Beha-Amprobe EV-520-UK Vehicle Charging Station Tester

£690.00

Correlation between vehicle state and CP-signal
Vehicle State	Description	PWM voltage at CP terminal
A	Electric vehicle (EV) not connected	± 12 V 1 kHz
B	Electric vehicle (EV) connected, not ready to charge	+ 9 V / -12 V 1 kHz
C	Electric vehicle (EV) connected, ventilation not required, ready to charge	+ 6 V / -12 V 1 kHz
D	Electric vehicle (EV) connected, ventilation required, ready to charge	+ 3 V / -12 V 1 kHz

Specifications
Functions
PE Pre-Test	Yes, with touch electrode
PP Simulation	open, 13 A, 20 A, 32 A, 63 A
CP States	A, B, C, D
CP Error "E"	on/off
PE Error (Earth fault)	on/off
Outputs (for test purposes only)
Measuring terminal L1, L2, L3, N and PE	Max. 250/430 V, CAT II 300 V, max. 10 A
Mains socket	Max. 250 V, CAT II 300 V, allowed current max. 10 A
CP Signal output terminals	PWM communication protocol, approx. max. ±12 V
General Features
Input voltage	Up to 250 V (single phase system) / up to 430 V (three phase system), 50/60 Hz, max 10 A
EV Connector (EVC-20)	AC charging mode 3, suitable to IEC 62196-2 type 2 socket outlet or fixed cable with vehicle connector (type 2, 7P three-phase)
EV Connector (EVC-13) OPTIONAL	AC charging mode 3, suitable to IEC 62196-2 type 1 or SAE J1772 with vehicle connector (type 1, 5P single-phase)
Mains outlet protection	Fuse T 10 A/250 V, 5×20 mm
Dimensions (W × H × L)	110 × 45 × 220 mm (length without connection cable and connector)
Weight	Approx. 1 kg (Adapter EVA-500-x + EC-connector EVC-20)
IP protection class	IP54
CE directive	Low Voltage Directive LVD 2014/35/EU
Safety	IEC/EN 61010-1:2010 IEC/EN 61010-2-030:2010
EMC	Not applicable
Working temperature range	0 ... +40 °C
Storage temperature range	-10 ... +50 °C
Reference humidity range	10 ... 60 % relative humidity w/o condensation
Working humidity range	10 ... 85 % relative humidity w/o condensation
Pollution degree	2
Protection class	II
Measurement category	CAT II 300 V
Altitude above sea level	2000 m max.

Description

Beha-Amprobe EV-520-UK Test Adapter Kit for Electric Vehicle Charging Stations

Get access to the socket-outlets of a charging station to perform safety and functional tests, while simulate presence of an electrical vehicle
The EV-500 Series Test Adapter Kits are designed to test function and safety of charging stations mode 3 for AC charging. The Adapter Kit allows you to conduct tests in combination with appropriate test instruments like an installation tester (for example the Beha-Amprobe ProInstall Series).

The EV-520 adapter currently unavailable so we cannot offer this as a stand-alone item or in kit form. There is an updated kit form now available here.

EV-520-UK Comes Supplied With:

- EVA-500-UK Test Adapter
- EVC-20 Test Cable for EV charging station type 2 with socket outlet or fixed cable with vehicle connector
- User Manual
- Soft Carrying Bag
- Type of mains outlet socket: UK socket

Functions:

• PE Pre-Test: With this safety feature the PE conductor can be tested for possible presence of dangerous voltage against earth.
• Proximity Pilot (PP) state “Cable Simulation”: With PP State rotary switch the adapter can simulate various current capabilities of charging cables.
• Control Pilot (CP) state “Vehicle Simulation”: With CP State rotary switch selector various charging states can be simulated.
• Simulation of CP error “E”
• Simulation of PE error (Earth fault)

Product information

• Suitable to vehicle charging stations with charging mode 3
• EV-connectors for type 2 and type 1
• Measuring terminals L1, L2, L3, N and PE to connect test device like installation tester to perform safety and functional tests.
• Terminals for CP signal output to check communication between adapter (=simulated electrical vehicle) and charging station.

Product highlights

• Separate phase indication by three LED lamps for easy check if voltage is present.
• Mains socket offering the possibility to connect an external load to check if the electric power meter works and counts in the right manner.
• IP 54 rating - Dust and splashing water protected

Suggested test equipment:

Beha-Amprobe ProInstall-100
Beha-Amprobe ProInstall-200
Fluke 120B Series Industrial ScopeMeter handheld Oscilloscopes

Spares & Accessories (Not Supplied):

EVC-20 Test Cable for EV charging station type 2 with socket outlet or fixed cable with vehicle connector 5022831
EVC-13 Test Cable for EV charging station type 1 with fixed cable and vehicle connector 5008580

ISSWWW and Beha-Amprobe - A Fluke Company

With a combined experience of over 100 years, well-known German brand Beha and US-based Amprobe have a track record to be proud of. Now we have joined forces, and together we are committed to making your job safer, faster and easier than ever. Our expertise is legendary. Almost 70 years ago in 1948, we invented the very first clamp meter, and we haven’t stopped innovating since.
The Amprobe brand has always remained a staple among our stockholding. It's pedigree and price point make the brand a quality offering that rival higher priced brands for comparable technology. You can trust Amprobe, thousands do.From multimeters to voltage detectors, at Beha-Amprobe we constantly improve our designs to provide you with the very best quality tools and support.

Features & Specification

More Information

Key Features

Charging Mode 3 Compatible, Charging Station Functional Testing, Rated IP54, Tests PE PP CP & Error PE & Error, Troubleshooting & Repairs, Case Included

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Amprobe

Short Description

Correlation between vehicle state and CP-signal
Vehicle State	Description	PWM voltage at CP terminal
A	Electric vehicle (EV) not connected	± 12 V 1 kHz
B	Electric vehicle (EV) connected, not ready to charge	+ 9 V / -12 V 1 kHz
C	Electric vehicle (EV) connected, ventilation not required, ready to charge	+ 6 V / -12 V 1 kHz
D	Electric vehicle (EV) connected, ventilation required, ready to charge	+ 3 V / -12 V 1 kHz

Specifications
Functions
PE Pre-Test	Yes, with touch electrode
PP Simulation	open, 13 A, 20 A, 32 A, 63 A
CP States	A, B, C, D
CP Error "E"	on/off
PE Error (Earth fault)	on/off
Outputs (for test purposes only)
Measuring terminal L1, L2, L3, N and PE	Max. 250/430 V, CAT II 300 V, max. 10 A
Mains socket	Max. 250 V, CAT II 300 V, allowed current max. 10 A
CP Signal output terminals	PWM communication protocol, approx. max. ±12 V
General Features
Input voltage	Up to 250 V (single phase system) / up to 430 V (three phase system), 50/60 Hz, max 10 A
EV Connector (EVC-20)	AC charging mode 3, suitable to IEC 62196-2 type 2 socket outlet or fixed cable with vehicle connector (type 2, 7P three-phase)
EV Connector (EVC-13) OPTIONAL	AC charging mode 3, suitable to IEC 62196-2 type 1 or SAE J1772 with vehicle connector (type 1, 5P single-phase)
Mains outlet protection	Fuse T 10 A/250 V, 5×20 mm
Dimensions (W × H × L)	110 × 45 × 220 mm (length without connection cable and connector)
Weight	Approx. 1 kg (Adapter EVA-500-x + EC-connector EVC-20)
IP protection class	IP54
CE directive	Low Voltage Directive LVD 2014/35/EU
Safety	IEC/EN 61010-1:2010 IEC/EN 61010-2-030:2010
EMC	Not applicable
Working temperature range	0 ... +40 °C
Storage temperature range	-10 ... +50 °C
Reference humidity range	10 ... 60 % relative humidity w/o condensation
Working humidity range	10 ... 85 % relative humidity w/o condensation
Pollution degree	2
Protection class	II
Measurement category	CAT II 300 V
Altitude above sea level	2000 m max.

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA