CSCOPE DXL3 Cable Avoidance Tool

Designed for use with an SGA3 Signal Generator

Hitting and damaging buried services when excavating is costly and potentially very dangerous. The C.Scope Cable Avoidance Tool is the ideal ‘pick-up-and-go tool to locate buried pipes and cables, quickly and reliably, time after time.

Safe, Simple, Quick and Reliable

The C.Scope Cable Avoidance Tool has three familiar detection modes (POWER, RADIO AND GENERATOR) to select from. Each mode provides its own specific advantages. Many operators will be familiar with these operating modes.

The POWER mode is the quickest way to detect most buried electricity cables by detecting the signal created by the electrical current itself.

The RADIO mode detects re-radiated Radio type signals that are often present on metal pipes and cables allowing their position to be determined using just the Cable Avoidance Tool alone.

The GENERATOR mode is used to detect the signal applied to a metal pipe or cable by a C.Scope SGA3 Signal Generator. In addition the Generator mode can be used to detect the signal being transmitted by a C.Scope Sonde for non-metallic pipe tracing.

When combined with a C.Scope SGA3 Signal Generator and accessories, the Cable Avoidance Tool becomes a versatile, all round pipe and cable locating and tracing package. Robustly made and equipped with LCD meter, detachable loudspeaker and easy-to-operate fingertip controls the C.Scope Cable Avoidance Tool is the ideal Locator for all levels of staff who need to be able to detect buried services quickly and with confidence.

Depth Measurement:

The DXL3 Cable Avoidance Tool also features the addition of a simple to operate Depth Measurement button on the top of the product (for use in GENERATOR Mode).

Key Features:

• Power Mode
• Radio Mode
• Depth Detection
• Generator Mode:
  33kHz frequency detection for locating utilities
• Liquid Crystal display (LCD)
• Real Audio response
• Provision for spare battery storage
• Retractable loudspeaker
• Annual Calibration checks required
• Fully weatherproof design to IP65
• Three year warranty (conditions apply)

 Increased Effectiveness, Less Cable Strikes

The SGA3 Signal generator (not supplied) is designed for use alongside an XL3 Cable Avoidance Tool. Using the combination of a signal generator with a Cable Avaoidance Tool makes the task of cable avoidance far more effectiveand significantly the number of buried services that can be detected and reducing the day-to-day risk of cable strikes.

The 33kHz SGA3 Signal Generator can energise a buried metal pipe or cable by either 'direct connection' to the target pipe or cable, or the simpler 'induction' method from above ground.

The CSCOPE SGA3 will optimise the performance of the Cable Avoidance Tool enabling operators to locate more buried utilities including street lighting cables.

The SGA3 features a 2 position power level adjustment so the operator has control of how much power is in use and when.
A pulsed or continuous signal output allows operators to switch to the pulsed mode at the push of a button in high interference situations and keep on tracing. 
The SGA3 has a clear audible signal output to indicate when it is in operation. A useful in-built audio mute control is also included. 

Batteries

Calibration

The DXL3 Cable Avoidance Tool does require annual recalibration.

Three year Warranty

The DXL3 Cable Avoidance Tool comes with a three year Warranty (conditions apply).

See also:

CSCOPE CXL3 Cable Avaoidance Tool, details as the DXL3 but without depth measurement indication.

CSCOPE SGA3 Signal Generator, for use with CSCOPE CXL3 and DXL3 Cable Avaoidance Tools.

Spares and Accessories:

• YIRC-33-8 Signal Clamp 33kHz, 8kHz
• YIRIP-33-8 Signal Injector UK Version 33kHz, 8kHz
• YIRIP-33-E Signal Injector European Version 33kHz, 8kHz
• YCB/CS Professional Carry Bag
• YCB/L Large Carry Bag
• B4026A Direct Connection Leads for use with SGA3
• B4028A Diect Connection Leads for use with SGA4, SGV4 and MXT4
• H2466 Connection Magnet for use with SGA4, SGV4 and MXT4
• B4022A Auxillary 10M Earth Lead for use with SGA3
• B4020A Auxillary 10M Earth Lead for use with SGA4, SGV4 and MXT4
• H2338 Earth Stake for use with SGA3, SGA4, SGV4 and MXT4
• B1093E XL3/SG3 Operating Instruction Manuals for use with CXL3, DXL3 and SGA3
• B1094E XL4/SG4 Operating Instruction Manuals for use CXL4, DXL4, MXL4, SGA4, SGV4 and MXT4
• B1080 Accessories operating Instruction Manuals for use with all accessories

Bank/Public Holidays

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

• Zones A & B  - Mainland delivery rates apply. 
• Zone C - Scottish Highlands (Charges are calculated at the checkout).
• Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
• Zone E - Northern Ireland (Charges are calculated at the checkout).
• Zone F - Republic of Ireland (Charges are calculated at the checkout).
  
  

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA