Megger MFT1721 Multifunction Tester 1008-123

£1,128.00

Insulation Test
Output voltage	-0% +20% at rated load or less
Voltage display	±3% ±3 digits ±0.5% of rated voltage
Short circuit current	1.5 mA nominal test current
Test current on load	1 mA at min pass values of insulation
Insulation accuracy
1000 Volts	10 kΩ ~ 999 MΩ ±3% ±2 digits
500 Volts	~ 500 MΩ ±3% ±2 digits >500 MΩ ±10% ±4 digits
250 Volts	10 kΩ ~ 250 MΩ ±3% ±2 digits >250 MΩ ±10% ±4 digits
100 Volts	10 kΩ ~ 100 MΩ ±3% ±2 digits >100 MΩ ±10% ±4 digits
Resistance and continuity
0.01 Ω ~ 99.9 Ω	±2% ±2 digits
100 Ω ~ 99.9 kΩ	±5% ±2 digits
Open circuit voltage	5 V ±1 V
Test current	(0 Ω ~ 2 Ω) 205 mA ±5 mA 15 mA ±5 mA (user selectable)
Loop test
Live to earth/neutral supply	48 V ~ 280 V (45 Hz ~ 65 Hz)
Live to live supply (not MFT1711)	48 V ~ 500 V†† (45 Hz ~ 65 Hz)
L-N/L-L tests	±5% ±5 digits
L-E tests †
0.1 Ω ~ 39.9 Ω	±5% ±5 digits ± noise margin
40.0 Ω ~ 1000 Ω	±10% ±5 digits
Display range	0.01 Ω ~ 1000 Ω
Live to earth PFC range	20 kA
Live to live PSCC range	20 kA
RCD tests
Supply up to 100 mA	48 V ~ 480 V** (45 Hz ~ 65 Hz)
Supply up to 1 A	48 V ~ 280 V
RCD type	Type AC, A, S Type B (pure dc)
No trip test
(1/2xI)	–10% ~ –0%
Trip test
(1xI, 2xI & 5xI)	+0% ~ +10%
Ramp test - Touch voltage
(0 ~ 253 V)	+5% +15% ±0.5 V
Trip time	±1% ±1 ms
Trip current	±5%
Step increments - VAR (variable RCD selection)
10 mA ~ 50 mA	1 mA steps
50 mA ~ 500 mA	5 mA steps
500 mA ~ 1000 mA	10 mA steps
Supply measurement
Voltage	10 V ~ 600 V (15 ~ 400 Hz) True RMS ±3% ± 1 V ±2 digits
Phase rotation indication	L1–L2–L3 & L1–L3–L2
Frequency	15 Hz ~ 99 Hz ±0.5% ±1 digit 100 Hz ~ 400 Hz ±2.0% ±2 digits
Frequency resolution	0.1 Hz
Power supply
MFT1711 and MFT1721:	IEC LR6 type AA alkaline (6 cells - supplied)
MFT1731:	1.2 V NiMH (rechargeable pack of 6 – supplied)
Mains charger for on-board re-charging (4 hours typical) 12 V car charger (cigar lighter lead - optional)
Earth / ground test
Resolution	0.01 Ω
Current	0.45 mA or 4.5 mA
Noise rejection	20 V pk/pk (7 V rms)
Max probe resistances Rp & Rc	100 kΩ @ 50 V 5 kΩ @ 25 V
2 & 3 pole method	(0.01 Ω ~ 1.999 kΩ) ±2.0% ±3 digits ART method (1.00 Ω ~ 1.999 kΩ) ±5.0% ±3 digits**
Stakeless method (1.00 Ω ~ 199 Ω)	±7.0% ±3 digits**
Current
(via optional clamp meter)	±5.0% ±3 digits
Range	0.1 mA to 200 A ac
Resolution	0.1 mA
MV sensor input
(MFT1721 and MFT1731) Including temperature (third party module)	±1.0% ±2 digits
Range	0.0 mV to ±199.9 mV dc
Resolution	0.1 mV
Data storage - (MFT1731)
Capacity:	1000 results
Bluetooth communication	MFT1731
Weight (instrument and case)	1 kg (with batteries, excluding case)
IP Rating	IP54

Add Certificate Of Calibration?

Please Choose Your Free Gift

Qty

Description

This instrument comes complete with your choice of free gift from the drop-down menu above.
Choose from a calibration voucher for next year or a 50m R2 wander lead. How about any one of the IET Guidance Notes, or a quality two-pole tester?
Whatever you choose you can be sure you're getting a fantastic deal at Instrument Sales & Service.

Megger MFT1721: The new advanced level, 18th Edition Multifunction Tester

The new MFT1700 series has been designed for tough environments and ultimate reliability. Features include a rubber over mould for extra protection and grip, IP54 protection against dust and water and an EN61010 Cat IV safety rating. Its class leading input protection ensures the MFT can withstand accidental misuse and voltage transients when other testers can’t. All this in an intuitive and easy to use instrument with no hidden menus or complicated screens.

*Important Calibration Information:

This instrument comes complete with a manufacturers calibration certificate. Please be aware that these certificates are generic and may also be time lapsed. If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

The Megger MFT1700 Series Comes Supplied With:

Printed quick start guide
Full user guide on CD
Manufacturer's Calibration Certificate
Switched Probe SP5 (not supplied with MFT1711)
Neck strap - Megger embroidered
3 Wire lead set with prods and clips
Mains plug test lead (BS1363 (LT300-EN-BS)
AC battery charger (MFT1731 only)

The MFT1700 series is a range of 3 instruments for testing low voltage electrical installations to BS7671. They provide all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations, including:

System voltage and frequency measurement TRMS
Insulation test at 100 V*, 250 V, 500 V and 1000 V Including input protection against live circuits up to 600 V even when insulation test is locked-on
Continuity resistance at 200 mA or 15 mA
Automatic start - no need to press TEST so leaving both hands free to hold probes
Resistance range up to 100 kΩ with fast continuity buzzer at selectable thresholds
Earth loop test
2 and 3 wire non-trip range
2 wire Hi current including phase to phase
Prospective fault current measurement up to 20 kA
RCD testing including: Type AC, A, S, B* and programmable RCDs, 3-phase RCDs*, Auto-test routine, Fault (Touch) voltage display
Earth spike testing: 2-pole/3-pole, ART, Stakeless techniques

Tests are easily selected using the colour coded rotary switches with results clearly displayed on the high contrast, dual measurement, backlit display. Included with the instrument: standard 3-wire leadset and a mains test lead, a switched probe for fast and easy testing*, a full 12-month calibration certificate and warranty upgradeable to 3 years. The MFT1711 and MFT1721 are supplied in a robust moulded case, and the MFT1731 is supplied in a large soft pouch with plenty of additional space for optional extras like a few tools and the earth electrode test kit, comprising 2 spikes and 3 long test leads.

Megger MFT1700 Series Selection Chart

* Model Dependent** Requires optional Accessory

Descriptions and Features	MFT1711	MFT1721	MFT1731
Insulation ranges
100 V		X	X
250 V, 500 V	X	X	X
1000 V	X	X	X
Test voltage display	X	X	X
Adjustable buzzer threshold		X	X
Continuity and resistance ranges
200 mA test	X	X	X
15 mA test		X	X
Adjustable buzzer threshold	X	X	X
Loop Testing
2 and 3 wire non-tripping L-PE 50 V – 280 V	X	X	X
2 wire Hi current L-N 50 V – 280 V	X	X	X
2 wire phase to phase L-L 50 V – 500 V		X	X
PSCC and PFC (20 kA max)	X	X	X
Max. Zs display	X	X	X
R1 + R2 value		X
Touch voltage display on faulty earth	X	X	X
Earth electrode test
2 and 3 pole **			X
3 pole ART and Stakeless method **			X
RCD tests
½, 1, 5 x I and ramp RCD test	X	X	X
Auto RCD test	X	X	X
Type AC, A and S RCDs	X	X	X
Type B (pure DC) RCDs		X	X
Programmable RCD	X	X	X
3-phase RCD (no earth)		X	X
30, 100, 300 and 500 mA RCD	X	X	X
10 mA and 100 mA RCD	10 mA	X	X
Other Features
Supply measurement	X	X	X
True RMS	X	X	X
Leakage current measurement **		X	X
Phase rotation		X	X
Calibration Certificate	X	X	X
Rechargeable batteries (charger included)			X
SP5 Switched probe included		X	X
Warranty upgradeable to 3 years FREE	X	X	X
On board memory with Bluetooth download			X
CAT IV 300 V / CAT III 600 V	X	X	X
Hard moulded case	X	X
Soft pouch with additional storage			X

isswww and Megger

The extensive Megger product portfolio provides electrical test equipment for an exceptionally wide range of applications at any point of the electricity network. From small handheld low voltage equipment such as multifunction installation testers through to high voltage asset test equipment like insulation resistance testers, circuit breaker analysers, protection relay test systems to transformer condition measurement devices.

Megger designs and manufactures portable electrical test equipment in factories located in Germany, Sweden, the UK, and USA. Megger products help you install, improve efficiency, reduce cost and extend the life of you or your customers’ electrical assets.

Established in the late 1800s, the company has been designing and making test and measurement instruments that perform electrical measurements for preventative maintenance, troubleshooting and commissioning for decades. Megger products have supported customers all over the world to improve their facilities’ efficiency, reduce costs, extend the life of apparatus and through trending and analysis, anticipate equipment failure and future performance.
Being a brand synonymous with the industry and a cornerstone pioneer of many of today’s everyday items of test equipment, ISSWWW are proud to bring you Megger’s full range of equipment and services, now and into the future.

Features & Specification

More Information

Key Features

Manufacturers Calibration Certificate, Phase Rotation Service, Auto RCD, 2 Wire Loop test, Backlit LCD Display, Non Trip Loop Testing

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Megger

Short Description

Insulation Test
Output voltage	-0% +20% at rated load or less
Voltage display	±3% ±3 digits ±0.5% of rated voltage
Short circuit current	1.5 mA nominal test current
Test current on load	1 mA at min pass values of insulation
Insulation accuracy
1000 Volts	10 kΩ ~ 999 MΩ ±3% ±2 digits
500 Volts	~ 500 MΩ ±3% ±2 digits >500 MΩ ±10% ±4 digits
250 Volts	10 kΩ ~ 250 MΩ ±3% ±2 digits >250 MΩ ±10% ±4 digits
100 Volts	10 kΩ ~ 100 MΩ ±3% ±2 digits >100 MΩ ±10% ±4 digits
Resistance and continuity
0.01 Ω ~ 99.9 Ω	±2% ±2 digits
100 Ω ~ 99.9 kΩ	±5% ±2 digits
Open circuit voltage	5 V ±1 V
Test current	(0 Ω ~ 2 Ω) 205 mA ±5 mA 15 mA ±5 mA (user selectable)
Loop test
Live to earth/neutral supply	48 V ~ 280 V (45 Hz ~ 65 Hz)
Live to live supply (not MFT1711)	48 V ~ 500 V†† (45 Hz ~ 65 Hz)
L-N/L-L tests	±5% ±5 digits
L-E tests †
0.1 Ω ~ 39.9 Ω	±5% ±5 digits ± noise margin
40.0 Ω ~ 1000 Ω	±10% ±5 digits
Display range	0.01 Ω ~ 1000 Ω
Live to earth PFC range	20 kA
Live to live PSCC range	20 kA
RCD tests
Supply up to 100 mA	48 V ~ 480 V** (45 Hz ~ 65 Hz)
Supply up to 1 A	48 V ~ 280 V
RCD type	Type AC, A, S Type B (pure dc)
No trip test
(1/2xI)	–10% ~ –0%
Trip test
(1xI, 2xI & 5xI)	+0% ~ +10%
Ramp test - Touch voltage
(0 ~ 253 V)	+5% +15% ±0.5 V
Trip time	±1% ±1 ms
Trip current	±5%
Step increments - VAR (variable RCD selection)
10 mA ~ 50 mA	1 mA steps
50 mA ~ 500 mA	5 mA steps
500 mA ~ 1000 mA	10 mA steps
Supply measurement
Voltage	10 V ~ 600 V (15 ~ 400 Hz) True RMS ±3% ± 1 V ±2 digits
Phase rotation indication	L1–L2–L3 & L1–L3–L2
Frequency	15 Hz ~ 99 Hz ±0.5% ±1 digit 100 Hz ~ 400 Hz ±2.0% ±2 digits
Frequency resolution	0.1 Hz
Power supply
MFT1711 and MFT1721:	IEC LR6 type AA alkaline (6 cells - supplied)
MFT1731:	1.2 V NiMH (rechargeable pack of 6 – supplied)
Mains charger for on-board re-charging (4 hours typical) 12 V car charger (cigar lighter lead - optional)
Earth / ground test
Resolution	0.01 Ω
Current	0.45 mA or 4.5 mA
Noise rejection	20 V pk/pk (7 V rms)
Max probe resistances Rp & Rc	100 kΩ @ 50 V 5 kΩ @ 25 V
2 & 3 pole method	(0.01 Ω ~ 1.999 kΩ) ±2.0% ±3 digits ART method (1.00 Ω ~ 1.999 kΩ) ±5.0% ±3 digits**
Stakeless method (1.00 Ω ~ 199 Ω)	±7.0% ±3 digits**
Current
(via optional clamp meter)	±5.0% ±3 digits
Range	0.1 mA to 200 A ac
Resolution	0.1 mA
MV sensor input
(MFT1721 and MFT1731) Including temperature (third party module)	±1.0% ±2 digits
Range	0.0 mV to ±199.9 mV dc
Resolution	0.1 mV
Data storage - (MFT1731)
Capacity:	1000 results
Bluetooth communication	MFT1731
Weight (instrument and case)	1 kg (with batteries, excluding case)
IP Rating	IP54

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA