Megger TDR1000/3 Time Domain Reflector 1001-788

£1,416.00

Megger TDR1000/3 Time Domain Reflector
Ranges	10 m, 25 m, 100 m, 250 m, 1000 m, 2500 m, 5000 m (30 ft, 75 ft, 300 ft, 750 ft, 3000 ft, 7500 ft, 15000 ft)
Accuracy	±1% of range ± pixel at 0.67 VF [Note- The measurement accuracy is for the indicated cursor position only and is conditional on the velocity factor being correct.]
Resolution	1% of range
Refresh Rate	Trace updates 3 times per second
Input Protection	This instrument complies with IEC61010-1 for connection to live systems up to 150 V CAT IV when used with the optional fused test lead set.
Output Pulse	5 volts peak to peak into open circuit. Pulse widths determined by range and cable
Gain	Set for each range with three user selectable steps (in Manual operating mode)
Velocity Factor	Variable from 0.2 to 0.99 in steps of 0.01
Tx Null	Automatic
Power Down	Automatic after 5 minutes with no key press
Backlight	Stays on for 1 minute with no key press
Batteries	Five LR6 (AA) type batteries, Manganese alkali or nickel metal-hydride cells
Battery Life	Up to 14 hours (Typical)
Mechanical	The instrument is designed for use indoors or outdoors and is rated to IP54.
Case Dimensions	230 mm (9 in) x 115 mm (4.5 inches) x 48 mm (2 inches)
Instrument Weight	0.6 kg (1.32 lbs)
Case Material	ABS
Connectors	Two 4 mm-safety terminals
Test Leads	0.5 metres long fitted with 500 mA FF HBC 1 kV 50 kA Fuse
Display	256 x 128 pixel Graphics LCD
Operating Temperature	-15 ºC to +50 ºC (5 ºF to 122 ºF)
Storage Temperature	-20 ºC to 70 ºC (-4 ºF to 158 ºF
Safety	When using the optional fused test lead set this instrument complies with IEC61010-1 for connection to live systems with less than 300 V between the terminals and up to 150 V CAT IV to earth
EMC	Complies with Electromagnetic Compatibility Specifications (Light industrial) BS EN 61326-1, with a minimum performance of ‘B’ for all immunity tests

Description

Megger TDR1000/3 TDR Time Domain Reflector 1001-788

The TDR1000/3 is a hand held, compact Time Domain Reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft maximum range depending on velocity factor selected and cable type. Four output impedances are available (25, 50, 75, and 100 Ω) and a velocity factor between 0.2 and 0.99 will meet any cable test requirements. The TDR1000 has a simple selection option which together with a 4 way control switch offers an intuitive operation for the user.

Megger TDR1000/3 Comes Supplied With:

Hard carry case
Miniature Clip Test Lead Set
User guide CD

Key features:

Simple operation.
AUTO set up for instant use.
Ultra fast pulse for near end fault identification.
Trace HOLD feature to allow comparison between cables.
IP54 rating offers real life working.
Designed for use on all metallic cable pairs.
Backlit graphics monochrome LCD (256 x 128)
Adjustable display contrast
Resolution to 0.1 m
For use on Telecom TNV-3 circuit, or 150 V CAT IV power circuits
Power blocking filter not required
Environmental protection to IP54
Auto selected output impedance (between 25, 50, 75 and 100 Ω)
2 ns pulse for near end fault location
AUTO option selecting gain and pulse for each range
Display distance in metres or feet
Uses five AA (LR6) primary cells

Four output impedances are available (25, 50, 75, and 100 Ω) and a velocity factor between 0.2 and 0.99 will meet any cable test requirements. An AUTO selection option ensures that the most effective parameters are selected depending on the range required, aiding rapid diagnosis of the TDR trace. Dual cursors allow complete flexibility, giving the operator full control and instant indication of distance between two points. A trace HOLD feature also allows comparison between conditions, something not seen on most other handheld TDRs, and a live trace overlay feature adds the ability to compare two traces in real time. Extra high resolution together with whitelight backlight and grey scale tones give the graphical display a vibrancy, aiding the user in identifying key events on the trace.

Features & Specification

More Information

Key Features

Large backlit display, Carry Case Included, IP54 Rated, Trace HOLD Feature, AUTO Set Up, Simple Operation

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Megger

Short Description

Megger TDR1000/3 Time Domain Reflector
Ranges	10 m, 25 m, 100 m, 250 m, 1000 m, 2500 m, 5000 m (30 ft, 75 ft, 300 ft, 750 ft, 3000 ft, 7500 ft, 15000 ft)
Accuracy	±1% of range ± pixel at 0.67 VF [Note- The measurement accuracy is for the indicated cursor position only and is conditional on the velocity factor being correct.]
Resolution	1% of range
Refresh Rate	Trace updates 3 times per second
Input Protection	This instrument complies with IEC61010-1 for connection to live systems up to 150 V CAT IV when used with the optional fused test lead set.
Output Pulse	5 volts peak to peak into open circuit. Pulse widths determined by range and cable
Gain	Set for each range with three user selectable steps (in Manual operating mode)
Velocity Factor	Variable from 0.2 to 0.99 in steps of 0.01
Tx Null	Automatic
Power Down	Automatic after 5 minutes with no key press
Backlight	Stays on for 1 minute with no key press
Batteries	Five LR6 (AA) type batteries, Manganese alkali or nickel metal-hydride cells
Battery Life	Up to 14 hours (Typical)
Mechanical	The instrument is designed for use indoors or outdoors and is rated to IP54.
Case Dimensions	230 mm (9 in) x 115 mm (4.5 inches) x 48 mm (2 inches)
Instrument Weight	0.6 kg (1.32 lbs)
Case Material	ABS
Connectors	Two 4 mm-safety terminals
Test Leads	0.5 metres long fitted with 500 mA FF HBC 1 kV 50 kA Fuse
Display	256 x 128 pixel Graphics LCD
Operating Temperature	-15 ºC to +50 ºC (5 ºF to 122 ºF)
Storage Temperature	-20 ºC to 70 ºC (-4 ºF to 158 ºF
Safety	When using the optional fused test lead set this instrument complies with IEC61010-1 for connection to live systems with less than 300 V between the terminals and up to 150 V CAT IV to earth
EMC	Complies with Electromagnetic Compatibility Specifications (Light industrial) BS EN 61326-1, with a minimum performance of ‘B’ for all immunity tests

Fluke Price Banner

------------------------------------Our Discount Guarantee---------------------------------
Discounts are available on this Megger TDR Test Set. Please contact us
via phone, e-mail or the web forms below for your industry leading price.

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA