Toggle Nav
Search

CScope SGA4 Signal Generator

£676.80
Be the first to review this product

Product name
SGA4 Signal Generator

Part No.
SGA4

Controls
All operation is by push button control as follows:

  • On/Off
  • Power Level: 2 available power levels via High and Low Power buttons
  • Pulse/Continuous Output: toggles between pulse or continuous output using one push button
  • Audio/Mute: toggles between loud or muted audio output using one push button

Audio Indications

  • Audio Feedback on button push
  • Audio pitch drops with increasing load current in Connected Mode
  • Audio pitch changes with power level in Induced Mode
  • Audio output pulses to indicate Pulsed Mode
  • Low battery indicated by interrupted Audio and output signal

Output

  • Induced = 32,768Hz
  • Connected = 131,072Hz and 32,768Hz
  • Carrier Pulse Frequency: 7.5Hz (pulsed mode)

Connected Mode
Connection Mode automatically selected when lead is plugged into socket

Maximum Output Voltage (open circuit)
28V rms

Maximum Output Current (short circuit)
65mA rms

Maximum Power
1W into 400Ω load

Construction

  • Case moulded from high impact plastic
  • Designed to withstand 1m (3’3”) drop onto a hard surface
  • Incorporates clip on accessory storage compartment

Weight (including batteries, Connection Leads and Earth Stake)
3.4kg (7 lb 7 oz)

Dimensions (with Accessory Tray fitted)
360mm x 180mm x 230mm (14.1” x 7” x 9”)

Battery Type
Internal 4 x ‘D’ (LR20) cells (either alkaline non-rechargeable or NiMH rechargeable)

Battery Life
up to 40 hours intermittent use at 20ºC (68ºF) using alkaline cells

IP Rating
65

Notes:
Performance figures stated can be affected by site parameters such as ground conditions, temperature, and strong electromagnetic fields. Specification may be subject to change. All C.Scope Signal Generators are in compliance with the essential requirements and other relevant provisions of Council Directive 2014/53/EU (EMC). Compliance has been demonstrated by testing representative samples to the harmonised standards EN300-330 and EN301-489. The essential radio test suites have been carried out and the equipment is in conformity with all applicable directives. All C.Scope Signal Generators comply with the essential requirements and other provisions of Council Directive 2011/65/EU (RoHS).

 

Unit Features SGA4
One Watt Power •
Power Levels 2
Generator Frequencies: •
 – 33+131kHz (Connected at 33+131kHz. Induced at 33kHz only.) •
 – 131kHz (Connected and Induced) –
 – 33kHz (Connected and Induced) –
 – 8kHz (Connected and Induced) –
 – 512Hz (Connected) –
 – 640Hz (Connected) –
Pulsed / Continuous Output Signal •
Signal Connection Modes: •
 – Direct Connection •
 – Wraparound •
 – Induction •
Automatic Daily Self Test –
Data Logging –
Data Transfer via USB –
High Resolution Backlit Liquid Crystal Display –
No Periodic Calibration* •
Three Year Warranty** •
Batteries*** 4 x D (LR20) Alkaline or NiMH Rechargeable •
In-Built Accessory Tray**** •
IP65 •

 

* No Periodic Calibration. The SGA4 does not require periodic recalibration. A Product Validation Certificate can be printed using the PC Toolkit. C.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal regulations.

** Three Year warranty. Conditions apply.

*** Batteries. 4 x D LR20 Alkaline or NiMH Rechargeable batteries housed in a secure battery compartment.

**** In-Built Accessory Tray includes Direct Connection Lead, Auxiliary 10m Earth Lead, Connection Magnets, Earth Stake and Instruction Manual.

|

Description

CSCOPE SGA4 Signal Generator

For use with the CScope CXL4 and DXL4 Cable Avaoidance Testers

 

The C.Scope SGA4 is an affordable Signal Generator designed for use alongside a CXL4 or DXL4 Cable Avoidance Tool. It enables significantly more underground utilities to be detected including street lighting cables.

A C.Scope SGA4 Signal Generator is a vital accompaniment to a C.Scope CXL4 and DXL4 Cable Avoidance Tool and significantly increases the number of buried services that can be detected and reduce the day-to-day risk of cable strikes.

 

SGA4 Signal Generator Comes Supplied With:

  • Direct Connection Leads
  • Connection Magnets
  • Earth Stake
  • Auxilliary 10 metre Earth Lead

 

Key Features:

  • One Watt High/Low Power Output
  • Simultaneous 33+131kHz Signal
  • Pulsed or Continuous Output Signal
  • Three Signal Application Techniques:
  • Direct Connection / Wraparound / Induction
  • No periodic Calibration required
  • In-built Accessory Tray

 

Simultaneous Dual Frequency

The simultaneous dual-frequency 33kHz and 131kHz signal output of the Signal Generators is ideal for maximising the number of buried services that can be energised and then detected.

The SGA4 Signal Generator can apply the dual frequency signal without direct connection to buried services, using either a Signal Clamp or the simple induction method from ground level, providing a significant improvement in the detection of the smaller diameter or poorly earthed cables.

Three Signal Application Techniques

The SGA4 offers three alternative ways to apply a Signal Generator signal:

Direct Connection allows specific pipes or cables to be individually traced, identified and their depths measured. The use of Signal Clamps, Signal Injectors and Direct Connection leads make this mode the most effective method for pinpointing pipes and cables.

If it is difficult or inconvenient to use Direct Connection, then the Wraparound technique can be utilised to successfully energise a street or car park lighting cable.

Induction allows the Signal Generator to induce a detectable and traceable signal to previously unknown, undetected or inaccessible underground metal pipes or cables.

High Power Signal

The fully adjustable One Watt Power Output of the SGA4 means that deeper and less conducting pipes and cables can be effectively energised and then traced over ever longer distances.

It also features a two position power levels so the operator has some control of how much power is in use and when.

Pulsed/Continuous Signal Output
A Pulsed or Continuous signal output allows operators to switch to the Pulsed Mode at the push of a button in high interference situations and keep on tracing. The SGA4 has a clear audible signal output to indicate when it is in operation.

A useful in-built audio mute control is also included.

Robust & Durable Construction

The SGA4s twin wall construction is robust and durable. It also provides IP65 standard protection against dust and water ingress.

Accessory Tray

The SGA4 Signal Generator has a large detachable accessory tray as its base. It can house not only the standard accessories (Direct Connection Leads, Earth Stake, Connection Magnets, 10m Auxiliary Earth Lead) and the Instruction Manual but also many of the optional extras such as Signal Clamps, Sondes and Signal Injectors.

Three Year Warranty

The SGA4 comes with a three year Warranty (conditions apply).

Features & Specification

More Information
Key Features 2 Power Modes, Dual Frequency, Pulsed/Continuous Output, Robust and Weatherproof
Product Stock Status Next Day Delivery (subject to availability)
Manufacturer CScope
Short Description

Product name
SGA4 Signal Generator

Part No.
SGA4

Controls
All operation is by push button control as follows:

  • On/Off
  • Power Level: 2 available power levels via High and Low Power buttons
  • Pulse/Continuous Output: toggles between pulse or continuous output using one push button
  • Audio/Mute: toggles between loud or muted audio output using one push button

Audio Indications

  • Audio Feedback on button push
  • Audio pitch drops with increasing load current in Connected Mode
  • Audio pitch changes with power level in Induced Mode
  • Audio output pulses to indicate Pulsed Mode
  • Low battery indicated by interrupted Audio and output signal

Output

  • Induced = 32,768Hz
  • Connected = 131,072Hz and 32,768Hz
  • Carrier Pulse Frequency: 7.5Hz (pulsed mode)

Connected Mode
Connection Mode automatically selected when lead is plugged into socket

Maximum Output Voltage (open circuit)
28V rms

Maximum Output Current (short circuit)
65mA rms

Maximum Power
1W into 400Ω load

Construction

  • Case moulded from high impact plastic
  • Designed to withstand 1m (3’3”) drop onto a hard surface
  • Incorporates clip on accessory storage compartment

Weight (including batteries, Connection Leads and Earth Stake)
3.4kg (7 lb 7 oz)

Dimensions (with Accessory Tray fitted)
360mm x 180mm x 230mm (14.1” x 7” x 9”)

Battery Type
Internal 4 x ‘D’ (LR20) cells (either alkaline non-rechargeable or NiMH rechargeable)

Battery Life
up to 40 hours intermittent use at 20ºC (68ºF) using alkaline cells

IP Rating
65

Notes:
Performance figures stated can be affected by site parameters such as ground conditions, temperature, and strong electromagnetic fields. Specification may be subject to change. All C.Scope Signal Generators are in compliance with the essential requirements and other relevant provisions of Council Directive 2014/53/EU (EMC). Compliance has been demonstrated by testing representative samples to the harmonised standards EN300-330 and EN301-489. The essential radio test suites have been carried out and the equipment is in conformity with all applicable directives. All C.Scope Signal Generators comply with the essential requirements and other provisions of Council Directive 2011/65/EU (RoHS).

 

Unit Features SGA4
One Watt Power •
Power Levels 2
Generator Frequencies: •
 – 33+131kHz (Connected at 33+131kHz. Induced at 33kHz only.) •
 – 131kHz (Connected and Induced) –
 – 33kHz (Connected and Induced) –
 – 8kHz (Connected and Induced) –
 – 512Hz (Connected) –
 – 640Hz (Connected) –
Pulsed / Continuous Output Signal •
Signal Connection Modes: •
 – Direct Connection •
 – Wraparound •
 – Induction •
Automatic Daily Self Test –
Data Logging –
Data Transfer via USB –
High Resolution Backlit Liquid Crystal Display –
No Periodic Calibration* •
Three Year Warranty** •
Batteries*** 4 x D (LR20) Alkaline or NiMH Rechargeable •
In-Built Accessory Tray**** •
IP65 •

 

* No Periodic Calibration. The SGA4 does not require periodic recalibration. A Product Validation Certificate can be printed using the PC Toolkit. C.Scope authorised Service Centres are also able to provide third-party Test and Calibration Certification should you require it to comply with client or internal regulations.

** Three Year warranty. Conditions apply.

*** Batteries. 4 x D LR20 Alkaline or NiMH Rechargeable batteries housed in a secure battery compartment.

**** In-Built Accessory Tray includes Direct Connection Lead, Auxiliary 10m Earth Lead, Connection Magnets, Earth Stake and Instruction Manual.

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration 

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT £4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays)  – UK Mainland only - Zones A & B  - ANY order value - Order by 2:00pm £7.75
Saturday ANYTIME Delivery - Order by 2:00pm £9.95
 

 

 

 

 

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

  • Zones A & B  - Mainland delivery rates apply. 
  • Zone C - Scottish Highlands (Charges are calculated at the checkout).
  • Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
  • Zone E - Northern Ireland (Charges are calculated at the checkout).
  • Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA