Martindale SMKIT5 Smart Meter Installation Kit
Martindale SMKIT5 Smart Meter Installation Kit
VT7
| Electrical | |
| Voltage Range | 50V - 600AC rms |
| Frequency Range | 50 - 60 Hz |
| Test Range | <5μA |
| Enviromental | |
| Temperature (Operating & Storage) | -10°C to 55°C |
| Humidity (Operating & Storage) | ≤ 85% R.H. |
| Altitude | up to 2000m |
| General | |
| Power | 9V, PP3 alkaline battery included (IEC 6LR61, NEDA 1604A) |
| Current Consumption | 34mA max |
| Dimensions | 236(L) x 44(W) x 33(D) mm |
| Weight | 120g (battery included) approx |
| Safety | |
| Conforms To | BS EN61010-1 CAT IV 300V, CAT III 600V |
| Pollution Degree | 2 |
| IP Rating | IP54 |
Drummond MTL10
| Maximum Working Voltage | 500V AC, 750V DC |
| Voltage Ranges | 50, 100, 200, 400V AC/DC |
| Range Detection | Automatically |
| Response Time | <0.1s |
| Frequency Range | DC, 0-65Hz |
| Test Current (500V AC/DC) | <3.5mA |
| Temperature Range | -10C to 55C |
| Humidity | max 85% rel.H |
| Measurement Category | CAT IV 600V, CAT III 1000V |
| Pollution Degree | 2 |
| Protection Degree | IP67 |
| Dimensions | 213 x 112 x 72mm |
| Weight | 320g |
Martindale PD440
| Output Voltage | 440V nominal |
| Operating Temperature | -10°C to +40°C at max 70% RH |
| Battery | 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent |
| Dimensions | 143 x 84 x 50mm |
| Weight | 400g approx including battery |
Martindale TEK101
| Voltage Range | 100-600V |
| Frequency Range | 50Hz to 50kHz |
| Visual Indication | Red LED |
| Audible Indication | 2kHz tone |
| Battery low | Green LED |
| Operating temperature | 0°C to 40°C |
| Supply | 9V alkaline battery, MN1604 or equivalent (excluded) |
| Housing | Flame retardant ABS |
| Dimensions | 202 X 32 X 22mm |
| Weight | 140g approx (excluding battery) |
Description
Martindale SMKIT5 Smart Meter Installation Kit
The complete solution to enable safe working practices during the installation of Smart Meters. The SMKITs contain all the test tools needed to ensure safe isolation procedures can be implemented during the installation process
The Martindale SMKIT5 Smart Meter Installation Kit has everything an electrician might need to safely isolate a circuit whilst installing a smart meter. Components include a non-contact voltage indicator, a single-pole voltage tester, a test lamp, a proving unit and a handy carry case for all the constituent parts of the kit.
The Martindale TEK101 is a handy non-contact voltage detector that can sense voltage between 180V to 600V AC with a unique integrated 50Hz proving unit which tests the sensor operation, battery and LEDs. When voltage is detected, a red LED illuminates and the detector emits a buzzer sound.
The single-pole Martindale VT7 is a contact voltage detector that indicates voltage between 50V and 600V with a bright red LED and an audible buzzer sound. It is perfect for using when wearing protective gloves and gauntlets so the user can always detect live panel casings with ease.
In order to test safe isolation on the supply side (Cat IV), a Drummond MTL10 test lamp is also provided. With a 360˚ LED display, the test lamp always shows if AC/DC voltage is present from 50V to 500V. A Martindale PD440 proving unit allows the user to verify the test lamp before and after use.
Finally, a combination soft carry case is provided for all the testers. A flap allows the proving unit to be used whilst remaining in the case.
The SMKIT5 Includes:
- 1 x TEK101 – Non-contact voltage indicator with built in proving device
- 1 x VT7 – Single Pole Contact Voltage Tester suitable for use when wearing PPE
- 1 x MTL10 – Drummond AC/DC Test Lamp 600V CAT IV
- 1 x PD440 – Proving Device
- 1 x TC70 – Combination soft carry case
ISSWWW and Martindale Electric
Founded in 1928 and also owns Edgcumbe Instruments Metrohm® products, as well as the John
Drummond Engineers range of test lamps. They are a British owned company, based in Watford, just 5 minutes from junction 5 of the M1. Their product range helps electricians and maintenance engineers carry out portable appliance testing, check fixed wiring for 17th Edition and Part P testing, safely prove dead, and measure everything from light and sound levels to microwave leakage and power consumption.
We are proud to be able to offer Martindale's products and services and have done so for many years.
Features & Specification
| Key Features | 600V ACDC Test Lamp, Case Included, Non-Contact Proving Unit, 5 Piece Kit, Great Value For Money | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | Martindale | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description | Martindale SMKIT5 Smart Meter Installation KitVT7
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Maximum Working Voltage | 500V AC, 750V DC |
| Voltage Ranges | 50, 100, 200, 400V AC/DC |
| Range Detection | Automatically |
| Response Time | <0.1s |
| Frequency Range | DC, 0-65Hz |
| Test Current (500V AC/DC) | <3.5mA |
| Temperature Range | -10C to 55C |
| Humidity | max 85% rel.H |
| Measurement Category | CAT IV 600V, CAT III 1000V |
| Pollution Degree | 2 |
| Protection Degree | IP67 |
| Dimensions | 213 x 112 x 72mm |
| Weight | 320g |
Martindale PD440
| Output Voltage | 440V nominal |
| Operating Temperature | -10°C to +40°C at max 70% RH |
| Battery | 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent |
| Dimensions | 143 x 84 x 50mm |
| Weight | 400g approx including battery |
Martindale TEK101
| Voltage Range | 100-600V |
| Frequency Range | 50Hz to 50kHz |
| Visual Indication | Red LED |
| Audible Indication | 2kHz tone |
| Battery low | Green LED |
| Operating temperature | 0°C to 40°C |
| Supply | 9V alkaline battery, MN1604 or equivalent (excluded) |
| Housing | Flame retardant ABS |
| Dimensions | 202 X 32 X 22mm |
| Weight | 140g approx (excluding battery) |
Delivery
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA