Monitor the environment you live and work in with the EasyLog EL-SIE-6+. Configuration is simple, with no software to install on your PC or Mac – just connect the logger with a USB cable, and use your standard web browser to configure the device for logging. You don’t even need internet access to set up and use the EL-SIE-6+, it really couldn’t be easier.

The logging interval can be set between 10 seconds and 24 hours, with immediate, delayed, triggered or push-to-start logging. Alarms are fully user configurable, with functionality including cumulative alarms, pre-alarms, a delay before alarm triggering, and an alarm hold option, which continues showing the alarm condition even if the reading returns to an acceptable level. The display shows current, maximum and minimum readings, and three coloured LEDs indicate device status at a glance.

Once logging is complete, re-connect to your computer and use your browser to view, analyse and save your data. You can also choose to upload your data to an Easy Log Cloud account, making the data accessible online for powerful graphing, analysis and report generation.

Typical battery life is over 1 year using standard AAA alkaline batteries, and a wall mounting bracket is supplied with the device.

Key Features:

• -18 to +55°C (-0.4 to +131°F) temperature measurement range
• 0 to 100%RH humidity measurement range
• 300 to 1200mbar pressure measurement range
• Stores over 1,000,000 readings (As per spec table)
• No software to install - configure using your normal web browser
• Use with a PC or Mac
• Display shows current, maximum and minimum readings
• Status and alarm indicators
• On-board alarm sounder
• Data can be uploaded to the EasyLog Cloud
  
  

  No Complicated Software:

  All the software needed to configure your EL-SIE-6+, and view and analyse the data it logs, is contained within the product itself. Just connect the logger to your PC or Mac with a USB cable, open any web browser and in the address bar type “http://EasyLog.local”. No internet connection is needed, and you can save this address in your bookmarks or favourites as normal.

   

  The interface is easy to use and allows the following parameters to be configured:

   

  • Logger and channel names
  • Measurement units Logging rate and start mode
  • Up to 16 separate alarms (high/low/pre-alarm/cumulative) with thresholds, delay and hold
  • Display and LED indicator modes

   

  Once the logger is running, you can plug it back into your computer and see the latest data, device status and the event log. You can also choose to stop the logger and change the configuration, or just let it continue logging.
  
  

  About ATP:

  ATP was the brainchild of Graham Clarkson, fuelled by new legislation requirements, Graham had the foresight to begin importing the first few temperature monitoring instruments into the country[Text Wrapping Break]Over nearly 30 years, ATP has grown its product portfolio based on legislative requirements, technological advancement, but most importantly, the need to meet the ever changing requirements of our customers. Our product range now caters for all aspects of test and measurement including manufacturing, health and safety, quality control or even every day commercial and industrial tasks.