Metrel A1532 EVSE Electrical Vehicle Supply Equipment Adapter
| Metrel A1532 EVSE Electric Vehicle Supply Tester | |
| Input voltage | 400 V (3-phase) |
| Frequency | 50 Hz |
| Test current | 13 A |
| Proximity Pilot (PP) simulation |
Open circuit |
| Control Pilot (CP) simulation |
State A (not connected) |
| Overvoltage category | 300 V CAT II |
| Protection degree | IP 40 |
| Pollution degree | 2 |
| Protection classification | Double insulation |
| Altitude | 3000 m above sea level |
| Dimensions (L x W x H) | 200 x 100 x 70 mm |
| Test lead length | 0.5 m |
| Weight | 0.82 kg |
| Working temperature range | 0 °C … 40 °C @ 95 % RH, non-condensing |
| Storage temperature range | -10 °C … +70 °C |
| Maximum storage relative humidity |
90 % RH (-10 °C … +40 °C) |
Description
Metrel A1532 EVSE Electrical Vehicle Charging Point Adapter
The A1532 EVSE adapter is a special accessory intended for testing Mode E3 Electric Vehicle Supply Equipment (EVSE) together with supported METREL installation testers.
It is used for verification of electrical safety and functional testing of EVSE. It is intended for testing Mode 3 EV supply equipment with a type 2 connector.
If used together with the MI 3152 EurotestXC’s AUTO SEQUENCE®, the complete EVSE charging station can be tested (state-by-state) electrically and functionally with a push of a button. It is possible to create a professional station-based report with MESM.
Key Features:
- Banana socket outputs for connection to a 3-phase installation tester.
- Voltage indicators on EVSE output.
- Proximity Pilot resistance selector for simulation of EV cable presence and current rating detection.
- Control Pilot resistance selector for simulation of electric vehicle status.
- Socket output for connection to a 1-phase installation tester (Phase 1, Neutral, PE).
- Type 2 Male Plug connector for connection to EVSE.
- 6 mA EV RCD support.
- Functional tests support*.
EVSE AUTO SEQUENCE® support*. - MESM report creation**.
- Partial support:
- 6 mA EV RCD
- EVSE report**
- Full support:
- Functional test support
- EVSE AUTO SEQUENCE® support
The A1532 Comes Supplied With:
- Instrument EVSE adapter
- Small soft carrying bag
- Detailed information and specification sheet.
Typical Applications:
- On-site testing of EVSE charging station installation.
- Initial and periodic testing of private, semi-private and public EVSE charging stations.
Standards:
- Safety EN 61010-1
- Functionality EN 61851-1
Compatibility List:
| Multifunction Installation Tester | A 1532 EVSE Adapter | 6mA RCD | Functional Test | EVSE AUTOSEQUENCE | EVSE Report |
| MI 3155 Eurotest XD | Y | Y | Y | Y | Y |
| MI 3152 Eurotest XC | Y | Y | Y | Y | Y |
| MI 3152H EurotestXC 2.5kV | Y | Y | Y | Y | Y |
| MI 3102 BT Eurotest XE | Y | Y | Y | ||
| MI 3102H BT EurotestXE 2.5kV | Y | Y | |||
| MI 3125 BT Eurotest COMBO | Y | Y | Y | ||
| MI 3100 SE EurotestEASI | Y | ||||
| MI 3100 s EurotestEASI | Y | ||||
| MI 3125 EurotestCOMBO | Y | ||||
| MI 3105 EurotestXA | Y | ||||
| MI 3101 EurotestAT | Y |
What is EVSE and Why Does Your Electric Car Need it?
While drivers of electric cars just need to find an electrical outlet that matches the plug on the end of their charging lead, a new charging standard brings a little more sophistication to the mix, in the form of the Electric Vehicle Supply Equipment (EVSE) control.
EVSE is a protocol to help keep you and your electric car safe while charging. Using two-way communication between the charger and car, the correct charging current is set based on the maximum current the charger can provide as well as the maximum current the car can receive. As part of the protocol, a safety lock-out exists, preventing current from flowing when the charger is not connected to the car. It ensures that if a cable is not correctly inserted, power will not flow through it.
EVSE can also detect hardware faults, disconnecting the power and preventing battery damage, electrical shorts and fire.
About Metrel
Metrel was established in 1957 as a factory for the production of electrical measuring instruments and components for the domestic market and grew from there to become one of world’s leading manufacturers of measuring and testing equipment. They are one of the few companies in the industry that develops and manufactures products at a single location, starting with design and ending with final assembly, quality control and calibration.
Features & Specification
| Key Features | 6 mA EV RCD support, Banana socket outputs, EVSE output, Tests Mode 3 EV Supply, Case Included | ||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||
| Manufacturer | Metrel | ||||||||||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||||||||||
Delivery
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA