TREND Networks R153001 NaviTek NT Network Tester

£810.00

TREND NaviTEK NT Pro
Connectors
Test Ports
RJ45
Used for
- Cable Test
- Ethernet Test
Connector type
Lifejack with user-replaceable contacts
Optical
Used for
Ethernet Test
Connector type
SFP socket
System Ports
USB
Used for
- Software Update
- Results transfer
- 802.1x certificate transfer
- Import/export of config
- WiFi Adapter
Class
Host
Connector type
A
USB type
1.1
Power
Used for
Battery charging
Mains powering via adaptor
Connector type
2.5mm pin power jack
Polarity
Centre pin positive
Voltage
12v
Current
2 A
Location
Bottom of optional power module
(Not present in standard alkaline battery pack)
Controls
ON/OFF
Push button
Used for
Power ON/OFF
Function Keys
F1 to F3
Used for
Screen-defined functions
Navigation Keys
Cursor and ENTER
Used for
User interface navigation
Escape
Used for
Return to previous menu
Autotest
Used for
Launch of automatic test function
Reset
Push button
Used for
Escape from exceptional lockup condition
Displays
Screen
LCD
Used for
Display of setup functions and results
Location
Front
Size
2.8 inch diagonal
Type
QVGA Colour
Pixels
240 x 320
LEDs
Charger LED
Used for
Indication of charging status
Colour
Green
Location
Bottom of standard power module
(Not present in optional alkaline battery pack)
RJ45 Link LED
Use
ON indicates link UP
Colour
Green
RJ45 Activity LED
Use
Flashing indicates link activity
Colour
Green
Optical Link LED
Use
ON indicates Optical link UP
Colour
Green
Optical Activity LED
Use
Flashing indicates Optical link activity
Colour
Green
Ports
RJ45
Setup
Auto Negotiation
Enabled
Disabled
Speed
10Mb/s
100Mb/s
1Gbps
Mode
Full Duplex
Half Duplex
MDI
AUTO
MDI
MDIX
Min Rx Size
19:99 bytes
MAC
Factory set
VLAN
Enabled / Disabled
VLAN ID – 0 to 4094
VLAN Priority – 0 to 7
802.1x
Enabled / Disabled
EAP Method
EAP-MD5
EAP-MSCHAPV2
EAP-GTC
EAP-TLS
EAP-PEAP/MD5
EAP-PEAP/MSCHAPV2
EAP-PEAP/GTC
EAP-PEAP/TLS
EAP-TTLS/MD5
EAP-TTLS/MSCHAPV2
EAP-TTL/GTC
EAP-TTLS/TLS
Username
Password
Certificate
Import password
Root/CA certificate
Results
Link pulse polarity
Normal or Inverted
Link pulse height
Normal or Low
Tests
Ethernet Mode
Ping4
Ping6
Trace Route4
Trace Route6
Hub Blink
Netscan
Loopback
Auto (Ping DNS/Gateway/Internet, Trace Route,
Netscan)
Cable Mode
Wiremap
Tone Generator
Auto (Wiremap)
Service Detection
Detected Services
PoE (802.3af/at. Not Cisco pre-standard)
ISDN S
PBX
Unknown
Optical
Supported SFPs
The following SFP types are supported. Use of other types of SFP is
possible but correct operation is not guaranteed.
SFP Type SX
Manufacturer Part #
Avago AFBR-5705Z / Apac LM28-C3S-TI-N-DD
Speed
1Gbps
Fibre Type
Multimode
Wavelength
850nm
Connector Type
LC Duplex
Optical
SFP Type LX
Manufacturer Part #
Avago AFCT-5705Z
Speed
1Gbps
Fibre Type
Singlemode
Wavelength
1310nm
Connector Type
LC Duplex
SFP Type ZX
Manufacturer Part #
Apac LS48-C3U-TC-N-DD
Speed
1Gbps
Fibre Type
Singlemode
Wavelength
1550nm
Connector Type
LC Duplex
Setup
Speed
1Gb/s
Min Rx Size
19:99
MAC
Factory set
VLAN
Enabled / Disabled
VLAN ID – 0 to 4094
VLAN Priority – 0 to 7
802.1x
Enabled / Disabled
EAP Method
EAP-MD5
EAP-MSCHAPV2
EAP-GTC
EAP-TLS
EAP-PEAP/MD5
EAP-PEAP/MSCHAPV2
EAP-PEAP/GTC
EAP-PEAP/TLS
EAP-TTLS/MD5
EAP-TTLS/MSCHAPV2
EAP-TTL/GTC
EAP-TTLS/TLS
Username
Password
Certificate
Import password
Root/CA certificate
Tests
Optical
Tx Power dBm (using a specified SFP)
Rx Power dBm (using a specified SFP)
Ethernet Mode
Ping4
Trace Route4
Hub Blink
Netscan
NET TEST (Ping, Trace Route, Netscan)
Cable Tests
Wiremap
Setup
Cable Type
2 Pair
4 Pair 568A
4 Pair 568B
Colour Scheme
 
NVP
Fixed 72%
Custom 59% - 89%
Termination Type
None
Open
Active Remote
#1 - #12
Tests (No Termination)
Faults
Open circuit by pair
Short circuit by pin
Length of pair
Metres / Feet (Set in System Setup)
Range 3-100m / 10-330ft
Tests (Active Remote Termination)
I/D – Remote #
Indications on Remote
Voltage Warning (>±10volts on any pins)
Pass/Fail
Faults
– Open circuit by pin
Short circuit by pin
Crossed pairs
Split pairs
Bridged shorts
Remote shorts
Length of pair
Metres / Feet (Set in System Setup)
Range 3-100m / 10-330ft
Tone Generator
Setup
No of Tones
3
Wire I/D
Tone applied to one of 8 pins relative to the other 7
Tone applied across one of 4 pairs
Test
Audible tone detected using compatible tone probe
Ethernet Tests
IPv4
Setup
Addressing
DHCP
Static
Numerical
Address
Netmask
Gateway
DNS1
DNS2
IPv6
Setup
IPv6 Enable
Enabled
Disabled
Addressing
Stateful (DHCPv6)
Stateless
Static
Numerical
128bit HEX IP address
Network Prefix
64 bit
128 bit
Pingv4
Setup
Target
Numerical address
URL (Store up to 10)
Count
1 to 999999
Pause
1 to 5 Sec
Length
8 to 1000 bytes.
Results
Info
READY
IN PROGRESS
PASSED
NO RESPONSE
UNKNOWN HOST
Tx Count
1 to 999999
Rx Count
1 to 999999
Delay(ms)
Minimum
Average
Maximum
Trace Routev4
Setup
Target
Numerical address
URL
Max Hops
2 to 100
Timeout
2 to 30 sec
Type
ICMP
UDP
Results
Info
READY
IN PROGRESS
PASSED
NO RESPONSE
UNKNOWN HOST
Hop
Numerical address
Delay(ms)
t1
t2
t3
Netscan
Setup
Netscan
Local
Custom
Disabled
IP Address
IPv4 address
Scan Range
0 (class C /24)
1 (class C /20)
2 (class B /16)
Results
 
List of IPv4 hosts
List of IPv6 hosts
Blink
Test
Sequence
Off/10/Off/100/Off/1000 Mb/s (RJ-45)
Off/On (Optical)
Statistics
IP
Results
IPv4
 
info: listening, assigned, DHCP failed
DHCP or Static
IPv4 Address
IPv4 Netmask
IPv4 Gateway
IPv4 DNS1
IPv4 DNS2
IPv6
 
Enabled or Disabled
info: listening, assigned, DHCP failed
Stateful (DHCPv6) or Stateless or Static
IPv6 Address
IPv6 Network Prefix, 64 bit or 128 bit
IPv6 Link Address
IPv6 DNS
Discovery
 
LLDP/CDP/EDP
Protocol
MAC address
Hostname / address
Port Name
Max 10 hosts
VLAN
Detection
1 Level VLAN ID
Rx
LINK
Results
PORT
PoE Voltage 0 – 60V
PoE Pairs 12/36 or 45/78
Speed, Duplex
MDI / MDIX
Signal Level
Polarity
PARTNER
10M-HD
10M-FD
100M-HD
100M-FD
1000M-HD
1000M-FD
LINK
Results
ERRORS
Collisions
FCS Errors
Undersize
Oversize
Jabbers
Bad Length
Traffic Utilisation
Bargraph
Direction
Rx
Format
Percentage of Link rate
Peak value
Time Interval
1 min
10 min
60 min
Storage
Configurations
Internal storage
Number of configurations – 2 (Current & Factory settings)
Export/Import
Port
USB
Format
xml
Certificates
802.1x
Max number
10
Results
Internal storage
Max Number of Jobs (Projects)
50
Max Number of result sets per Job
5000 depending on tests performed
Max total number of result sets
Up to 5000 depending on tests performed.
Export
Port
USB
Wi-Fi
Format
PDF
CSV (summary only)
System
Setup
Owner
Details
Name
Company
Address
Phone
Setup
Preferences
Language
English
French
German
Spanish
Italian
Portuguese
Chinese
Auto off
Disabled
3 mins
10 mins
30 mins
Backlight
Always On
Dims to 50% after 3 mins
Length Units
Meters
Feet
Date Format
dd/mm/yy
mm/dd/yy
Time Format
12 hour
24 hour
Software update
Upgrade
Via USB
General
Date/Time
Internal Clock
Used for
Timestamping results
Autonomy
Up to 1 day with battery removed
Power
Battery
Supported Types
Standard power module (4 x AA NiMH cells)
Alkaline battery pack with 4 AA cells
Autonomy
Up to 5 hours (power module only)
Recharge time
3 hours (Power module only)
Battery level Indication
Full
2/3
1/3
Empty
Physical
Dimensions
Length
175mm
Width
80mm
Depth
40mm
Weight
Unit
0.22kg
Batteries
0.18kg
Environmental
Temperature
Operating
0°C to 40°C
Storage
-20°C to 70°C
Relative Humidity
Min
5%
Max
90% non-condensing
Approvals
EMC
EN 55022:2006 / A1:2007
EN55024:1998 / A1:2001 / A2:2003
Safety
IEC 60950-1:2005+A1:2009/EN 60950-1:2006+A1:2010

Description

TREND Networks NaviTEK NT Range

The NaviTEK NT is a network cable tester for troubleshooting and maintenance of active and passive copper and fibre networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before.

Addressing the needs of today’s network technicians

Today, network technicians have a broad selection of software troubleshooting tools at their disposal and whilst useful in certain situations and environments they do have limitations. NaviTEK NT on the other hand offers a comprehensive suite of test and troubleshooting functionality only found on dedicated hand-held testers:-

  • Copper test interfaces
  • Fast detection of link and IP information including duplex, speed, port ID, VLAN, DNS, DHCP, Gateway status and IP address
  • Detects services such as ISDN, POTS and PoE
  • Accurate wire mapping including length measurement and distance to fault
  • Rugged, compact design permits use in confined spaces
  • Not susceptible to virus and malware attack

*Please be aware that not all features are available on all models, please see selection chart below.

The NaviTEK NT 153001 Basic Comes Supplied With:

  • 1x NaviTEK NT test unit
  • 1x Remote unit No.1
  • 4 x AA dry cell batteries (non-rechargeable)
  • 2 x Patch cables - 30cm, Cat. 5e STP
  • 1 x Quick reference guide
  • 1 x Carry case

Key Features:

Performs tests for copper cabling and networks, including:

  • Display network configuration - IPv4 / IPv6 compatible
  • Advanced wiremap for miswires, split pairs, opens and shorts
  • Distance to opens and shorts (TDR)
  • PoE/PoE+ detection
  • Tone generator for cable tracing
  • Autotest button performs Ping and Traceroute test (network mode)
  • Hub blink for port identification
  • DHCP client
  • Switch detection - 10/100/1000 Mb/s
  • User-exchangeable RJ45 inserts
  • Support for up to 12 wiremap remotes
  • Backlit colour screen

The TREND Networks family of testers:

   VDVII Basic   VDVII Plus & Pro   NaviTEK® NT   LanXPLORER Pro   SignalTEK® CT   SignalTEK® NT   LanTEK® III 
Touchscreen Technology Plus & Pro
Cable Verification
Advanced Wiremap Test •                     
Length to Open   Plus
TDR Length to Short/Fault   Pro
Fiber Optic Ready     Pro  
Performance Testing to Standards
IEEE Cable Transmission Performance Test          
IEEE Performance Test through Live Networks            
TIA-568/ISO 11801 Cable Certification            
Fiber Optic Performance Test           Optional Optional
Stores & Generates Test Reports     Plus & Pro
IDEAL AnyWARE app to import reports to phone     Plus & Pro
Tracing & Connectivity
Tone Generator (audible trace)
Flash Hub/Switch Link LED (visual trace)      
Ethernet Service Detection   Pro    
Checks for available PoE, Reports Volts & Pairs   Pro    
Reports Watts/Volts/Amps Available to PoE Device          
 


Spares and Accessories (Not Supplied):

  • 150058 RJ-45 replacement kit - Pack of 10 replacement inserts with extraction tool

About TREND Networks

With a great heritage in the industry, Ideal Networks division are now a major manufacturer of portable test equipment with expertise in both LAN and WAN installation and maintenance.
We continue to offer the best level of support to customers from our sales and technical offices in Warrington, UK; Paris, France; Munich, Germany and Sycamore, USA. New products are developed and designed continuously with the customer in mind from the R&D Centre based in Stokenchurch, UK.

Features & Specification

More Information
Key Features Advanced Wiremapping, Intergrated tone generator, Large backlit display, Memory function, Copper Cabling Network
Product Stock Status Next Day Delivery (subject to availability)
Manufacturer TREND Networks
Short Description

TREND NaviTEK NT Pro
Connectors
Test Ports
RJ45
Used for
- Cable Test
- Ethernet Test
Connector type
Lifejack with user-replaceable contacts
Optical
Used for
Ethernet Test
Connector type
SFP socket
System Ports
USB
Used for
- Software Update
- Results transfer
- 802.1x certificate transfer
- Import/export of config
- WiFi Adapter
Class
Host
Connector type
A
USB type
1.1
Power
Used for
Battery charging
Mains powering via adaptor
Connector type
2.5mm pin power jack
Polarity
Centre pin positive
Voltage
12v
Current
2 A
Location
Bottom of optional power module
(Not present in standard alkaline battery pack)
Controls
ON/OFF
Push button
Used for
Power ON/OFF
Function Keys
F1 to F3
Used for
Screen-defined functions
Navigation Keys
Cursor and ENTER
Used for
User interface navigation
Escape
Used for
Return to previous menu
Autotest
Used for
Launch of automatic test function
Reset
Push button
Used for
Escape from exceptional lockup condition
Displays
Screen
LCD
Used for
Display of setup functions and results
Location
Front
Size
2.8 inch diagonal
Type
QVGA Colour
Pixels
240 x 320
LEDs
Charger LED
Used for
Indication of charging status
Colour
Green
Location
Bottom of standard power module
(Not present in optional alkaline battery pack)
RJ45 Link LED
Use
ON indicates link UP
Colour
Green
RJ45 Activity LED
Use
Flashing indicates link activity
Colour
Green
Optical Link LED
Use
ON indicates Optical link UP
Colour
Green
Optical Activity LED
Use
Flashing indicates Optical link activity
Colour
Green
Ports
RJ45
Setup
Auto Negotiation
Enabled
Disabled
Speed
10Mb/s
100Mb/s
1Gbps
Mode
Full Duplex
Half Duplex
MDI
AUTO
MDI
MDIX
Min Rx Size
19:99 bytes
MAC
Factory set
VLAN
Enabled / Disabled
VLAN ID – 0 to 4094
VLAN Priority – 0 to 7
802.1x
Enabled / Disabled
EAP Method
EAP-MD5
EAP-MSCHAPV2
EAP-GTC
EAP-TLS
EAP-PEAP/MD5
EAP-PEAP/MSCHAPV2
EAP-PEAP/GTC
EAP-PEAP/TLS
EAP-TTLS/MD5
EAP-TTLS/MSCHAPV2
EAP-TTL/GTC
EAP-TTLS/TLS
Username
Password
Certificate
Import password
Root/CA certificate
Results
Link pulse polarity
Normal or Inverted
Link pulse height
Normal or Low
Tests
Ethernet Mode
Ping4
Ping6
Trace Route4
Trace Route6
Hub Blink
Netscan
Loopback
Auto (Ping DNS/Gateway/Internet, Trace Route,
Netscan)
Cable Mode
Wiremap
Tone Generator
Auto (Wiremap)
Service Detection
Detected Services
PoE (802.3af/at. Not Cisco pre-standard)
ISDN S
PBX
Unknown
Optical
Supported SFPs
The following SFP types are supported. Use of other types of SFP is
possible but correct operation is not guaranteed.
SFP Type SX
Manufacturer Part #
Avago AFBR-5705Z / Apac LM28-C3S-TI-N-DD
Speed
1Gbps
Fibre Type
Multimode
Wavelength
850nm
Connector Type
LC Duplex
Optical
SFP Type LX
Manufacturer Part #
Avago AFCT-5705Z
Speed
1Gbps
Fibre Type
Singlemode
Wavelength
1310nm
Connector Type
LC Duplex
SFP Type ZX
Manufacturer Part #
Apac LS48-C3U-TC-N-DD
Speed
1Gbps
Fibre Type
Singlemode
Wavelength
1550nm
Connector Type
LC Duplex
Setup
Speed
1Gb/s
Min Rx Size
19:99
MAC
Factory set
VLAN
Enabled / Disabled
VLAN ID – 0 to 4094
VLAN Priority – 0 to 7
802.1x
Enabled / Disabled
EAP Method
EAP-MD5
EAP-MSCHAPV2
EAP-GTC
EAP-TLS
EAP-PEAP/MD5
EAP-PEAP/MSCHAPV2
EAP-PEAP/GTC
EAP-PEAP/TLS
EAP-TTLS/MD5
EAP-TTLS/MSCHAPV2
EAP-TTL/GTC
EAP-TTLS/TLS
Username
Password
Certificate
Import password
Root/CA certificate
Tests
Optical
Tx Power dBm (using a specified SFP)
Rx Power dBm (using a specified SFP)
Ethernet Mode
Ping4
Trace Route4
Hub Blink
Netscan
NET TEST (Ping, Trace Route, Netscan)
Cable Tests
Wiremap
Setup
Cable Type
2 Pair
4 Pair 568A
4 Pair 568B
Colour Scheme
 
NVP
Fixed 72%
Custom 59% - 89%
Termination Type
None
Open
Active Remote
#1 - #12
Tests (No Termination)
Faults
Open circuit by pair
Short circuit by pin
Length of pair
Metres / Feet (Set in System Setup)
Range 3-100m / 10-330ft
Tests (Active Remote Termination)
I/D – Remote #
Indications on Remote
Voltage Warning (>±10volts on any pins)
Pass/Fail
Faults
– Open circuit by pin
Short circuit by pin
Crossed pairs
Split pairs
Bridged shorts
Remote shorts
Length of pair
Metres / Feet (Set in System Setup)
Range 3-100m / 10-330ft
Tone Generator
Setup
No of Tones
3
Wire I/D
Tone applied to one of 8 pins relative to the other 7
Tone applied across one of 4 pairs
Test
Audible tone detected using compatible tone probe
Ethernet Tests
IPv4
Setup
Addressing
DHCP
Static
Numerical
Address
Netmask
Gateway
DNS1
DNS2
IPv6
Setup
IPv6 Enable
Enabled
Disabled
Addressing
Stateful (DHCPv6)
Stateless
Static
Numerical
128bit HEX IP address
Network Prefix
64 bit
128 bit
Pingv4
Setup
Target
Numerical address
URL (Store up to 10)
Count
1 to 999999
Pause
1 to 5 Sec
Length
8 to 1000 bytes.
Results
Info
READY
IN PROGRESS
PASSED
NO RESPONSE
UNKNOWN HOST
Tx Count
1 to 999999
Rx Count
1 to 999999
Delay(ms)
Minimum
Average
Maximum
Trace Routev4
Setup
Target
Numerical address
URL
Max Hops
2 to 100
Timeout
2 to 30 sec
Type
ICMP
UDP
Results
Info
READY
IN PROGRESS
PASSED
NO RESPONSE
UNKNOWN HOST
Hop
Numerical address
Delay(ms)
t1
t2
t3
Netscan
Setup
Netscan
Local
Custom
Disabled
IP Address
IPv4 address
Scan Range
0 (class C /24)
1 (class C /20)
2 (class B /16)
Results
 
List of IPv4 hosts
List of IPv6 hosts
Blink
Test
Sequence
Off/10/Off/100/Off/1000 Mb/s (RJ-45)
Off/On (Optical)
Statistics
IP
Results
IPv4
 
info: listening, assigned, DHCP failed
DHCP or Static
IPv4 Address
IPv4 Netmask
IPv4 Gateway
IPv4 DNS1
IPv4 DNS2
IPv6
 
Enabled or Disabled
info: listening, assigned, DHCP failed
Stateful (DHCPv6) or Stateless or Static
IPv6 Address
IPv6 Network Prefix, 64 bit or 128 bit
IPv6 Link Address
IPv6 DNS
Discovery
 
LLDP/CDP/EDP
Protocol
MAC address
Hostname / address
Port Name
Max 10 hosts
VLAN
Detection
1 Level VLAN ID
Rx
LINK
Results
PORT
PoE Voltage 0 – 60V
PoE Pairs 12/36 or 45/78
Speed, Duplex
MDI / MDIX
Signal Level
Polarity
PARTNER
10M-HD
10M-FD
100M-HD
100M-FD
1000M-HD
1000M-FD
LINK
Results
ERRORS
Collisions
FCS Errors
Undersize
Oversize
Jabbers
Bad Length
Traffic Utilisation
Bargraph
Direction
Rx
Format
Percentage of Link rate
Peak value
Time Interval
1 min
10 min
60 min
Storage
Configurations
Internal storage
Number of configurations – 2 (Current & Factory settings)
Export/Import
Port
USB
Format
xml
Certificates
802.1x
Max number
10
Results
Internal storage
Max Number of Jobs (Projects)
50
Max Number of result sets per Job
5000 depending on tests performed
Max total number of result sets
Up to 5000 depending on tests performed.
Export
Port
USB
Wi-Fi
Format
PDF
CSV (summary only)
System
Setup
Owner
Details
Name
Company
Address
Phone
Setup
Preferences
Language
English
French
German
Spanish
Italian
Portuguese
Chinese
Auto off
Disabled
3 mins
10 mins
30 mins
Backlight
Always On
Dims to 50% after 3 mins
Length Units
Meters
Feet
Date Format
dd/mm/yy
mm/dd/yy
Time Format
12 hour
24 hour
Software update
Upgrade
Via USB
General
Date/Time
Internal Clock
Used for
Timestamping results
Autonomy
Up to 1 day with battery removed
Power
Battery
Supported Types
Standard power module (4 x AA NiMH cells)
Alkaline battery pack with 4 AA cells
Autonomy
Up to 5 hours (power module only)
Recharge time
3 hours (Power module only)
Battery level Indication
Full
2/3
1/3
Empty
Physical
Dimensions
Length
175mm
Width
80mm
Depth
40mm
Weight
Unit
0.22kg
Batteries
0.18kg
Environmental
Temperature
Operating
0°C to 40°C
Storage
-20°C to 70°C
Relative Humidity
Min
5%
Max
90% non-condensing
Approvals
EMC
EN 55022:2006 / A1:2007
EN55024:1998 / A1:2001 / A2:2003
Safety
IEC 60950-1:2005+A1:2009/EN 60950-1:2006+A1:2010

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration 

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT £4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays)  – UK Mainland only - Zones A & B  - ANY order value - Order by 2:00pm £7.75
Saturday ANYTIME Delivery - Order by 2:00pm £9.95
 

 

 

 

 

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

  • Zones A & B  - Mainland delivery rates apply. 
  • Zone C - Scottish Highlands (Charges are calculated at the checkout).
  • Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
  • Zone E - Northern Ireland (Charges are calculated at the checkout).
  • Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA