Megger DLRO10X 10A Downloadable Low Resistance Ohmmeter

£4,558.80

Megger DLRO10/DLRO10X Technical Specification
	DLRO 10	DLRO 10X
Measurement
Mode	Manual, Auto, Continuous, Inductive	Manual, Auto, Continuous, Inductive, Undirectional
Control	Fully Automatic	Fully Automatic/Manual
Speed	<3s for forward & reverse current and to display average
Display
Measurement	4 1/2 digit seven segment LED
Range and Safety	LED indication	Large backlit LCD
Test Method	Single cycle reversing d.c. ratiometric measurement -average result display
Test Current
Accuracy	±10%
Stability	<10 ppm per second
Maximum Lead Resistance	100 mΩ total for 10 A operation irrespective of battery condition.
Voltmeter Input Impedance	> 200 kΩ
Hum Rejection	Less than 1% ±20 digits additional error with 100 mV peak 50/60 Hz. on the potential leads. Warning will show if hum or noise exceeds this level.
Data Transfer	-	Real Time or from storage via RS232
Storage	-	700 tests
Memo Field	-	Up to 200 characters per test via integral alphanumeric keypad
Battery Capacity	7 Ah NiMH rechargeable
Battery Life	Typical 1000 x 10A Tests Before Recharge
Recharge	Via external 90 V - 260 V 50/60 Hz charger or from 12 to 15 V dc supply
Standard Charging Rate	2.5 hours to 90% capacity, 4 hrs for full charge
Temperature	+5 ºC to +45 ºC (41 ºF to 113 ºF) at full specification -10 ºC to +50 ºC (14 ºF to 122 ºF) at reduced accuracy
Storage Co-Efficient	-30 ºC to +70 ºC (-22 ºF to 158 ºF)
Slow Charging	<0.01% per ºC over range 5 ºC to 40 ºC (<0.006% per ºF from 4 1ºF to 104 ºF)
Humidity (MAX)	+10 ºC to +45 ºC (50 ºF to 113 ºF)
Altitude (MAX)	90% RH @ 40 ºC (104 ºF) non-condensing
Safety	2000 m (6562 ft) to full safety specifications
EMC	In accordance with IEC61010-1 600 V Category III - only when DH6 leads are used. In accordance with IEC61326-1
Dimensions	220 x 100 x 237 mm (8.6 x 4 x 9.5 in)
Weight	2.6 kg (5 3/4 lb.) including battery module

Description

Megger DLRO10X 10A Low Resistance Ohmmeter (Downloadable) Complete with Test Leads

The DUCTER DLRO10X bring new standards to low resistance measurement. Both are fully automatic instruments, selecting the most suitable test current, up to 10 A dc to measure resistance from 0.1 µΩ to 2000 Ω on one of seven ranges. For users who desire more control over the measurement process, DLRO 10X uses a menu system controlled by a two-axis paddle to allow manual selection of the test current. DLRO10X also adds real-time download of results and on-board storage for later download to a PC.

Both instruments are built into a strong, lightweight case that is equally at home in the field or in the laboratory. Light enough to be worn around the neck, they are small enough to be taken into areas which were previously too small to access. DLRO 10 uses a large, bright 4-1/2-digit LED display while DLRO 10X has a large, backlit LCD display.

key Features:

• Accurate results in under three seconds
• Auto current reversal cancels standing emfs
• Fuse protected to 600 V
• NiMH battery reduces weight
• 250 mW power limit (with optional override) to avoid heating the test sample
• Automatically detects continuity in potential and current connections
• Visible warning of high voltages present at the terminals
• Visible warning of current flowing in the test sample
• Multiple operating modes including fully automatic
• Alpha-numeric keypad for entering test notes
• User setable high and low limits
• Autoranging with Manual option
• Printer output and memory
• Downloadable Results

Resistance Ranges			Full Scale Volts		Test Current
Full Scale	Resolution	Accuracy*	Resistive	Inductive	Resistive	Inductive
1.9999 mΩ	0.1 μΩ	±0.2% ±0.2μΩ	20 mV	n/a	10 A	n/a
19.999 mΩ	1 μΩ	±0.2% ±2 μΩ	20 mV	20 mV	1A	1A
199.99 mΩ	10 μΩ	±0.2% ±20 μΩ	20 mV	200 mV	100mA	1A
1.9999 Ω	100μΩ	±0.2% ±0.2 mΩ	20 mV	200 mV	10mA	100mA
19.999 Ω	1 mΩ	±0.2% ±2 mΩ	20 mV	200 mV	1mA	10mA
199.99 Ω	10 mΩ	±0.2% ±20 mΩ	20 mV	200 mV	100 μA	1mA
1999.9 Ω	100 mΩ	±0.2% ±0.2 Ω	200 mV	200 mV	100 μA	100 μA

Features & Specification

More Information

Key Features

Multiple operating modes, Quick, accurate results, 0.1 µΩ to 2000 Ω, Storage and download functions, Small and weighs less than 15 kg

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Megger

Short Description

Megger DLRO10/DLRO10X Technical Specification
	DLRO 10	DLRO 10X
Measurement
Mode	Manual, Auto, Continuous, Inductive	Manual, Auto, Continuous, Inductive, Undirectional
Control	Fully Automatic	Fully Automatic/Manual
Speed	<3s for forward & reverse current and to display average
Display
Measurement	4 1/2 digit seven segment LED
Range and Safety	LED indication	Large backlit LCD
Test Method	Single cycle reversing d.c. ratiometric measurement -average result display
Test Current
Accuracy	±10%
Stability	<10 ppm per second
Maximum Lead Resistance	100 mΩ total for 10 A operation irrespective of battery condition.
Voltmeter Input Impedance	> 200 kΩ
Hum Rejection	Less than 1% ±20 digits additional error with 100 mV peak 50/60 Hz. on the potential leads. Warning will show if hum or noise exceeds this level.
Data Transfer	-	Real Time or from storage via RS232
Storage	-	700 tests
Memo Field	-	Up to 200 characters per test via integral alphanumeric keypad
Battery Capacity	7 Ah NiMH rechargeable
Battery Life	Typical 1000 x 10A Tests Before Recharge
Recharge	Via external 90 V - 260 V 50/60 Hz charger or from 12 to 15 V dc supply
Standard Charging Rate	2.5 hours to 90% capacity, 4 hrs for full charge
Temperature	+5 ºC to +45 ºC (41 ºF to 113 ºF) at full specification -10 ºC to +50 ºC (14 ºF to 122 ºF) at reduced accuracy
Storage Co-Efficient	-30 ºC to +70 ºC (-22 ºF to 158 ºF)
Slow Charging	<0.01% per ºC over range 5 ºC to 40 ºC (<0.006% per ºF from 4 1ºF to 104 ºF)
Humidity (MAX)	+10 ºC to +45 ºC (50 ºF to 113 ºF)
Altitude (MAX)	90% RH @ 40 ºC (104 ºF) non-condensing
Safety	2000 m (6562 ft) to full safety specifications
EMC	In accordance with IEC61010-1 600 V Category III - only when DH6 leads are used. In accordance with IEC61326-1
Dimensions	220 x 100 x 237 mm (8.6 x 4 x 9.5 in)
Weight	2.6 kg (5 3/4 lb.) including battery module

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA