Amprobe AMP-330 1000A AC/DC TRMS Industrial Clamp Meter

If you’re looking for a versatile clamp-on amp meter for electrical motor maintenance and HVAC testing in high voltage industrial environments, the AMP-330 Clamp Meter is the best clamp meter for the job. It is the best clamp meter in the AMP-300 Series line including all the features of the AMP-320 plus a work light, peak hold, CAT IV 600 V, CAT III 1000 V safety rating and large 2.0 inch (51 mm) jaw.

AMP-330 1000A AC/DC TRMS Motor Maintenance Clamp Meter

• True-RMS
• Voltage up to 1000 V AC/DC, Current up to 1000 A AC/DC, resistance and frequency
• Low pass filter for variable frequency drives
• Amp-tip function for precise low current measurements down to the tenth of an Amp
• Capacitance measurement for start and run motor capacitors
• A third input terminal for 3-phase motor and phase rotation tests
• DC Microamps output for measurement of flame sensors
• Inrush current measurement for motor start-up monitoring
• Temperature measurement from -40.0 to 752°F (-40.0 to 400°C)
• Non-contact voltage detection
• Audible continuity and diode test
• Data hold, relative zero, MAX/MIN/AVG, peak hold (crest)
• Large LCD backlit display
• Work light
• Accommodates conductors up to 2.0 in (51mm)
• CAT IV 600 V, CAT III 1000 V safety rated

Included Accessories: Banana Plug Type-K Thermocouple, Test Leads, Alligator Clip Set, (2) AAA Batteries (installed), User Manual, Carrying Case

HVAC technicians will find the temperature and capacitance measurements they need plus DC Microamps for testing flame sensors. It also had core motor testing capabilities such as motor rotation, 3-phase sequence testing, and inrush current measurement for motor start-up monitoring. The low pass filter allows you to accurately measure current and voltage on variable frequency drives. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. It also offers a full range of standard multimeter features, including AC/DC current, AC/DC voltage, frequency, True-RMS, non-contact voltage detection, resistance, and continuity.

• Measures AC/DC Current to 1000 A and AC/DC Voltage to 1000 V
• Measures temperature from -40° to 752°F, (-40° to 400°C)
• Measures DC Microamps output to test proper operation of the flame sensor on gas appliances
• Measures capacitance, test diodes, and features a continuity beeper
• Tests 3-phase sequence and motor rotation to ensure proper connection of a motor to a 3-phase system
• Monitors inrush current during motor start-up
• Features True-RMS sensing for accurate voltage measurements in noisy electrical environments
• Amp-Tip function delivers precise low AC current measurements – 0 to 60 A
• Includes a low pass filter to accurately measure voltage and current on variable frequency drives
• Provides resistance and continuity measurement capabilities to verify the quality of electrical connections and the proper operation of motor and transformer coils
• Provides data hold, relative zero, and MAX/MIN/AVG mode for quick analysis
• Maximizes battery life with auto power off and low battery indicator
• Backlit display for easy measurement viewing in bright and dim environments
• CAT IV 600 V, CAT III 1000 V safety rated
• Boasts peak hold and work light
• Accommodates conductors up to 2.0 inches (51mm)
• Includes test leads, batteries (installed), alligator clip set, banana plug K-type thermocouple, carrying case, and user manual

Bank/Public Holidays

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

• Zones A & B  - Mainland delivery rates apply. 
• Zone C - Scottish Highlands (Charges are calculated at the checkout).
• Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
• Zone E - Northern Ireland (Charges are calculated at the checkout).
• Zone F - Republic of Ireland (Charges are calculated at the checkout).
  
  

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA