.

Key Features:

• Built-in help screens for referencing on site.
• Built-in fuse tables for automatic evaluation of the line/loop impedance result.
• On-line voltage monitoring: monitors all 3 voltages in real-time.
• Polarity swap: automatic polarity reversal on continuity test.
• Trip Lock function: loop impedance test without tripping the RCD.
• Built-in charger unit has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries.
• RCD auto: automated RCD testing procedure.
  
  

Measuring Functions:

• Insulation resistance with DC voltage from 50 V to 1000 V;
• Continuity of PE conductors with 200 mA test current with polarity change;
• Continuity of PE conductors with 7 mA test current without RCD tripping;
• Line impedance;
• Loop impedance;
• Loop impedance with Trip Lock RCD function;
• TRMS voltage and frequency;
• Phase sequence;
• RCD testing (general and selective, type AC, A, F);
• Earth resistance (3-wire method).
  
  

Standards Applied:

Building LV Installation

• EISinsp Competences: Low Voltage Electrical Installation Safety Inspection
• EISc Competences: Low Voltage Electrical Installation Safety for Contractors and Maintainers
• IEC/EN 60364 Electrical Installations for Buildings series
• IEC/EN 60364-6 Electrical Installations for Buildings - Verification
• IEC/EN 60364-4-41 Electrical Installations for Buildings - Protection against electric shock
• IEC/EN 60755 General safety requirements for residual current operated protective devices
• IEC/EN 61008-1 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs)
• IEC/EN 61557 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring, or monitoring of protective measures - series
• IEC/EN 61557-1 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring, or monitoring of protective measures - Part 1: General requirements
• IEC/EN 61557-2 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring, or monitoring of protective measures - Part 2: Insulation resistance
• IEC/EN 61557-3 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring, or monitoring of protective measures - Part 3: Loop impedance
• IEC/EN 61557-6 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring, or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems
• IEC/EN 61557-7 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring, or monitoring of protective measures - Part 7: Phase sequence
• IEC/EN 61557-10 Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring, or monitoring of protective measures - Part 10: Combined measuring equipment for testing, measuring, and monitoring of protective measures
• VDE 0413 (IEC 61557) Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring, or monitoring of protective measures - series
• AS / NZ 3017 Electrical installations – Verification guidelines
• BS 7671 IEE Wiring Regulations (18th edition)
• CEI 64.8 V4 rated electrical equipment not exceeding 1,000 VAC and 1,500V DC current
  
  

Earthing and lightning protection

• LPSinsp Competences: Lightning Protection of Buildings Inspection
• LPSc Competences: Lightning Protection of Buildings for Contractors and Maintainers
• IEC 62305 Protection against lightning - series
• IEC/EN 61557-5 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring, or monitoring of protective measures - Part 5: Resistance to earth
• IEC/EN 61557-4 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring, or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding
  
  

Instrument safety for the user

• IEC/EN 61010 Safety requirements for electrical equipment for measurement, control, and laboratory use - series
• IEC/EN 61010-1 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
  
  

EMC safety

• IEC/EN 61326 Electrical equipment for measurement, control, and laboratory use - EMC requirements - series
• IEC/EN 61326-1 Electrical equipment for measurement, control, and laboratory use - EMC requirements - Part 1: Ge

isswww and Metrel 

Metrel was established in 1957 as a factory for the production of electrical measuring instruments and components for the domestic market and grew from there to become one of the world’s leading manufacturers of measuring and testing equipment. They are one of the few companies in the industry that develops and manufactures products at a single location, starting with design and ending with final assembly, quality control, and calibration.

Bank/Public Holidays

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

• Zones A & B  - Mainland delivery rates apply. 
• Zone C - Scottish Highlands (Charges are calculated at the checkout).
• Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
• Zone E - Northern Ireland (Charges are calculated at the checkout).
• Zone F - Republic of Ireland (Charges are calculated at the checkout).
  
  

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA