Toggle Nav
Search

Amprobe ACD-10 Plus 600A AC Clamp Meter

£75.90
Be the first to review this product
AC Voltage 4.000 V, 40.00 V, 400.0 V, 600 V
DC Voltage 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
AC Current 40.00 A, 400.0 A, 600 A
Resistance 400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩ
Capacitance 500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF
Frequency 40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads
Accomodates Conductors up to 1.0''(25 mm) in diameter
Display 3-3/4 digits 4000 counts LCD display
Update Rate 3 per second nominal
Polarity Automatic
Operating Temperature °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude Operating below 2000m; Indoor use
Storage Temperature -20 °C to 60 °C, < 80% RH (with battery removed)
Temperature Coefficient nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low Battery Below approx. 2.4V
Power Supply 3V coin battery IEC-CR2032
Power Consumption 2.8 mA typical except that 3.3 mA typical for ACA function
APO Timing Idle for 30 minutes
APO Consumption 5 µA typical
Jaw Opening and Conductor Diameter max 26 mm
Special Features 30ms Max Hold; Data Hold; Relative Zero mode
|

Description

Amprobe ACD-10 PLUS AC Clamp Meter

Amprobe's ACD-10 is also a fully functional digital multimeter; connect up your test leads and you'll also be able to measure AC/DC voltage to 600V, resistance to 40MΩ, capacitance to 3000μF and also perform continuity, frequency and inrush current measurements
Built with thin jaws, Amprobe's ACD-10 is excellent for clamping around smaller wires, or for getting a secure connection around wires in cramped environments

The ACD-10 PLUS Comes Supplied With:

  • Amprobe AC-10 PLUS Clamp Multimeter
  • Test leads
  • Battery (Installed)
  • Soft Carrying Pouch
  • User Manual

 

Key Features

  • Extra thin jaws with maximum diameter of 25mm, ideal for measuring in cramped locations
  • AC and DC voltage measurements to 600V
  • AC current measurements up to 600A
  • Resistance measurements to 40MΩ
  • Continuity buzzer
  • Capacitance measurements to 3000μF
  • Frequency measurements
  • In rush current
  • Data hold
  • MAX hold
  • Autoranging clamp meter


Amprobe’s ACD-10 PLUS meter offers thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 25 mm. It also measures Capacitance and Frequency. Frequency is measured by either jaws or test leads. Very versatile clamp multimeter. Additional functions of this clamp meter include a HOLD function (stores current value shown on the screen), MAX function and auto-ranging. The jaws are just 10mm  thick and can be attached to conductors with maximum diameter of 25mm

ISSWWW and Beha-Amprobe - A Fluke Company

With a combined experience of over 100 years, well-known German brand Beha and US-based Amprobe have a track record to be proud of. Now we have joined forces, and together we are committed to making your job safer, faster and easier than ever. Our expertise is legendary. Almost 70 years ago in 1948, we invented the very first clamp meter, and we haven’t stopped innovating since.
The Amprobe brand has always remained a staple among our stockholding. It's pedigree and price point make the brand a quality offering that rival higher priced brands for comparable technology. You can trust Amprobe, thousands do.From multimeters to voltage detectors, at Beha-Amprobe we constantly improve our designs to provide you with the very best quality tools and support.

Features & Specification

More Information
Manufacturer Amprobe
Short Description
AC Voltage 4.000 V, 40.00 V, 400.0 V, 600 V
DC Voltage 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
AC Current 40.00 A, 400.0 A, 600 A
Resistance 400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩ
Capacitance 500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF
Frequency 40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads
Accomodates Conductors up to 1.0''(25 mm) in diameter
Display 3-3/4 digits 4000 counts LCD display
Update Rate 3 per second nominal
Polarity Automatic
Operating Temperature °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude Operating below 2000m; Indoor use
Storage Temperature -20 °C to 60 °C, < 80% RH (with battery removed)
Temperature Coefficient nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low Battery Below approx. 2.4V
Power Supply 3V coin battery IEC-CR2032
Power Consumption 2.8 mA typical except that 3.3 mA typical for ACA function
APO Timing Idle for 30 minutes
APO Consumption 5 µA typical
Jaw Opening and Conductor Diameter max 26 mm
Special Features 30ms Max Hold; Data Hold; Relative Zero mode
Product Stock Status Next Day Delivery (subject to availability)

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration 

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT £4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays)  – UK Mainland only - Zones A & B  - ANY order value - Order by 2:00pm £7.75
Saturday ANYTIME Delivery - Order by 2:00pm £9.95
 

 

 

 

 

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

  • Zones A & B  - Mainland delivery rates apply. 
  • Zone C - Scottish Highlands (Charges are calculated at the checkout).
  • Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
  • Zone E - Northern Ireland (Charges are calculated at the checkout).
  • Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export 

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA