Megger MIT400-2 Industrial Maintenance Insulation and Continuity Tester 1004-731
Megger MIT400/2 Series Technical Specifications
Test Voltage | ||
MIT 400/2 | 250, 500 and 1000V | |
MIT 410/2, 420/2 and 430/2 | 50, 100, 250, 500 and 1000V | |
Insulation Accuracy | ||
---|---|---|
Test Voltage | Range | Accuracy |
50V | 10GΩ | ±2% ± 2 digits ± 4.0% per GΩ |
100V | 20GΩ | ±2% ± 2 digits ± 2.0% per GΩ |
250V | 50GΩ | ±2% ± 2 digits ± 0.8% per GΩ |
500V | 100GΩ | ±2% ± 2 digits ± 0.4% per GΩ |
1000V | 200GΩ | ±2% ± 2 digits ± 0.2% per GΩ |
Display Range | Analogue 1GΩ full scale |
|
Resolution | ||
Short Circuit/Charge Current | 2mA +0% to -50% to EN 61557-2 (2007) | |
Open Circuit Voltage Insulation | -0 +2% ±2V | |
Test Current | 1mA at min pass value of insulation to a max of 2mA max | |
Leakage | 10% ± 3 digits | |
Voltage | 3% ±3 digits ±0.5% of rated voltage | |
Timer Control | 60 second countdown timer | |
Note | Above specifications only apply when high quality silicone leads are being used | |
Continuity | ||
Continuity Measurement | 0.01Ω to 999kΩ (0 to 1000kΩ on analogue scale) | |
Continuity Accuracy | ± 3% ± 2 digits (0 to 100 Ω ) ±5% ±2 digits (100 to 500kΩ) (500kΩ to 1MΩ unspecified) Service Error: BS EN 61557-4 (2007) - ± 2.0%, 0.1 Ω - 2 Ω ± 6.8% |
|
Open Circuit Voltage | 5V ±1V | |
Test Current | 200mA (-0mA to +20mA) (0.01Ω to 4Ω) |
|
Polarity | Single polarity (default) / Dual polarity (configurable on setup) | |
Lead Resistance | Null up to 9.00Ω | |
Voltage | ||
Voltage Range | AC: 10mV to 600V RMS sinusoidal (15Hz to 400Hz) DC: 0 to 600V |
|
Volt Range Accuracy | AC: ±2% ±1 digit DC: ±2% ±2 digit Service Error: BS EN 61557-1 (2007) - ± 2.0% ± 2d, 0 V - 300 V AC/DC ± 5.1% |
|
Waveform | Unspecified range: 0 – 10 mV (15 to 400 Hz) For non-sinusoidal waveforms additional specifications apply Non-sinusoidal waveforms: ±3% ± 2 digits >100 mV to 600 V TRMS ±8% ± 2 digits 10 mV to 100 mV TRMS |
|
Frequency | ||
Frequency Measurement Range | 15Hz to 400Hz | |
Frequency Measurement Accuracy | ±0.5% ±1 digit (100Hz to 400Hz unspecified) | |
Capacitance Measurement (MIT420/2 and MIT430/2) | ||
Capacitance Measurement | 1nF to 10μF | |
Capacitance Measurement Accuracy | ±5.0% ± 2 digits (0.1nF to 1nF unspecified) | |
Storage (MIT420/2 and MIT430/2) | ||
Storage Capacity | >1000 test results | |
Data Download | Bluetooth wireless Bluetooth Class II |
|
Range | Up to 10m | |
General Specs | ||
Battery Life | 3000 inuslation tests with duty cycle of 5 seconds ON/55 sec off @ 1000V into 1MΩ | |
Dimensions | Instrument: 228 x 108 x 63mm (9.00 x 4.25 x 2.32inches) | |
Weight | 600g (MIT400/2) (1.32lbs) |
Description
Megger MIT400 Industrial Maintainence Insulation and Continuity Tester
The MIT400 series of insulation and continuity tester offers those working in electrical engineering, the electrical supply industry and in maintenance, repair and servicing of industrial equipment and manufacturing processes a convenient test instrument.
It is also very useful for the checking of the electrical system in hybrid and electric vehicles. the safety and comfort of a modern purpose designed instrument.
A key feature of the design of the tester is its waisted profile making it easily held by operators with the smallest of hands, and it can be used right or left-handed, just as easily. As an added bonus it is supplied with a free calibration certificate included.
MIT400-2 Comes Supplied With:
- Megger MIT400/2 Insulation Tester
- Red/Black Silicone Test Leads with Probes + Clips
- Owners Information CD
- 6 x AA Alkaline Batteries
- Hard Carrying Case
Key Features:
• CATIV 600V applications
• Insulation testing to 1000V and to 200GΩ
• TRMS & DC Voltage measurement
• Continuity testing at 200mA down to 0.01Ω
• Analogue and dual digital display
• Insulation & continuity limit alarms
• PI/DAR and Timer function
• Test result storage
• Bluetooth wireless data transfer
• Free calibration certificate included
isswww and Megger
The extensive Megger product portfolio provides electrical test equipment for an exceptionally wide range of applications at any point of the electricity network. From small handheld low voltage equipment such as multifunction installation testers through to high voltage asset test equipment like insulation resistance testers, circuit breaker analysers, protection relay test systems to transformer condition measurement devices.
Megger designs and manufactures portable electrical test equipment in factories located in Germany, Sweden, the UK, and USA. Megger products help you install, improve efficiency, reduce cost and extend the life of you or your customers’ electrical assets.
Established in the late 1800s, the company has been designing and making test and measurement instruments that perform electrical measurements for preventative maintenance, troubleshooting and commissioning for decades. Megger products have supported customers all over the world to improve their facilities’ efficiency, reduce costs, extend the life of apparatus and through trending and analysis, anticipate equipment failure and future performance.
Being a brand synonymous with the industry and a cornerstone pioneer of many of today’s everyday items of test equipment, ISSWWW are proud to bring you Megger’s full range of equipment and services, now and into the future.
Features & Specification
Key Features | Manufacturer Certificate Included, Resistance Measurement, Continuity Measurement, Test Probe Included, TRMS Measurement | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Manufacturer | Megger | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Short Description | Megger MIT400/2 Series Technical Specifications
|
Delivery
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
Service | Price |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA