Megger MIT220 Insulation and Continuity Tester

£352.80
Megger MIT220 Insulation & Continuity Tester
Insulation Ranges 500V, 250V DC
Measuring Range 10kΩ to 1000MΩ on all ranges
Terminal Voltage On Open Circuit (DC) 0% + 25% of rated voltage
Short Circuit Current 205mA + 10mA - 5mA
Test Current On Load >1mA at minimum pass values of insulation as specified in BS7671, HD384, IEC364 and VDE0413 Part 1
Accuracy (at 20°C) ±3% of reading ± 2 digits up to 10MΩ
±5% of reading ± 2 digits up to 100MΩ
±30% of reading up to 1000MΩ
Continuity  
Measuring Range 0.01Ω to 100Ω (0-50Ω on analogue scale)
Open Circuit Voltage 5V ± 1V
Short Circuit Current 205mA, ±5mA (0 to 10Ω) > 20mA (0-100Ω) 
Accuracy (at 20°) ±0.01Ω to 9.99Ω ±3% ± 2 digits
10.0Ω to 99.9Ω ±5% ± 2 digits
Zero Offset Adjust 0 to 9.99Ω
Continuity Buzzer Operates at <2Ω
Voltmeter <25V AC or DC
Test Inhibit If more than 50V is detected, testing will be inhibited
Range 25V to 600V @ 50/60Hz and DC
Accuracy 25V to 450V AC/DC ±1% ± 1 digit
450V to 600V AC ±2% ± 1 digit
General Specs  
Auto Power Down Operates after 10 minutes if left in standby mode
Temperature and Humidity Operating Range -10 to +55°C (14 to 130°F)
Storage Range -25 to +65°C (-13 to 150°F)
Environmental Protection IP40
Fuse Terminals 500mA (F) 600V, 32 x 6mm ceramic HBC 50kA minimum
Display shows if fuse is ruptured
Safety Meets the requirements of EN61010-1 CAT III 600V phase to earth
Automatic Discharge After an insulation test the item under test will be discharged automatically. Any voltage present will be indicated on the display so that the discharge can be monitored
Power Supply 6 x 1.5V cells IEC LR6 (AA)
Rechargeable NiMH cells may also be used
Battery condition is constantly shown on the display as a four section bar graph
Battery Life 3000 consecutive test (5 seconds per test) on any testung 2Ah batteries
Weight 500gms approx (1.2lbs)
Dimensions 195 x 98 x 40mm (7.7 x 3.9 x 1.6 inches)
E.M.C In accordance with IEC 61326-1

Description

Megger MIT220 Insilation and Continuity Tester


The MIT200 series will find applications in electrical contracting, both on domestic and industrial systems, as well as site maintenance and service departments.

The MIT200 series of insulation and continuity testers are ideal for testing transformers, motors, generators, switchgear, panel building, domestic appliances, power tools etc., as well as fixed electrical wiring systems. Their small size and light weight make them ideal for those engineers that need to carry them for extended periods.

All instruments meet the requirements of most International Standards including VDE 0413 Part 1 and BS 7671 (the 17th Edition of the IEE Wiring Regulations).


Key Features:

  •   Insulation testing to 1000 MΩ
  •   Continuity testing at 200 mA down to 0.01 Ω
  •   Live circuit warning (voltage display) and test inhibit
  •   Digital/Analogue display
  •   Alkaline or rechargeable batteries
  •   –10°C to +55ºC operating temperature
  •   CATIII 600 V
  •   Conforms to EN61557-1
  • Meets the international EN 61557 requirements of the rated test voltage into a 1 mA load. 
  • Digital display of insulation measurement up to 1000 MΩ on a linear or logarithmic analogue arc and a digital display. 
  • Continuity range has 0,01 Ω resolution and a short circuit current in excess of 200 mA. 
  • Automatic continuity testing leaves both hands free. No need to press the test button. 
  • Automatic power-off if left unattended reduced wasted battery life. 
  • Automatic voltage detection avoids accidental contact with dangerously live circuits. 
  • Test lead zero allows compensation for test lead resistance. 
  • Buzzer range operates at <2 Ω.
 
 

Megger MIT Series Selection Chart


 

 


Features & Specification

More Information
Key Features Manufacturer Certificate Included, Continuity Measurement
Product Stock Status Next Day Delivery (subject to availability)
Manufacturer Megger
Short Description
Megger MIT220 Insulation & Continuity Tester
Insulation Ranges 500V, 250V DC
Measuring Range 10kΩ to 1000MΩ on all ranges
Terminal Voltage On Open Circuit (DC) 0% + 25% of rated voltage
Short Circuit Current 205mA + 10mA - 5mA
Test Current On Load >1mA at minimum pass values of insulation as specified in BS7671, HD384, IEC364 and VDE0413 Part 1
Accuracy (at 20°C) ±3% of reading ± 2 digits up to 10MΩ
±5% of reading ± 2 digits up to 100MΩ
±30% of reading up to 1000MΩ
Continuity  
Measuring Range 0.01Ω to 100Ω (0-50Ω on analogue scale)
Open Circuit Voltage 5V ± 1V
Short Circuit Current 205mA, ±5mA (0 to 10Ω) > 20mA (0-100Ω) 
Accuracy (at 20°) ±0.01Ω to 9.99Ω ±3% ± 2 digits
10.0Ω to 99.9Ω ±5% ± 2 digits
Zero Offset Adjust 0 to 9.99Ω
Continuity Buzzer Operates at <2Ω
Voltmeter <25V AC or DC
Test Inhibit If more than 50V is detected, testing will be inhibited
Range 25V to 600V @ 50/60Hz and DC
Accuracy 25V to 450V AC/DC ±1% ± 1 digit
450V to 600V AC ±2% ± 1 digit
General Specs  
Auto Power Down Operates after 10 minutes if left in standby mode
Temperature and Humidity Operating Range -10 to +55°C (14 to 130°F)
Storage Range -25 to +65°C (-13 to 150°F)
Environmental Protection IP40
Fuse Terminals 500mA (F) 600V, 32 x 6mm ceramic HBC 50kA minimum
Display shows if fuse is ruptured
Safety Meets the requirements of EN61010-1 CAT III 600V phase to earth
Automatic Discharge After an insulation test the item under test will be discharged automatically. Any voltage present will be indicated on the display so that the discharge can be monitored
Power Supply 6 x 1.5V cells IEC LR6 (AA)
Rechargeable NiMH cells may also be used
Battery condition is constantly shown on the display as a four section bar graph
Battery Life 3000 consecutive test (5 seconds per test) on any testung 2Ah batteries
Weight 500gms approx (1.2lbs)
Dimensions 195 x 98 x 40mm (7.7 x 3.9 x 1.6 inches)
E.M.C In accordance with IEC 61326-1

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration 

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT £4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays)  – UK Mainland only - Zones A & B  - ANY order value - Order by 2:00pm £7.75
Saturday ANYTIME Delivery - Order by 2:00pm £9.95
 

 

 

 

 

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

  • Zones A & B  - Mainland delivery rates apply. 
  • Zone C - Scottish Highlands (Charges are calculated at the checkout).
  • Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
  • Zone E - Northern Ireland (Charges are calculated at the checkout).
  • Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA