Fluke 902 FC TRMS HVAC Clamp Meter

£304.80

Function
A ac (via Jaw)
	Resolution	0.01/0.1 A
	Accuracy	2.0% ±5 digit (45-65 Hz)
	Accuracy	2.5% ±5 digit (65-400 Hz)
	Range	60.00/600.0 A
	Crest Factor (50Hz or 60Hz)	2.5 MIN@220 A 3.0 MIN@180 A > 1.4 MIN@600 A Add 2% for CF>400 A
V ac	Crest Factor (50Hz or 60Hz)
	Resolution	0.1 V
	Accuracy	1.5% ±5 digits
	Range	600.0 V
V dc
	Resolution	0.1 V
	Accuracy	1.5% ±5 digits
	Range	600.0 V
Ohms
	Resolution	0.1/1/10
	Accuracy	1% ±5 digits
	Range	600/6000/60.00 kΩ
Capacitance
	Resolution	0.1/1 µF
	Accuracy	1% ±4 digits
	Range	100.0/1000 µF
µA
	Resolution	0.1 µA
	Accuracy	1% ±5 digits
	Range	200 µA
Contact temperature
	Resolution	0.1 C/F
	Accuracy	1% ±8 digits
	Range	-10 to 400 °C (14 °F to 752 °F)
Continuity beeper
	Beeper volume	75 dBA nom. 15 cm. from case front
	On threshold	<=30 Ω
Mechanical and General Specifications
Maximum voltage between any terminal and earth ground	1000 V
Battery type	2 AA alkaline batteries, NEDA 15A, IEC LR6
Temperature	Operating: -10 °C to +50 °C (14 °F to +122 °F) Storage: -40 °C to +60 °C (-40 °F to +140 °F)
Operating humidity	Non condensing (< 10 °C [50 °F]), ≤90 % RH (at 10 °C to 30 °C [50 °F to 86 °F]), ≤75 % RH (at 30 °C to 40 °C (86 °F to 104 °F)), ≤45 % RH (at 40 °C to 50 °C (104 °F to 122 °F))
Altitude	Operating: 3,000 m (9,842 ft) Storage: 12,000 m (39,370 ft)
Dimensions	230 x 83.7 x 45.4mm (9.06 x 3.30 x 1.39 in)
Weight (meter only)	419 g (15 oz)
Safety	IEC 61010-1, Pollution Degree 2 IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V IEC 61010-2-033: CAT III 1000 V / CAT IV 600 V
IP Rating	IEC 60529: IP30, non-operating
Radio Frequency Certification	FCC ID:T68-FBLE IC:6627A-FBLE
Electromagnetic Compatibility (EMC)	International: IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2 CISPR 11: Group 1, Class A Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
Temperature coefficients	Add 0.1 × specified accuracy for each degree C above 28 °C or below 18 °C

Description

Fluke 902 FC True-rms HVAC Clamp Meter

Enables HVAC technicians to create reports and collaborate with peers from the work site

The Fluke 902 FC True-rms HVAC Clamp Meter, a wireless Fluke Connect®-enabled meter, improves the productivity of HVAC technicians in the field. The rugged dual rated - CAT III, 600 /CAT IV, 300 V - meter performs the essential measurements of HVAC systems — microamps for testing pilot light sensors, resistance up to 60 kilohms, AC current, AC/DC voltage, capacitance and contact temperature — eliminating the need to carry multiple tools. Its small body is easy to hold and the jaw fits perfectly in tight work spaces.

Fluke 902 FC Comes Supplied With:

TL75 test leads (1 pair)
80BK integrated DMM temperature probe (1)
AA alkaline batteries (2)
Soft carrying case
User's manual
Statement of calibration

As part of Fluke Connect — the industry’s largest system of software and more than 40 wireless test tools — the 902 FC can transmit measurements to a smartphone or tablet for later, detailed analysis. Those measurements can be uploaded to the cloud. Technicians can combine measurement data from multiple Fluke Connect test tools to create and share reports from the job site via email and collaborate in real time with other colleagues with ShareLive™ video calls or email, increasing productivity in the field.

The clamp meter also decreases the frequency that technicians will need to wear personal protective equipment when working on high voltage/current panels. Simply turn off the panel, verify the panel is de-energized using standard safety procedures, place the clamp and sync it to a smartphone with the Fluke Connect app, close the panel, reenergize it, and take measurements from a safe distance.

Applications for HVAC

200 µA DC current measurements to measure flame rod
Extended resistance range to measure thermistors up to 60kΩ
Capture flue gas temperature
Measure start and run motor capacitors
Measure performance of variable frequency drives

Fluke Connect

Fluke Connect connects your meter to your phone through Bluetooth to help you get more done faster and safer
Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
Troubleshoot better by instantly trending and monitoring measurements live on your phone screen
Create and email reports right from the field. Report not enough? Fluke Connect has ShareLive video calls that stream live video and measurements in the same screen
Don't stop to write down results, save them directly from your meter to your phone with the press of a button

Measurement capability

600 A ac current measurement
600 V ac and dc voltage measurement
Temperature measurement from -10 °C to 400 °C (14 °F to 752 °F)
1000 µF capacitance measurement
DC Current measurement to 200 µA
True-rms voltage and current for accurate measurements on non-linear signals
Resistance measurement to 60 kΩ
Min and max recording to capture variations automatically

Other features

CAT III 600V, CAT IV 300V safety rating
TPAK magnetic strap (optional) allows you to conveniently hang the meter while using the probes
Ergonomic design fits in your hand and can be used while wearing personal protective equipment
Large, easy-to-read backlit display
Three-year warranty
Soft carrying case

Features & Specification

More Information

Key Features

Current AC/DC, Tests Above 400A, TRMS, Backlit LED Screen, Data Hold

Manufacturer

Fluke Testers

Short Description

Function
A ac (via Jaw)
	Resolution	0.01/0.1 A
	Accuracy	2.0% ±5 digit (45-65 Hz)
	Accuracy	2.5% ±5 digit (65-400 Hz)
	Range	60.00/600.0 A
	Crest Factor (50Hz or 60Hz)	2.5 MIN@220 A 3.0 MIN@180 A > 1.4 MIN@600 A Add 2% for CF>400 A
V ac	Crest Factor (50Hz or 60Hz)
	Resolution	0.1 V
	Accuracy	1.5% ±5 digits
	Range	600.0 V
V dc
	Resolution	0.1 V
	Accuracy	1.5% ±5 digits
	Range	600.0 V
Ohms
	Resolution	0.1/1/10
	Accuracy	1% ±5 digits
	Range	600/6000/60.00 kΩ
Capacitance
	Resolution	0.1/1 µF
	Accuracy	1% ±4 digits
	Range	100.0/1000 µF
µA
	Resolution	0.1 µA
	Accuracy	1% ±5 digits
	Range	200 µA
Contact temperature
	Resolution	0.1 C/F
	Accuracy	1% ±8 digits
	Range	-10 to 400 °C (14 °F to 752 °F)
Continuity beeper
	Beeper volume	75 dBA nom. 15 cm. from case front
	On threshold	<=30 Ω
Mechanical and General Specifications
Maximum voltage between any terminal and earth ground	1000 V
Battery type	2 AA alkaline batteries, NEDA 15A, IEC LR6
Temperature	Operating: -10 °C to +50 °C (14 °F to +122 °F) Storage: -40 °C to +60 °C (-40 °F to +140 °F)
Operating humidity	Non condensing (< 10 °C [50 °F]), ≤90 % RH (at 10 °C to 30 °C [50 °F to 86 °F]), ≤75 % RH (at 30 °C to 40 °C (86 °F to 104 °F)), ≤45 % RH (at 40 °C to 50 °C (104 °F to 122 °F))
Altitude	Operating: 3,000 m (9,842 ft) Storage: 12,000 m (39,370 ft)
Dimensions	230 x 83.7 x 45.4mm (9.06 x 3.30 x 1.39 in)
Weight (meter only)	419 g (15 oz)
Safety	IEC 61010-1, Pollution Degree 2 IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V IEC 61010-2-033: CAT III 1000 V / CAT IV 600 V
IP Rating	IEC 60529: IP30, non-operating
Radio Frequency Certification	FCC ID:T68-FBLE IC:6627A-FBLE
Electromagnetic Compatibility (EMC)	International: IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2 CISPR 11: Group 1, Class A Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
Temperature coefficients	Add 0.1 × specified accuracy for each degree C above 28 °C or below 18 °C

Product Stock Status

Next Day Delivery (subject to availability)

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA