Drummond MTL15 High Voltage Test Lamp with Proving Unit and Case

The John Drummond MTL15 has a maximum working voltage of 1000V DC/AC rms and extended nominal voltage threshold indications of 50, 230, 400, 690C DC/AC rms. The CAT IV 1000V safety rating makes the MTL15 suitable for supply side applications in all installation categories as defined in BS EN 61010.

The robust design meets the recommendations of the Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38) as well as complying with the most recent changes to the voltage detector standard BS EN 61243-3 and the test equipment safety standard BS EN 61010.

Both the lamp housing and the probe have a finger shield and insulated probe tip with only 4mm of exposed metal. A two layer double insulated cable with white inner insulation gives a clear warning of abrasion that could compromise the user’s safety, and is resistant against heat and oil. The MTL Series of test lamps do not require batteries and have no ranges or switches to get wrong, ensuring reliable indication of hazardous voltages.

The MTL15 is supplied with six interchangeable test probes for safe and easy measurement in all types of application particularly where access is restricted. In addition to the standard 62mm straight and right angled probe, extended 130mm probes are included. For maximum ease of use, the right angled probes can be rotated through 90, 180 and 270 degrees and locked in position.

High intensity LEDs show four distinct bands of illumination for the different voltage thresholds up to 690V. The unique design provides a 360° viewing angle, even in bright sunlight. This allows reliable identification of potentially lethal voltages above 50V and enables the user to easily distinguish source voltages of different supply types. The MTL15 test lamp is the ideal solution for safely proving dead in many high power applications.

Drummond MTL15 Comes Supplied With:

• 2 straight prods
• 2 long straight prods
• 1 long angled prod
• 1 L-shaped prod
• Instructions
• Combination Carry Case
• PD690 Proving Unit

Key Features:

• Maximum working voltage: 1000V AC/DC
• Nominal voltage threshold indications: 50, 230, 400, 690V AC/DC
• Nominal voltage threshold tolerance: Conforms to BS EN 61243-3:2014
• Internal impedance at ELV a.c.: 30k:
• Range detection: Automatic Response time: <0.1s
• Frequency range: DC, 40-65Hz
• Test current: <3.5mA at 1000V AC/DC
• Duty ratio: 30s ON (operated) / 240s OFF (recovery)

PD690 Proving Unit:

Safe electrical work requires the use of a voltage indicator or test lamp that has been proved with a proving device before and after use.
The MTL15/PD includes a MTL15 test lamp complete with a PD690 proving unit and the TC69 combination carry case.

TC69 Combination Carry Case:

This TC69 soft carry case ensures that your proving device is always on hand and provides the simplest solution for implementing safe isolation practices on-site in accordance the Electricity at Work Regulations. For convenience and to save time, the proving unit can be used without having to remove it from the case.

Typical Applications:

• Wind turbines installations
• Energy intensive process industries
• High power variable speed drives
• UPS systems

Safety:

• Conforms to BS EN 61243-3:2014 CAT IV 1000V
• Class II, double insulation
• IP rating: IP64
• Probe tips comply with GS38
• Conforms to BS EN 61326-1
  
  

ISSWWW and Martindale Electric

Founded in 1928 and also owns Edgcumbe Instruments Metrohm® products, as well as the John Drummond Engineers range of test lamps. 
They are a British owned company, based in Watford, just 5 minutes from junction 5 of the M1. Their product range helps electricians and maintenance engineers carry out portable appliance testing, check fixed wiring for 17th Edition and Part P testing, safely prove dead, and measure everything from light and sound levels to microwave leakage and power consumption. We are proud to be able to offer Martindale's products and services and have done so for many years.

Bank/Public Holidays

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

• Zones A & B  - Mainland delivery rates apply. 
• Zone C - Scottish Highlands (Charges are calculated at the checkout).
• Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
• Zone E - Northern Ireland (Charges are calculated at the checkout).
• Zone F - Republic of Ireland (Charges are calculated at the checkout).
  
  

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA