Chauvin Arnoux PEL106 Energy Logger P01157165

The PEL106 power logger measures and records all the useful data for energy consumption diagnostics. The PEL106 can be used without cutting off the main power supply.

The PEL104 Energy Logger is also available with included IP67 current clamps, please make your selection from the drop-down menu above.

PEL106 Comes Supplied With:

• 1 bag for accessories
• 5 x IP67 voltage cables
• 5 x lockable crocodile clips
• 1 set of rings/inserts
• PC software (PEL Transfer)
• 1 SD card
• 1 SD -USB adapter
• 1 USB cable
• PC PEL TRANSFER software & user’s manual to download from the website
• 1 quick start guide.
  
  

PEL106 Highlights:

• IP67 all-terrain casing resistant to shock, UV light, and high temperatures
• Communication via Wifi, 3G-UMTS/GPRS, LAN (Ethernet), Bluetooth and USB
• Self-powered via its voltage inputs up to 1,000 V
• Continuous recording with an interval of 200 ms between measurements
• Measurements as per the IEEE 1459 standard
• 4 voltage inputs & 4 current inputs
• Ideal for installation on electricity poles
  
  

PEL Series Applications:

• Ideal for all types of electrical cabinets and Low Voltage installations
• Implementation without cutting off the mains power supply
• Recording duration up to several months or years
• Breakdown of energy losses
• Characterization of electric motors
  
  

Key Features:

The PEL10x power and energy loggers perform the following measurements:

• RMS and DC measurements with 128 samples/cycle – simultaneously on each phase
• AC and/or DC voltages up to 1,000 V
• Analogue measurements
• Measurements on motors
• Self-powering via the phase
• Current up to 10 kA AC or 5 kA DC (depending on the current sensor).
• The PEL100 models offer a wider measurement range by using voltage and current ratios (up to 650,000 V / 25,000 A)
• Power values from 10 W/var/VA to 10 GW/Gvar/GVA
• Energy values up to 4 EWh / 4 EVAh / 4 Evarh & total energy (4 quadrants)
• Breakdown of energy losses
• Characterization of electric motors
• Phase data: cos φ, tan Φ, power factor (PF)
• Crest factor 
• THD calculation for currents and voltages 
• Harmonics up to the 50th order for currents and voltages 
• DC, 50 Hz, 60 Hz, and 400 Hz measurements
• Recording of the measurements and calculation results on the SD card
• Automatic recognition of the type of sensors connected
• Numerous network types supported: split-phase, three-phase with or without neutral, etc.
• Communications: USB, Bluetooth, Ethernet, Wifi, GSM 3G, GPRS
• Software for data transfer, real-time communication with a PC and report generation
  
  

Ergonomics

Rugged thanks to its IP67 all-terrain casing, the PEL106 can be transported anywhere. It is equipped with 4 voltage channels and 4 current channels.

No more battery problems: this logger is self-powered directly via the phase.
The LCD screen with backlighting and a quadruple digital display is particularly easy to read. The PEL 106 is equipped with an SD/SD-HC card for backup of the data from several months or even years.

Measurements

Suitable for all types of electrical networks, the PEL106 automatically recognizes the sensors connected. It measures voltage up 1,000 VAC/VDC and current up to 10 kVAC / 5 kVDC. Its wide measurement ranges enable it to record power values up to 10 GW/Gvar/GVA, and energy up to 4 EWh/EVAh/Evarh.
It is equipped with an Alarm mode. The user can define limits and a list of events is recorded.

Analogue measurements

When used with remote L452 loggers, the PEL106 can recording external parameters such as the temperature, pressure, engine torque, etc., and thus refine the analysis if you are troubleshooting malfunctions, for example. This function on the PEL106 is ideal for applications involving new energies such as wind (electrical energy linked to the strength of the wind).

Ultra-communicating

The PEL106 is equipped with multiple communication modes: USB, Ethernet, Bluetooth, Wifi and 3G/GPRS. The new 3G/GPRS mode allows users to insert a SIM card in the PEL for remote connection via a GSM. When an alarm is triggered, users can automatically receive an email alert.
When access to the PEL106 is complex due to protective measures on secure IT networks, the measurements can be viewed via an IRD server.

Software

The PEL Transfer software can be used to analyse the data recorded with the PEL100 models. On the basis of the power measurement campaigns performed, the software automatically provides a breakdown of the losses detected.
New: the software directly calculates the cost of the power consumed and gives the result in the local currency selected.
The DATAVIEW software platform can be used to generate reports. Users can set alarm thresholds on the various measurements made in order to obtain a customized measurement report.

Additional specifications:

Acquisition interval from 200ms
Voltages, currents
Active, apparent, and reactive power values
Phase: cos phi, tan PHI, PF
THD Harmonics
IP67 closed, IP54 open

ANDROID

In the field, the dedicated ANDROID application can be used to check that the PEL is operating correctly and to modify its configuration. This function enables measurements for applications on motors: rotation speed, torque, and engine efficiency. No more need to add specific sensors to monitor a motor's behavior in real time.

Optional IP67 Current Clamps:

The PEL106 comes as standard without the additional current clamps, these can be added for a reduced cost via the drop-down menu above.

Software: 

Dataview           

*Purchase the Chauvin Arnoux PEL106 Energy Logger and add the Dataview software to your basket by selecting in the menu above for a discounted price.

The PEL Transfer software can be used to analyse the data recorded with the PEL100 models. On the basis of the power measurement campaigns performed, the software automatically decomposes the losses detected.
New: the software directly calculates the cost of the power consumed and gives the result in the local currency selected.
The DATAVIEW software platform can be used to generate reports. Users can set alarm thresholds on the various measurements made in order to obtain a customized measurement report.

The DataView® software is an essential tool for configuring and performing measurements, viewing data in real time, recovering recorded data and creating standard or customized measurement reports.

It provides a single software platform for operating most Chauvin Arnoux products, including:

• QualiStar C.A 8331, C.A 8333, C.A 8336 and C.A 8436 power analysers
• C.A 8220 and C.A 8230 power controllers
• PEL102, PEL103 & PEL105 power and energy loggers
• C.A 6470N, C.A 6471 and C.A 6472 earth testers
• C.A 6543, C.A 6547, C.A 6549, C.A 6550, C.A 6555, C.A 6526, C.A 6532 and C.A 6534 insulation testers
• F407 and F607 multimeter clamps
• All the SIMPLE LOGGER 2 models
• C.A 6417 earth clamps
• C.A 6116N C.A 6117 multi-function installation testers
• DTR8510 ratiometer
• C.A 1821, C.A 1822, C.A 1823 thermometers
• C.A 1246 thermo-hygrometer
• C.A 1227 thermo-anemometer
• C.A 1110 Lightmeter
• CA 10101 pHmeter
• CA 10141 conductivity meter

The simple-to-use DataView® software automatically recognizes the instrument connected to the PC and gives the user direct access to the data recorded in the instrument, its configuration and the real-time data.

DATAView® automatically generates measurement reports or creates new customized reports on request.

This tool also offers a large number of additional functions for greater user comfort or for more detailed analysis: a zoom on the graphs to analyse certain parts more closely, display of various recorded parameters on request, export of stored data into Excel, linking and integration of objects (OLE), etc.

DataView can be used to automatically link the address details of customers, work sites, etc., extracted from a database, to the measurement reports.

The instruments are connected to the PC via USB, RS232, WiFi or Bluetooth, depending on the model.

The following minimum configuration is required:

Windows 7/8/10 (32/64 bit)
1GB of RAM for Windows 7/8/10 (32 bit)
2GB of RAM for Windows 7/8/10 (64 bit)
80MB space on hard disk (200MB recommended)

PEL Transfer

isswww and Chauvin Arnoux

The Chauvin Arnoux Group of companies, incorporating the Metrix and Multimetrix brands are synonymous with the design and production of the finest quality products for the electrical testing industry, covering a diverse sector of the market for over 100 years. From their awarded Digiflex current sensors, universal testers, multimeters, network and power analysers, right up to laboratory instrumentation and beyond.

ISSWWW and Chauvin Arnoux have enjoyed a close working partnership for many years and we supply many of their products to trade and industry the world over.

Bank/Public Holidays

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

• Zones A & B  - Mainland delivery rates apply. 
• Zone C - Scottish Highlands (Charges are calculated at the checkout).
• Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
• Zone E - Northern Ireland (Charges are calculated at the checkout).
• Zone F - Republic of Ireland (Charges are calculated at the checkout).
  
  

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA