TPI 196 Digital Multimeter
TPI 196 Digital Multimeter
| DC Volts | Maximum Input: 1000V
Maximum Resolution: 0.0001mV Accuracy: +/-0.05% |
| AC Volts | Maximum Input: 1000V
Maximum Resolution: .001mV Accuracy: +/-0.4% |
| DC Amps | Maximum Input: 1A
Maximum Resolution: 0.0001mA Accuracy: +/-0.5% |
| AC Amps | Maximum Input: 1A
Maximum Resolution: 0.0001mA Accuracy: +/-0.75% |
| Resistance (Ohms) | Maximum Input: 50MΩ
Maximum Resolution: 0.01Ω Accuracy: +/-0.05% |
| Frequency | Maximum Input: 500KHz
Maximum Resolution: 0.01Hz Accuracy: +/-0.05% |
| Capacitance | N/A |
| Inductance | N/A |
| Temperature
(K-Type Thermocouple) |
N/A |
| Continuity | Audible at less than 30Ω |
| Diode | 3V at 1mA maximum output |
| Duty Cycle | N/A |
| True RMS Responding | No |
| Conductance | No |
| Pulse Width | No |
| Data Hold | Yes |
| Min/Max Record | Yes |
| Time Stamp Logging | No |
| Relative Mode | Yes |
| Compare Mode | Yes |
| RS-232 Output | Yes, Optically Isolated |
| Process Loop Output | Yes (0 to 24mA) |
| Sleep Mode / Auto Off | Yes |
| Protective Boot | Yes (standard) |
| Display Type | 50,000 count backlit LCD with dual sub displays and analog bargraph |
| Range Selection | Auto / Manual |
| Operating Temperature | 32°F to 113°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 80% non-condensing |
| Size | 8.3” x 3.7” x 1.9” (210mm x 95mm x 47mm) without boot
8.7” x 4.3” x 2.6 (220mm x 110mm x 65mm) with boot |
| Weight | 1.3lbs (570g) without boot
1.9lbs (850g) with boot |
| Battery Type | 9V Alkaline (NEDA 1604) |
| Battery Life | 50hrs Typical |
| OverInput Category | CAT III 600V |
| Agency Approval | cULus 61010-1, IEC 61010-1 |
| Warranty | Limited Lifetime |
Description
TPI 196 Digital Multimeter
The Triple Display 196 is an innovative new concept in DMM design. The unique display enables you to view more than one event at a time. This eliminates the hassle of switching back and forth to review minimum, maximum or preset comparative values. The meter is also easy to use and built to last.
The DMM 196 is a hand-held autoranging DMM. The backlit LCD can display three readings at one time. In addition to basic function of AC/DC V, AC/DC A, Ohm, Diode test, continuity, Capacitance, Frequency, there is the adaptor function. The DMM 196 also has RS232 output and software for recording information into a PC.
The TPI 196 Is Supplied With:
- 196 Instrument
- Rubber Boot
- Fuse 0.5A
- Fuse 1oA
- Test Lead Set
- 9 Volt Alkaline Battery
- Instruction Manual
Key Features:
- Large size 50000 count display
- 0-24mA output for process controls
- Triple display shows more information than a standard DMM
- 51 segment analogue bar graph shows fast AC fluctuations
- Backlight for use in poor lighting conditions
- Autoranging
- Separate battery/fuse compartment
- Increased safety with silicone rubber 1000V CAT III, CAT IV 600V test leads
- Auto power off when left idle
- Diode and continuity testing
- Test AC/DC voltage to 1000V
- AC/DC current testing to 1A
- Resistance measurements to 50MΩ
- Frequency measurements to 500KHz
Applications:
- View industrial signals such as motor control, UPS, switching power supplies, and PLC controls with 1MHz bandwidth
- Capture noise spikes, glitches, and intermittents with 20 megasamples per second sampling rate
- Full autoranging, True RMS, DMM capabilities
- Measure resistance and test for continuity
- Continually updated display provides a live presentation
About TPI Europe
Since 1997, TPI has been striving to offer the latest technology at the most affordable price to technicians, contractors, engineers and others seeking value-based test and measurement instruments. Our mission is to become the leading independent manufacturer and supplier of low cost high-performance industrial instrumentation.
Headquartered in the heart of the “Silicon Forest” in Beaverton, Oregon, TPI combines innovation, performance, customer service and high-value in products which include: Vibration, Combustion, Pressure (manometers), Temperature, Combustible gas, Digital Multimeters, Clamp Meters, IAQ, specialty test and measurement instruments, and a wide range of accessories.
Features & Specification
| Key Features | Highly Accurate, Tests up to 1000V, Diode Function, Min/Max Functions, Capacitance & Frequency, Data Hold | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | TPI Test Products International | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description | TPI 196 Digital Multimeter
|
Delivery
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA