Fluke T5-600-62 Max + 1AC

£275.94

Fluke T5-600 Voltage, Continuity and Current Tester

Specifications
Jaw opening	12.9 mm (0.5 in)
Max wire size	1/0 THHN Cable
Current range ac rms	0 to 100.0 A
Accuracy ac current (50/60 Hz)	3 % ± 3 counts
AC Response	Averaging
Voltage range ac	0 to 600 V
Accuracy ac voltage	1.5 % ± 2 counts
Voltage range dc	0 to 600 V
Accuracy dc voltage	1 % ± 1 count
Resistance range	0 to 1000 Ω
Continuity beeper threshold	On at <25 Ω, off at >400 Ω
Volts indicator LED threshold	Guaranteed on by 30 V ac

Environmental Specifications
Operating Temperature	-10 °C to 50 °C
Storage Temperature	-30 °C to 60 °C
Humidity (Without Condensation)	0 % to 95 % (5 °C to 30 °C); 0 % to 75 % (30 °C to 40 °C); 0 % to 45 % (40 °C to 50 °C)
Dust/water resistance	Yes
Operating Altitude	2000 meters max
Temperature Coefficient	0.1 x (specified accuracy)/°C (<18 °C or >28 °C)

Safety Specifications
Overvoltage category	CAT III 600 V ac/dc (EN61010-1)
Agency Approvals	UL, CSA, and VDE
Maximum voltage	Between any terminal and earth ground

Mechanical and General Specifications
Size	30.5 mm x 51 mm x 203 mm
Weight	300g
Warranty	Two-years
Battery Life	200 hour zinc chloride, 400 hour alkaline
Battery type	2 x AA
Low battery indicator	Yes
Current sensor opening	12.9 mm
Calibration cycle	1 year
Test leads	Type:	Heavy duty, flexible leads rated for 1000V use. Field replaceable leads terminate in male shrouded banana plugs
	Probes:	One red, one black. Detachable Slim-Reach™ probe tips
	Styles:	TP1 Slim Reach™ Test Probes

Safety Specifications
Safety	CAT IV 600 V, CAT III, 1000 V
Maximum voltage	1000 V AC rms from earth to ground, in compliance with EN61010

Fluke 62 MAX+ Infrared Thermometer

Specifications
Temperature Range	-30 °C to 650 °C (-22 °F to 1202 °F)
Accuracy	±1.0 °C or ±1.0% of reading, whichever is greater -10 °C to 0 °C: ±2.0 -30 °C to -10 °C: ±3.0
Response Time (95%)	Fluke 62 MAX+	<300 ms (95% of reading)
	Spectral Response	8 to 14 microns
	Emissivity	0.10 to 1.00
Optical Resolution	12:1 (calculated at 90% energy)
Display Resolution	0.1 °C (0.2 °F)
Repeatability of Readings	±0.5% of reading or <±0.5 °C (1 °F), whichever is greater
Power	AA battery
Battery Life	8 hours with laser and backlight on
Physical Specifications	Weight	255 g (8.99 oz)
	Size	(175 x 85 x 75) mm (6.88 x 3.34 x 2.95) inches
	Operating Temperature	0 °C to 50 °C (32 °F to 122 °F)
	Storage Temperature	-20 °C to 60 °C (-4 °F to 140 °F), (without battery)
	Operating Humidity	10 % to 90 % RH non-condensing at 30 °C (86 °F)
	Operating Altitude	2000 meters above mean sea level
	Storage Altitude	12,000 meters above mean sea level
	IP Rating	IP 54 per IEC 60529
	Drop Test	3 meters
	Vibration and Shock	IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
	EMC	EN 61326-1:2006 EN 61326-2:2006
Standards and Agency Approval	Compliance	EN/IEC 61010-1: 2001
Standards and Agency Approval	Laser Safety	FDA and EN 60825-1 Class II

Description

This kit is designed to help electricians and HVAC technicians solve problems quicker. Test first for overheated electrical devices using an IR thermometer; then use electrical test tools to find out more about the problem.

Fluke T5 Voltage, Continuity and Current Testers.

Automatically measures volts ac and volts dc with precise digital resolution.
Displays resistance to 1000Ω.
Easy and accurate OpenJaw™ current measurement.
Continuity beeper.
Rugged enough to withstand a 10-foot (3m) drop.
600V model.
Auto off mode to conserve battery life.
AC current.
Display hold.
All inputs of the T5-600 are protected to EN61010-1 CAT III 600V. UL, CSA and VDE listed.

Fluke 62 MAX+. Small in size. Big on toughness.

Dust and water-resistant: IP54 rated.
Rugged: 3-meter (9.8-foot) drop tested.
Ergonomically designed: Completely redesigned for a more natural hand fit.
Distance to spot: 12:1.
Dual lasers: Identifies area to be measured.
Large, backlit display: Makes data easier to read, even in dark areas.
C115 Deluxe Soft Carrying Case with Shoulder Strap.

Fluke 1AC Features:

Voltbeat™ technology and continuous self-test -- so you always know it's working
Upon detection, tip glows and beeper sounds
CAT IV 1000 V for added protection
Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model
20 V to 90 V AC control circuit model also available

Features & Specification

More Information

Key Features

LCD Display, GS38 Compliant, Detachable Probes, Current Test, Hold Function

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Fluke Testers

Short Description

Fluke T5-600 Voltage, Continuity and Current Tester

Specifications
Jaw opening	12.9 mm (0.5 in)
Max wire size	1/0 THHN Cable
Current range ac rms	0 to 100.0 A
Accuracy ac current (50/60 Hz)	3 % ± 3 counts
AC Response	Averaging
Voltage range ac	0 to 600 V
Accuracy ac voltage	1.5 % ± 2 counts
Voltage range dc	0 to 600 V
Accuracy dc voltage	1 % ± 1 count
Resistance range	0 to 1000 Ω
Continuity beeper threshold	On at <25 Ω, off at >400 Ω
Volts indicator LED threshold	Guaranteed on by 30 V ac

Environmental Specifications
Operating Temperature	-10 °C to 50 °C
Storage Temperature	-30 °C to 60 °C
Humidity (Without Condensation)	0 % to 95 % (5 °C to 30 °C); 0 % to 75 % (30 °C to 40 °C); 0 % to 45 % (40 °C to 50 °C)
Dust/water resistance	Yes
Operating Altitude	2000 meters max
Temperature Coefficient	0.1 x (specified accuracy)/°C (<18 °C or >28 °C)

Safety Specifications
Overvoltage category	CAT III 600 V ac/dc (EN61010-1)
Agency Approvals	UL, CSA, and VDE
Maximum voltage	Between any terminal and earth ground

Mechanical and General Specifications
Size	30.5 mm x 51 mm x 203 mm
Weight	300g
Warranty	Two-years
Battery Life	200 hour zinc chloride, 400 hour alkaline
Battery type	2 x AA
Low battery indicator	Yes
Current sensor opening	12.9 mm
Calibration cycle	1 year
Test leads	Type:	Heavy duty, flexible leads rated for 1000V use. Field replaceable leads terminate in male shrouded banana plugs
	Probes:	One red, one black. Detachable Slim-Reach™ probe tips
	Styles:	TP1 Slim Reach™ Test Probes

Safety Specifications
Safety	CAT IV 600 V, CAT III, 1000 V
Maximum voltage	1000 V AC rms from earth to ground, in compliance with EN61010

Fluke 62 MAX+ Infrared Thermometer

Specifications
Temperature Range	-30 °C to 650 °C (-22 °F to 1202 °F)
Accuracy	±1.0 °C or ±1.0% of reading, whichever is greater -10 °C to 0 °C: ±2.0 -30 °C to -10 °C: ±3.0
Response Time (95%)	Fluke 62 MAX+	<300 ms (95% of reading)
	Spectral Response	8 to 14 microns
	Emissivity	0.10 to 1.00
Optical Resolution	12:1 (calculated at 90% energy)
Display Resolution	0.1 °C (0.2 °F)
Repeatability of Readings	±0.5% of reading or <±0.5 °C (1 °F), whichever is greater
Power	AA battery
Battery Life	8 hours with laser and backlight on
Physical Specifications	Weight	255 g (8.99 oz)
	Size	(175 x 85 x 75) mm (6.88 x 3.34 x 2.95) inches
	Operating Temperature	0 °C to 50 °C (32 °F to 122 °F)
	Storage Temperature	-20 °C to 60 °C (-4 °F to 140 °F), (without battery)
	Operating Humidity	10 % to 90 % RH non-condensing at 30 °C (86 °F)
	Operating Altitude	2000 meters above mean sea level
	Storage Altitude	12,000 meters above mean sea level
	IP Rating	IP 54 per IEC 60529
	Drop Test	3 meters
	Vibration and Shock	IEC 68-2-6 2.5 g, 10 to 200 Hz, IEC 68-2-27, 50 g, 11 ms
	EMC	EN 61326-1:2006 EN 61326-2:2006
Standards and Agency Approval	Compliance	EN/IEC 61010-1: 2001
Standards and Agency Approval	Laser Safety	FDA and EN 60825-1 Class II

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA