Metrel MD9272 AC DC Leakage TRMS Clamp Meter

High accuracy leakage current and power measurements

MD 9272 is a unique earth leakage clamp meter. It not just has the ability to accurately read the TRMS AC leakage current of a system, it can also detect losses in the system and suggest possible reasons for the loss. The voltage (AC/DC), frequency, power, harmonic, power factor (PF), total harmonic distortion (THD) and crest factor measurements make this instrument suitable for any electrician and engineer.

MD9272 Comes Supplied With:

• Current clamp MD 9272
• Test lead with probe, 2 pcs
• 1.5 V battery, type AA, 2 pcs
• Pouch
• Instruction manual
• Warranty

Measuring Functions:

• TRMS AC, DC voltage measurement. 
• TRMS AC current measurement. 
• Frequency measurement. 
• Power parameters measurement.

Key Features:

• TRMS: accurate measurements on sinusoidal and non-sinusoidal signals. 
• Jaw size: 28 mm. 
• Shielded Jaw: shielded jaw allows the clamp meter to be used in the noisiest environments. 
• Accurate: readings of AC current with an accuracy of 0.8 % and a base resolution of 0.01 mA and voltage with an accuracy of 0.5 % and a base resolution of 0.01 V. 
• Power: measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement). 
• Intelligent loss analysis: complex algorithms detect loss and allow determining possible reasons for current loss. 
• Harmonics: measures current or voltage harmonic components and a percentage value of a harmonic up to the 19th. 
• THD and PF: dual display allows readings to be displayed along with Total Harmonic Distortion (THD) or Power Factor (PF). 
• Peak value: the peak value of the waveform or crest factor can be displayed. 
• MAX/MIN/HOLD mode: displays maximum, minimum or average measured value.

Sizes and Dimensions:

• Dimensions (w x h x l): 60 x 43 x 190 mm
• Mass (without accessories): 255 g

About Metrel

Metrel was established in 1957 as a factory for the production of electrical measuring instruments and components for the domestic market and grew from there to become one of world’s leading manufacturers of measuring and testing equipment. They are one of the few companies in the industry that develops and manufactures products at a single location, starting with design and ending with final assembly, quality control and calibration.