Dilog DL9130EVKIT 18th Edition Advanced EV Testing Kit
Voltage |
|
|||
|
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
Display Range |
0V to 440V |
0V to 480V |
||
Measuring Range |
0V to 440V |
0V to 480V |
||
Resolution |
1V |
1V |
||
Voltage Accuracy |
+/- 5% +/- 2digits |
+/- 5% +/- 2digits |
||
Frequency Range |
45Hz – 65HzV |
45.0Hz – 65.0HzV |
||
Frequency Accuracy |
+/- 1Hz |
+/- 1.0Hz |
Continuity |
|
|||
|
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
Display Range (200mA) |
0.01Ω to 200Ω |
0.01Ω to 2000Ω |
||
Measuring Range (200mA) |
0.10Ω to 200Ω |
0.10Ω to 2000Ω |
||
Accuracy |
+/- 2% +/- 5 digits |
|||
Resolution |
0.01Ω to 1.99Ω 2.0Ω to 19.9Ω 20Ω to 200Ω |
0.01Ω to 19.99Ω 20.0Ω to 199.9Ω 200Ω to 2000Ω |
||
Test Voltage |
>4Vdc >25Vdc Open Circuit |
|||
Test Current |
>200mA |
|||
Display Range (15mA) |
|
|
|
0.01Ω to 200Ω |
Accuracy |
|
|
|
+/- 2% +/- 5 digits |
Resolution |
|
|
|
0.01Ω to 19.99Ω 20.0Ω to 199.9Ω |
|
|
|
|
>4Vdc >25Vdc Open Circuit |
|
|
|
|
>15mA |
Compliance |
IEC61557-4 and IEC61557-10 |
Insulation |
|
|
|
||||
|
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
|||
Display Range |
0.01MΩ to 200MΩ |
||||||
Display Range |
0.05MΩ to 200MΩ |
||||||
Accuracy |
+/-5% +/-5 digits |
||||||
Resolution |
0.01MΩ to 1.99MΩ 2.0MΩ to 19.9MΩ 20MΩ to 200MΩ |
||||||
Alarm Warning |
<1MΩ Audible |
<1MΩ Screen & Audible |
|||||
Test Voltage |
250/500 |
250/500/1000V |
|||||
Test Voltage Specification |
-0% +20% (open circuit) |
||||||
Test Current |
1mA into UN (1000Ω/V) |
||||||
Compliance |
IEC61557-2 and IEC61557-10 |
||||||
No Trip Loop Impedance |
|
|||
|
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
Supply voltage |
195-253V, 45Hz – 65Hz |
|||
Display Range |
0.01Ω to 2000Ω |
|||
Measuring Range |
1.00 to 1999Ω (non-trip) |
|||
Accuracy |
+/-5% +/-12 digits (to 20Ω) +/-5% +/-5 digits (to 2000Ω) |
|||
Resolution |
0.01Ω to 1.99Ω 2.0Ω to 19.9Ω 20Ω to 2000Ω |
0.01Ω to 9.99Ω 10.0Ω to 99.9Ω 100Ω to 2000Ω |
||
Test Current |
<15mA RMS |
High Current Loop Impedance |
|
|||
|
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
Supply voltage |
195-253V, 45Hz – 65Hz |
|||
Display Range |
0.01Ω to 2000Ω |
|||
Measuring Range |
0.10Ω to 1999Ω (high current) |
|||
Accuracy |
+/-5% +/-12 digits (to 20Ω) +/-5% +/-5 digits (to 2000Ω) |
|||
Resolution |
0.01Ω to 1.99Ω 2.0Ω to 19.9Ω 20Ω to 2000Ω |
0.01Ω to 9.99Ω 10.0Ω to 99.9Ω 100Ω to 2000Ω |
||
Test Current |
3A RMS |
Loop Test PFC Measurement |
|
|||
|
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
Display Range |
1A to 26kA |
0.1A to 26.0kA |
||
Accuracy |
+/-5% +/-5 digits |
+/-5% +/-5 digits |
||
Resolution |
1A to 999A 1kA to 26kA |
0.1A to 999.9A 1.0kA to 26.0kA |
High Current Line Impedance |
|
|
|||
|
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
|
Display Range |
0.01Ω to 2000Ω |
0.01Ω to 2000Ω |
|||
Measuring Range |
0.10Ω to 2000Ω |
0.10Ω to 2000Ω |
|||
Accuracy |
+/-5% +/-5 digits |
+/-5% +/-5 digits |
|||
Resolution |
0.01Ω to 1.99Ω 2.0Ω to 19.9Ω 20Ω to 2000Ω |
0.01Ω to 9.99Ω 10.0Ω to 99.9Ω 100Ω to 2000Ω |
|||
Supply Voltages |
195V – 253V
|
195V – 253V 328V – 440V |
195V – 253V 328V – 480V |
||
Test Current |
3A RMS Peak |
||||
Line Test PSC Measurement |
|
|||
|
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
Range |
1A to 26kA |
0.1A to 26.0kA |
||
Accuracy |
+/-5% +/-5 digits |
+/-5% +/-5 digits |
||
Resolution |
1A to 999A 1kA to 26kA |
0.1A to 999.9A 1.0kA to 26.0kA |
RCD Trip Time Test |
|
|||
|
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
Supply Voltages |
195-253V, 45Hz – 65Hz |
|||
RCD Types |
AC, A & Selective |
AC, A, B & Selective |
||
Nominal Test Current |
10mA/30mA/100mA ( ½ , 1, 5 I∆n) 300mA/500mA ( ½, 1 I∆n) |
10mA/30mA/100mA ( ½ , 1, 5 I∆n) 300mA/500mA ( ½, 1 I∆n) Variable Mode |
||
Variable RCD Test |
|
1mA – 500mA |
||
Test Current Accuracy |
-0% +10% at I∆n and 5I∆n -0% +10% at ½ I∆n |
|||
Trip Time Ranges |
0 to 2000ms ½ I∆n 0ms - 300ms I∆n general 0ms - 500ms I∆n selective 0 to 40ms 5 I∆n |
|||
Trip Time Accuracy |
+/- 5% +/- 2 digits |
|||
Nominal Test Current |
10mA/30mA/100mA ( ½ , 1, 5 I∆n) 300mA/500mA ( ½, 1 I∆n) |
|||
Compliance |
IEC61557-6 and IEC61557-10 |
RDC-DD Trip Time Test |
|
|||
|
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
Supply Voltages |
|
195-253V, 45Hz – 65Hz |
||
Current Type |
|
DC |
||
Nominal Test Current |
|
6mA |
||
Test Current Accuracy |
|
-0% +10% |
||
Trip Time Ranges |
|
0 to 10000 I∆n |
||
Trip Time Accuracy |
|
+/- 5% +/- 2 digits |
||
Ramp Test Current Range |
|
2mA – 10mA |
||
Compliance |
IEC61557-6 and IEC61557-10 |
RCD (Ramp) Trip Current Test |
|
|
Range |
0.5 I∆n to 1.1 I∆n |
|
Range (6mA DC) |
|
0.1mA to 10mA (over 30 seconds) |
Accuracy |
+/-5% of the expected current |
|
Step Size |
0.1*∆n |
|
Step duration |
300ms |
|
Compliance |
IEC61557-6 and IEC61557-10 |
Additional Date |
|
|
||||
|
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
||
Weight |
1360g |
|||||
Dimensions |
Width 236mm Depth 130mm Height 91mm |
|||||
DL911x Boxed |
3045g |
3075g |
3045g |
3075g |
||
DL911x Boxed Dimensions |
Width 380mm Depth 195mm Height 250mm |
|||||
EAN Barcode |
5060082543463 |
5060082543449 |
5060082544156 |
5060082544163 |
||
Box Contents |
|
|
||
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
|
Multifunction Tester |
Multifunction Tester |
|||
Padded neck strap |
Padded neck strap |
|||
Professional toolbox style carry case |
Professional toolbox style carry case |
|||
Mains lead |
Mains lead |
|||
1.2M black test lead |
1.2M Blue test lead |
|||
1.2M red test lead |
1.2M red test lead |
|||
1.2M green test lead |
1.2M green test lead |
|||
Black crocodile clip |
Blue crocodile clip |
|||
Red crocodile clip |
Red crocodile clip |
|||
Green crocodile clip |
Green crocodile clip |
|||
MN1500 (AA) 1.5v Batteries x 6 |
MN1500 (AA) 1.5v Batteries x 6 |
|||
Operating Instruction Manual |
Operating Instruction Manual |
|||
Calibration certificate |
Calibration certificate |
|||
(Optional) |
Remote Test Probe |
(Optional) |
Remote Test Probe |
|
DL9100 Series Spares and Accessories |
|
|
||
DL9110 |
DL9118 |
DL9120 |
DL9130EV |
|
LS3W9073 – Red/Black/Green 3 wire lead set c/w croc clips and probes |
LS3W9100 – Red/Blue/Green 3 wire lead set c/w croc clips and probes |
|||
ML9073 – Red/Black/Green 13A to 4mm mains lead |
ML9100 – Red/Blue/Green 13A to 4mm mains lead |
|||
RP9100 – Remote Test Probe (suitable for DL9100 Series testers) |
||||
CCDL9100 – Toolbox Style Carry Case |
||||
AF27B – 1.6A 1000V HRC FF Fuse |
????? – 200mA ………… |
|||
|
|
|||
|
|
|||
|
|
|
|
|
Environmental Conditions
The DL9120 / DL9130EV has been designed to perform tests and measurements in a dry indoor environment.
- Operating Altitude 0 to 2000 metres.
- Overvoltage category IEC 60664/IEC 61010, 300V Category III.
- Pollution degree 2 according to IEC 61010-1.
- Protective system IP40 according to IEC 60529.
- Electromagnetic compatibility (EMC). Interference immunity and emitted interference conforming to IEC 61326-1.
- Operating temperature range of 0°C to 40°C.
- Operating humidity up to 75% without condensation.
The DL9120 / DL9130EV can be stored at any temperature in the range -25°C to +65° The batteries should be taken out of the instrument for storage.
For help or advice on Service and Calibration contact:
Service Department
Di-Log Test Equipment
28 Wheel Forge Way
Trafford Park
Manchester
M17 1EH
UK
Tel: 0161 877 0322
Fax: 0161 877 1614
email: support@dilog.co.uk
web: www.dilog.co.uk
Description
Dilog DL9130EVKIT Complete 18th Edition Advanced EV Testing Kit
*Important Calibration Information:
This instrument comes complete with a manufacturer’s UKAS calibration certificate.
Please be aware that these certificates are generic and may also be time lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.
18th Edition Complete EV Kit with DLEV1 EVSE Charge Station Adaptor
The Di-LOG DL9130EVKIT Complete Test Kit has been explicitly designed for service engineers that offer EV installation as part of their testing portfolio. The DL9130EVKIT Complete kit includes Di-LOG’s latest EV Multifunction Tester, the DL9130EV, along with the DLEV1 EVSE Charge Station Adaptor.
The DL9130EV has several exciting new features critical to the safe verification of EVSE Charge Station Installations. Including a 6mA pure DC test for RDC-DD verification which can be combined with a full Auto EV testing sequence. The Auto EV sequence feature simply varifies the DC protection provided by the EV charger, along with the Type A RCD protection provided by the sub-distribution board.
Kit Key Features:
- 6ma RDC-DD Pure DC Test
- Auto EV Test Sequence
- Auto Start Loop & Continuity tests
- Type AC, A, B & Selective (S) RCD Testing
- Rmax & Zmax
- Variable RCD Test
- Colour LCD display with colour change feature
- Proximity Pilot (PP) State 13, 20, 32 & 63A
- Control Pilot (CP) State A, B, C & D
- Error including – PE Pre-Test, CP Error “E” & PE Error
- Type 1 & Type 2 Charge Plugs supplied
- Supplied with a UKAS Calibration Certificate fully traceable to national standards (DL9130EV)
Additional Features:
- 6mA pure DC test for RDC-DD verification and a full Auto EV testing sequence for verifying the DC protection provided by the EV charger, along with the Type A RCD protection
- Loop Impedance/PSCC – Unique auto start RCD-LOC XLT loop test principle will not trip any RCD or RCBO
- 2/3 wire high current loop with intelligent detection identifying if the user is conducting a 2 wire or 3 wire Loop/PSCC measurement without the need for selection
- RGB colour changing screen visually indicating potential pass/fail conditions
- Phase to Phase Loop with Phase Rotation Test – will indicate the correct phase sequence
- Continuity test – with auto start & null facility to zero out lead resistance
- Auto RCD testing – Trip time, trip current, auto test and ramp current
- Type AC, A, B & Time Delayed RCDs (S)
- Insulation measurement – with 250, 500 & 1000V test voltages
- Phase Rotation Test – will indicate the correct phase sequence
- Integrated socket polarity test
- Fully protected against damage when accidentally connected across phases
- Proximity Pilot (PP) State to simulate the charge lead resistances related to charging lead current limits
- Control Pilot (CP) State to simulate the communication signal emitted from an Electric Vehicle to indicate its readiness to receive a charge.
Brand New Features
A brand-new feature explicitly added to the DL9130EV is Rmax. This brand-new concept will automatically capture the maximum R1+R2/R2 continuity test reading which will register the result on the secondary display for recording once testing is complete. In addition, Di-LOG has added the Zmax feature.
Type B RCD Testing
Type B RCDs are becoming more frequent in PV and EV installations, so it is vital that when needed, your multifunction tester can perform a Pure DC RCD test. A variable RCD feature has also been added to the DL9120 & DL9130EV enabling the user to dial in bespoke mA values when the need arises.
Intelligent User Features at the press of a button
With a brand new RGB colour-changing screen that visually indicates potential pass/fail conditions, the DL9130EV offers intelligent user features. One of our intelligent features is Zmax, this will record the maximum Zs test recorded during a recording session. A fully automated Continuity & Earth Loop Auto Start with a secondary display to capture the recorded results. Never seen before on a multifunction tester, is the high current loop with intelligent detection identifying if the user is conducting a 2 wire or 3 wire Loop/PSCC measurement without the need for selection.
EVSE Test Adaptor Kit
The DLEV1 is a universal EVSE Charge Station Adaptor Kit that will simulate the Proximity Pilot (PP) States and Control Pilot (CP) States required to energise a free-standing or wall-mounted EV charger. Supplied with a type 1 and type 2 connector plug specifically designed for testing, the DLEV1 kit will also simulate PE Pre-test, CP Error “E” and PE Error with the added feature of CP signal output and load connection.
The DLEV1 has a 13A socket for MFT mains lead or can be used for inline load connection. In addition to this, there are also 4mm input terminals for single or 3-phase connections.
The DL9130EVKIT MFT Test Kit offers incredible value for a feature-packed MFT meeting all the safety and performance requirements of BS EN 61557.
About Di-Log
Di-Log Test Equipment offers a comprehensive range of test equipment from a voltage indicator to 18th Edition and Thermal Imaging to portable appliance testing kits. All Di-Log instruments are designed and manufactured to the highest quality specification and you can be assured that all manufacturing processes adhere to internationally recognised standards. Di-Log instruments are accurate, safe and rugged – you won’t find a better balance between cost and functionality.
Features & Specification
Key Features | Comes with UKAS calibration certificate, 6ma RDC-DD Pure DC Test, Auto EV Test Sequence, Auto Start Loop & Continuity tests, Rmax & Zmax, Error including – PE Pre-Test CP Error “E” & PE Error, Type 1 & Type 2 Charge Plugs supplied | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Manufacturer | Dilog | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Short Description |
Environmental Conditions The DL9120 / DL9130EV has been designed to perform tests and measurements in a dry indoor environment.
The DL9120 / DL9130EV can be stored at any temperature in the range -25°C to +65° The batteries should be taken out of the instrument for storage. Service Department Di-Log Test Equipment 28 Wheel Forge Way Trafford Park Manchester M17 1EH UK Tel: 0161 877 0322 Fax: 0161 877 1614 email: support@dilog.co.uk web: www.dilog.co.uk |
Delivery
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
Service | Price |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA