Toggle Nav
Search

Kewtech KT1795 Two Pole Voltage and Continuity Tester

£82.74
Be the first to review this product

Kewtech KT1795 Technical Specification
LED nominal Voltage 12/24/50/120/230/400/690/ 1000V, AC
(40…400Hz), DC(±)
LED tolerances EN 61243-3
ELV indication LED >50V AC, >120V DC
Response time <1s at 100% of each nominal value
LCD Range 6…1000VAC, 1500VDC(±)
LCD Resolution 1V
LCD Accuracy ±3%±3dgt (6…1000Vac/1500Vdc)
LCD Overrange indication "OL” 
Peak current with push buttons, not pressed Is <3.5mA (at 1000V)
Peak current with push buttons pressed Is <300 measurement
Measurement Duty 30s ON, 240s OFF
Single Pole Phase Test
Voltage Range 100…1000V AC (50/60Hz )
Phase Rotation Test
System 170…1000V phase-to-phase,
AC 50/60Hz
Continuity Test
Continuity test range 0…500 kohm + 50%
Resistance measurement 0-1999ohm ±(5% + 10dgt);
Resolution: 1ohm
General
Temperature -5…40°C operation;
-20…70°C storage;
No condensation
Humidity max. 85% RH
Altitude up to 2000m
Overvoltage CAT. III 1000V/ CAT. IV 600V
Standard EN/IEC 61243-3:2014
Pollution Degree 2
Protection IP64
Battery 3V (IEC LR03 1.5V x 2)
Internal battery consumption approx. 80mA

 

|

Description

Kewtech KT1795 Two Pole Voltage and Continuity Tester

Two pole voltage and continuity tester with LCD readout and ghost voltage clearance feature.

OVERVIEW:

The new KT1795 two-pole voltage and continuity tester is an essential tool in every electrician's toolbox used for voltage indication and the safe isolation of live circuits. The KT1795 will indicate voltage is present even with no batteries or if the batteries go flat so you can have peace of mind of indication when working with live circuits.

The KT1795 has bright LEDs to show the voltage steps and features an LCD display that provides you with an exact voltage readout to a 1V resolution.

KEY BENEFITS:

  • Required for correct safe isolation procedure
  • Ghost voltage clearance function
  • Permanent UK Specific GS38 Slender probe tips NO NEED to swap ends
  • Fits into recessed terminals such as RCBOs without unscrewing any caps
  • IP64
  • Designed to the new international safety standards IEC 61243-3 & IEC 61010-1
  • Cat IV 600V, Cat III 1000V

KEY FEATURES:

  • AC voltage range 6V - 1000V
  • DC voltage range 6V - 1500V
  • Single pole voltage detection on both probes
  • Phase rotation - Bright green LEDs show left or right rotation
  • Push buttons to increase the testing load to clear ghost voltages
  • 1V LCD resolution display
  • Bright LEDs indicate the voltage level
  • Clear audible tone
  • Bright torch light - gives ample illumination
  • Continuity Test
  • Diode test
  • Self-diagnostic test
  • Polarity indication
  • Auto power on/off
  • Data hold

    isswww and Kewtech 

    One of our longest-standing manufacturer partnerships and a brand that sells well day in and day out for solid dependability and innovation at the price point. 

    Kewtech manufacture innovative, accurate and reliable test equipment that enables UK electrical contractors to undertake their testing obligations quickly and efficiently.  

    A product with the “Kewtech” brand has been specifically designed for the UK market by a team with many years of industry experience. We pride ourselves on developing and manufacturing products that have real benefits to the industry. 

    Kewtech has consistently introduced industry firsts, like our Lightmate testing adaptors, the Pat Adaptor, the MFT with PAT testing plus download, and our award-winning RB1 Replacement Lamp. Our 18th Edition multifunction testers lead the way in ease of use, loop accuracy, and repeatability of reading. 

Features & Specification

More Information
Key Features Phase rotation, Voltage 1000V AC & 1500V DC, Ghost voltage clearance function, Clear LED indication & LCD readout
Product Stock Status Next Day Delivery (subject to availability)
Manufacturer Kewtech
Short Description

Kewtech KT1795 Technical Specification
LED nominal Voltage 12/24/50/120/230/400/690/ 1000V, AC
(40…400Hz), DC(±)
LED tolerances EN 61243-3
ELV indication LED >50V AC, >120V DC
Response time <1s at 100% of each nominal value
LCD Range 6…1000VAC, 1500VDC(±)
LCD Resolution 1V
LCD Accuracy ±3%±3dgt (6…1000Vac/1500Vdc)
LCD Overrange indication "OL” 
Peak current with push buttons, not pressed Is <3.5mA (at 1000V)
Peak current with push buttons pressed Is <300 measurement
Measurement Duty 30s ON, 240s OFF
Single Pole Phase Test
Voltage Range 100…1000V AC (50/60Hz )
Phase Rotation Test
System 170…1000V phase-to-phase,
AC 50/60Hz
Continuity Test
Continuity test range 0…500 kohm + 50%
Resistance measurement 0-1999ohm ±(5% + 10dgt);
Resolution: 1ohm
General
Temperature -5…40°C operation;
-20…70°C storage;
No condensation
Humidity max. 85% RH
Altitude up to 2000m
Overvoltage CAT. III 1000V/ CAT. IV 600V
Standard EN/IEC 61243-3:2014
Pollution Degree 2
Protection IP64
Battery 3V (IEC LR03 1.5V x 2)
Internal battery consumption approx. 80mA

 

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration 

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT £4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays)  – UK Mainland only - Zones A & B  - ANY order value - Order by 2:00pm £7.75
Saturday ANYTIME Delivery - Order by 2:00pm £9.95
 

 

 

 

 

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

  • Zones A & B  - Mainland delivery rates apply. 
  • Zone C - Scottish Highlands (Charges are calculated at the checkout).
  • Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
  • Zone E - Northern Ireland (Charges are calculated at the checkout).
  • Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA