Metrel MI3121H SMARTEC 2.5kV Insulation Continuity Tester
Metrel MI 3121H Specification | ||
Insulation Resistance | ||
Insulation resistance (test voltages 100 VDC and 250 VDC) Measuring range according to EN 61557 is 0.15 MΩ ... 999.9 MΩ |
||
Measuring Range | Resolution (MΩ) | Accuracy |
0.00 ... 19.99 | 0.01 | ±(5 % of reading + 3 digits) |
20.0 ... 199.9 | 0.1 | ±10 % of reading |
200 ... 999 | 1 | ±20 % of reading |
Insulation resistance (test voltages 500 VDC, 1000 VDC and 2500 VDC) Measuring range according to EN61557 is 0.15 MΩ ... 100 GΩ |
||
0.00 MΩ ... 19.99 MΩ | 0.01 | ±(5 % of reading + 3 digits) |
20.0 MΩ ... 199.9 MΩ | 0.1 | ±5 % of reading |
200 MΩ ... 999 MΩ | 1 | ±5 % of reading |
1.00 GΩ ... 4.99 GΩ | 10 | ±10 % of reading |
5.00 GΩ ... 19.99 GΩ | 10 | ±20 % of reading |
20.0 GΩ ... 99.9 GΩ | 100 | ±20 % of reading |
Measuring Range | Resolution (V) | Accuracy |
0 V ... 1999 V | 1 | ±(3 % of reading + 3 digits) |
2.00 kV ... 3.00 kV | 10 | ±3 % of reading |
Dielectric absorption ratio DAR, Polarization index PI | ||
Measuring range | Resolution | Accuracy |
0.01 ... 9.99 | 0.01 | ±(5 % of reading + 2 digits) |
10.0 ... 100.0 | 0.1 | ±5 % of reading |
Continuity (200 mA) | ||
Measuring range according to EN61557 is 0.16 Ω ... 1999 Ω | ||
Measuring range (Ω) | Resolution (Ω) | Accuracy |
0.00 ... 19.99 | 0.01 | ±(3 % of reading + 3 digits) |
20.0 ... 199.9 | 0.1 | ±5 % of reading |
200 ... 1999 | 1 | ±10 % of reading |
Open-circuit voltage | 6.5 VDC ... 9 VDC | |
Measuring current | min. 200 mA into load resistance of 2 Ω | |
Test lead compensation | up to 5 Ω | |
Automatic polarity reversal of the test voltage. | ||
Continuity (7 mA) | ||
Measuring range (Ω) | Resolution (Ω) | Accuracy |
0.0 ... 19.9 | 0.1 | ±(5 % of reading + 3 digits) |
20 ... 1999 | 1 | ±10 % of reading |
Open-circuit voltage | 6.5 VDC ... 9 VDC | |
Short-circuit current | max. 8.5 mA | |
Test lead compensation | up to 5 Ω | |
Voltage | ||
Measuring range (V) | Resolution (V) | Accuracy |
0.00 ... 9.99 | 0.01 | ±(3 % of reading + 3 digits) |
10.0 ... 99.9 | 0.1 | ±(3 % of reading + 3 digits) |
100 ... 550 | 1 | ±(3 % of reading + 3 digits) |
Result type | True r.m.s. (TRMS) | |
Nominal frequency range | 0 Hz, 15 Hz ... 500 Hz | |
Frequency | ||
Measuring range (Hz | Resolution (Hz) | Accuracy |
0.00 ... 19.99 | 0.01 | ±(0.2 % of reading + 1 digit) |
20.0 ... 199.9 | 0.1 | ±(0.2 % of reading + 1 digit) |
200 ... 500 | 1 | ±(0.2 % of reading + 1 digit) |
Nominal voltage range | 10 V ... 550 V | |
General Data | ||
Power supply: | 6 x 1.5 V batteries or rechargeable batteries, size AA | |
Overvoltage category | CAT III / 600 V; CAT IV / 300 V | |
Protection classification | double insulation | |
Pollution degree | 2 | |
Protection degree | IP 40 | |
Display | custom liquid crystal display with backlight | |
Memory | 1900 measurements | |
Dimensions (w x h x d | 14 cm x 8 cm x 23 cm | |
Weight (without batteries) | 0.85 kg |
Description
Metrel MI 3121H SMARTEC 2.5kV Insulation Continuity Tester
The MI 3121H Smartec 2,5 kV Insulation / Continuity is the portable measuring instrument for complete diagnostic testing of insulation and continuity measurements. Due to insulation resistance measurement with the test voltages up to 2.5 kV (measuring range is up to 100 GΩ) and calculation of PI and DAR indexes the instrument is suited for testing insulation of cable lines, current and voltage transformers, electric motors, etc.
Due to configurable limits the instrument enables PASS / FAIL evaluation of test results which is accompanied with bright green or red light of LEDs. Additional features include magnetic holder for fixing the tester on the metal surface and built-in charger. The MI 3121H is compatible with EuroLink PRO software which enables downloading and analysis of test results and creation of professional test reports.
MI 3121H (Standard Set) Comes Supplied With:
- Instrument Smartec Insulation / Continuity
- Soft hand strap
- Test lead, 2 x 1.5 m
- Test probe, 2 pcs (black, red)
- Crocodile clip, 2 pcs (black, red)
- Power supply adapter + 6 NiMH rechargeable batteries, type AA
- Instruction manual on CD
- Short instruction manual
- Handbook on CD
- Calibration certificate
Key Features:
- High measuring range: up to 100 GΩ with test voltage from 100 to 2500 V.
- Insulation diagnostics: PI and DAR calculation for determining if the insulation damaged or contaminated.
- Guard test terminal: for elimination of potential surface leakage currents.
- Polarity swap: automatic polarity reversal on continuity test.
- Analogue scale: measuring results are displayed in numeric and analogue representation.
- Custom limits: if limits are set on insulation or continuity function then large green and red lights of the LEDs will indicate a PASS or FAIL evaluation of test result.
- Safe: suited for testing on CAT IV installations.
- Built-in charger & rechargeable batteries: instrument has a built-in charging circuit and comes complete with a set of rechargeable NiMH batteries. Memory: two level memory structure for saving of test results and
- parameters.
- Downloadable: downloads via RS232 or USB cable directly to the PC with the help of the PC software EuroLink PRO.
- Easy to use: large bright LCD display and large buttons enable easy handling of the instrument (even while wearing gloves).
- Magnetic holder: magnet for fixing instrument on metal surfaces enables hands-free operation.
Measuring Functions:
- Insulation resistance with DC voltage up to 2.5 kV;
- Diagnostic test (PI, DAR calculation);
- Continuity of PE conductors with 200 mA test current and polarity change;
- Continuity of PE conductors with 7 mA test current (continuous measurement) without RCD tripping;
- TRMS voltage and frequency.
Applications:
Electrical Power Systems
- Photovoltaic
- Safety
- Insulation Analysing
Industrial Systems
- LV Installations Safety / Quality
- Machines / Power Loads
- Working Places Health / Safety Care
- Maintenance / Troubleshooting
Buildings Facility Management
- Public areas Safety / Quality
- Fire Safety
Special Installations / Locations
- Construction Sites
- Ships / Boats / Marina Places
Standards Applied:
- VDE 0100
- BS 7671 17th EDITION
- CEI 64.8
- IEC/EN 60364 series
- IEC/EN 60364-6
- IEC/EN 61557 series
- IEC/EN 61557-1
- IEC/EN 61557-2
- IEC/EN 61557-4
- IEC/EN 61557-10
About Metrel
Metrel was established in 1957 as a factory for the production of electrical measuring instruments and components for the domestic market and grew from there to become one of world’s leading manufacturers of measuring and testing equipment. They are one of the few companies in the industry that develops and manufactures products at a single location, starting with design and ending with final assembly, quality control and calibration.
Features & Specification
Key Features | Automatic Polarity Reversal, Comes Complete with NiMH Batteries, PI and DAR Calculation, Range > 100 GΩ, RS232/USB Downloadable, Test CAT IV Installations, Test Voltage 100 to 2500V | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Stock Status | Next Day Delivery (subject to availability) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Manufacturer | Metrel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Short Description |
|
Delivery
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
Service | Price |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA