Martindale VIPD150-S Voltage Indicator and Proving Unit

£233.99

Be the first to review this product

Martindale VI-15000 Voltage Indicator

Nominal Voltage Range: 50 - 1000V AC / DC
Nominal Voltage Threshold Indications: 50, 100, 200, 400, 690 V DC/AC rms
Nominal Voltage threshold tolerance: conforms to BS EN61243-3:2010
Polarity indication: from approx 12V DC/AC rms
AC/DC voltage detection: automatic
Range detection: automatic
Response time: < 0.1s
Frequency range: DC, 1 - 400 Hz
Test current: < 3.5mA at 1000V DC/AC rms
Duty ratio: 30s ON (operated) / 240s OFF (recovery)

Environmental

Temperature & Humidity (operating & storage): -10°C to 55°C ≤ 85% R.H.
Altitude: up to 2000m Pollution degree 2
IP rating: IP54 /li>

General

Power: from circuit under test
Dimensions: 205(L) x 67(W) x 27(D) mm
Weight: 130g approx.
Includes: instructions

Safety

Conforms to BS EN 61243-3:2010 CAT IV 1000V
Class II, Double Insulation
Pollution Degree: 2
EMC: Conforms to BS EN 61326-1

Description

Martindale VIPD150-S Voltage Indicator and Proving Device Kit

Nothing is more dangerous than trusting a defective voltage indicator to test for a dead circuit. Safe electrical work requires the use of a voltage indicator that has been proved with a proving device before and after use.

The Martindale VIPD150 contains the VI-15000 voltage indicator and the PD690 proving device, enabling you to comply with health and safety recommendations for safe working.

The new VI15000 has a 1000V CATIV safety rating and LED indication for AC/DC voltages from 50V to 690V and above, ensuring compliance with health and safety recommendations for safe working in all BS EN61010 installation categories. It’s the simplest and most reliable way to ensure circuits have been de-energised and properly isolated prior to maintenance and modifications. Based on the industry endorsed VI3800, the new CATIV design not only provides improved protection against voltage transients, but also includes a high wattage resistor that will limit the current in the event of damage to the cable in accordance with BS EN61243-3. The protection is built in where it’s needed, in the handheld probe assembly rather than just in the instrument providing superior protection for the user to other testers.

The heavy duty, double insulated cable, large finger guard and a retractable, lockable prod sheath make this the safest, most durable and reliable instrument of its type.

The PD690 proving device produces 700V AC/DC to enable voltage indicators and other devices with ranges up to 700V to be checked. It is a portable, battery powered proving unit with the option of being driven from a 12V supply via a car or mains power supply. The kit is supplied with a combination carry case for both VI and PD products.

A CLoser Look at the Contents:

Martindale VI15000 Voltage Indicator

The new VI-15000 extends Martindale’s range of industry standard voltage indicators into higher voltage applications.

The new VI-15000 has a 1000V CATIV safety rating and LED indication for AC/DC voltages from 50V to 690V and above, ensuring compliance with health and safety recommendations for safe working in all BS EN61010 installation categories. It’s the simplest and most reliable way to ensure circuits have been de-energised and properly isolated prior to maintenance and modifications.

Based on the industry endorsed VI3800, the new CATIV design not only provides improved protection against voltage transients, but also includes a high wattage resistor that will limit the current in the event of damage to the cable in accordance with BS EN61243-3. The protection is built in where it’s needed, in the handheld probe assembly rather than just in the instrument providing superior protection for the user to other testers.

Fully compliant with HSE GS38 regulations, the VI-15000 comes complete with heavy duty two layer double insulated leads with a contrasting inner sheath to easily highlight cable damage. The tester features bright LEDs to clearly identify the voltage present in five levels with thresholds of up to 690V. The indicator, which requires no batteries, will identify both AC and DC sources and show polarity.

The heavy duty, double insulated cable, large finger guard and a retractable, lockable prod sheath make this the safest, most durable and reliable instrument of its type.

Designed in Martindale’s distinctive yellow casing with a clear blue label, to make it easily distinguishable from the existing lower voltage VI13800, the new VI-15000 is available to purchase on its own or as part of a kit containing everything you need for on-site working. Kits includes a high voltage Martindale proving unit, combination carry case and locking off devices, enabling full compliance with health and safety recommendations for safe working which require voltage indicators to be proved before and after use and the point of isolation to be locked off with a caution notice.

Martindale PD690 Proving Device

The Martindale PD690 is a 700V AC proving device, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations. Using a voltage indicator without first proving it is working correctly could prove fatal.

This device is designed for indicators with 230V and 415/440V AC detection ranges, such as the Martindale VI13800. The proving unit is one of the few designs to check indicators with ranges above 250V.

The PD690 can also check Drummond and other filament test lamps as its output is sufficient to illuminate the bulb. This model is not designed for use with multimeters.

There is now a facility to power the PD690 proving devices with the addition of a 12V DC power connection point. The units can be powered by either alkaline batteries or a 12V power supply. There are two power supply units available for the proving devices, the PSUPD230 and the PSUHPAT12. The PSUPD230 can be connected to mains power and the PSUHPAT12 is a 12v power supply suitable for use in a car/van cigarette lighter.

Features & Specification

More Information
Key Features	GS38 Compliant, Tests Up To 1000v, LED Indicator, Non-Fused, Case Included, 690V Proving Unit
Product Stock Status	Next Day Delivery (subject to availability)
Manufacturer	Martindale
Short Description	Martindale VI-15000 Voltage Indicator Nominal Voltage Range: 50 - 1000V AC / DC Nominal Voltage Threshold Indications: 50, 100, 200, 400, 690 V DC/AC rms Nominal Voltage threshold tolerance: conforms to BS EN61243-3:2010 Polarity indication: from approx 12V DC/AC rms AC/DC voltage detection: automatic Range detection: automatic Response time: < 0.1s Frequency range: DC, 1 - 400 Hz Test current: < 3.5mA at 1000V DC/AC rms Duty ratio: 30s ON (operated) / 240s OFF (recovery) Environmental Temperature & Humidity (operating & storage): -10°C to 55°C ≤ 85% R.H. Altitude: up to 2000m Pollution degree 2 IP rating: IP54 /li> General Power: from circuit under test Dimensions: 205(L) x 67(W) x 27(D) mm Weight: 130g approx. Includes: instructions Safety Conforms to BS EN 61243-3:2010 CAT IV 1000V Class II, Double Insulation Pollution Degree: 2 EMC: Conforms to BS EN 61326-1

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA