Beha-Amprobe 35XP-A Digital Multimeter

£118.74

Amprobe 35XP-A Digital Multimeter
General Specs
Display	3-3/4 digit liquid crystal display (LCD) with maximum reading of 3999
Polarity	Automatic, positive implied, negative polarity indication
Overrange	(OL) or (-OL) is displayed
Zero	Automatic
Low Battery Indication	Symbol displayed when battery voltage drops below operating level
Auto Power Off	Approx 10 minutes
Measurement Rate	2 times per second, nominal
Operating Environment	0 to 50°C at <70% RH
Storage Temperature	-20 to 60°C, 0 to 80% RH with battery removed from meter
Accuracy	Stated accuracy at 23°C ± 5°C <75% relative humidity
Temperature Coefficient	0.1 x (specified accuracy) per °C (0 to 18°C, 28°C to 50°C)
Altitude	2000m
Power	Single standard 9 volt battery, BEDA 1604, JIS 006P, IEC 6F22
Battery Life	150 hours typical with carbon-zinc, 300 hours typical with alkaline
Dimensions (H x W x D)	155mm x 72mm x 32mm
Weight	Approx 400g including battery
Warranty	One year
Technical Specs
Measurement Type	Range	Accuracy
Voltage
DC Volts	400mV, 4V, 40V, 400V, 1000V	± (0.5 % rdg + 1 dgt)
AC Volts (45Hz to 500Hz)	400mV (45 to 100Hz) 4V, 40V, 400V, 750V	±(1.5% rdg + 5 dgts) ±(1.5% rdg + 5 dgts)
Resolution	100μV	-
Input Impedance	400mV: >100MΩ; 4V: 10MΩ; 40V to 1000V: 9.1MΩ	-
Overload Protection	1000V DC or 750V AC RMS	-
Current		-
DC Current	400μA, 4000μA, 40mA, 400mA 2A	±(1.0 % rdg + 2 dgt) ± (2.0% + 3 dgts)
AC Current	400μA, 4000μA, 40mA, 400mA 2A	± (1.5% rdg + 5 dgts) ± (2.5% rdg + 3 dgts)
Resolution	0.1μA	-
Input Protection	2A/1000V fast blow ceramic fuse 3.6mm x 32mm on A input	-
Burden Voltage	500mV max (2V on 4mA, 400mA ranges)	-
Resistance	400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ 40MΩ	±(1.0% rdg + 4 dgts) ± (2.0% rdg + 5 dgts)
Resolution	100mΩ
Open Circuit Voltage	-0.45V DC typical (-1.2V DC on 400Ω range)	-
Overload Protection	1000V DC or 750V AC RMS	-
Capacitance	4nF, 40nF, 400nF, 4μF 40μF, 400μF 4mF	± (5.0% rdg + 30 dgts) ± (5.0% rdg + 5 dgts) ± (5.0% rdg + 15 dgts)
Resolution	1pF	-
Test Voltage	<1V	-
Test Frequency	1.3Hz on 4nF to 40μF ranges, 0.7Hz on 400μF, 4mF ranges	-
Input Protection	2A/1000V fast blow ceramic fuse 6.3mm x 32mm on A input	-
Temperature	400 °C, 1000 °C, 400 °F, 1832 °F -20 °C to 10 °C 10 °C to 200 °C 200 °C to 1000 °C -4 °F to 50 °F 50 °F to 400 °F 400 °F to 1832 °F	- ± (2.0 % rdg + 4 °C) ± (1.0 % rdg + 3 °C) ± (3.0 % rdg + 2 °C) ± (2.0 % rdg + 8 °F) ± (1.0 % rdg + 6 °F) ± (3.0 % rdg + 4 °F)
Resolution	0.1°C, 0.1°F	-
Overload Protection	1000V DC or 750V AC RMS 1000V 600V 300V	-
Frequency	4k, 40k, 400k, 1M	±0.1% rdg + 3 dgts
Resolution	1Hz	-
Sensitivity	10Hz to 1MHz: 2.5V rms	-
Minimum Pulse Width	<35ns	-
Duty Cycle Limits	>30 % and <70 %	-
Overload Protection	1000V DC or 750V AC RMS	-
Continuity		-
Audible Indication	Less than 25Ω	-
Response Time	100ms	-
Overload Protection	1000V DC or 750V AC RMS	-
Diode Test		-
Test Current	1.2mA (approx)	± (1.5% + 3 dgts)
Resolution	1mV	-
Open Circuit Voltage	3.0 DC typical	-
Overload Protection	1000V DC or 750V AC RMS	-
Non-Contact Voltage Indicator	If voltage between 70V and 600V is detected beeper chirps and bright red LED switches on	-

Description

Beha-Amprobe 35XP-A Digital Multimeter

The Beha-Amprobe 35XP-A Multimeter is ideally suited to general electricians, plant maintenance and HVAC engineers.
It can measure up to 750V AC, 1000V DC and current to 2A. It comes complete with a thermocouple and K type probe allowing temperature measurement to 1000°C.
It will also measure resistance to 40MΩ and capacitance to 400μF. The included Magne-grip holster also allows you to temporarily fix the meter to a metallic surface to aid hands free operation.

Beha-Amprobe 35XP-A Comes Supplied With:

TL245A Test Leads
TP255A K-Type Thermocouple
XR-TA Temperature Adapter
2A/1000V Fuse
9V Battery (installed in meter)
Magne-Grip Holster + Magnetic Hanging Strap
User Manual

Key Features:

• Voltage, current and resistance measurement
• Capacitance and frequency measurement
• Diode and acoustic continuity test
• Temperature measurement
• Measurement of ionisation currents in heating systems
• Automatic and manual range selection
• Integrated measurement memory (data hold)
• Shock-proof and impact-resistant thanks to
standard protective holster
• Auto power-off
• Non-contact voltage detection (NCV)

Features & Specification

More Information

Key Features

Measures resistance, Measures frequency, Measures capacitance, AC/DC voltage, AC/DC current, Temperature function, Auto and Manual Range, Data Hold Min/Max

Product Stock Status

Next Day Delivery (subject to availability)

Manufacturer

Amprobe

Short Description

Amprobe 35XP-A Digital Multimeter
General Specs
Display	3-3/4 digit liquid crystal display (LCD) with maximum reading of 3999
Polarity	Automatic, positive implied, negative polarity indication
Overrange	(OL) or (-OL) is displayed
Zero	Automatic
Low Battery Indication	Symbol displayed when battery voltage drops below operating level
Auto Power Off	Approx 10 minutes
Measurement Rate	2 times per second, nominal
Operating Environment	0 to 50°C at <70% RH
Storage Temperature	-20 to 60°C, 0 to 80% RH with battery removed from meter
Accuracy	Stated accuracy at 23°C ± 5°C <75% relative humidity
Temperature Coefficient	0.1 x (specified accuracy) per °C (0 to 18°C, 28°C to 50°C)
Altitude	2000m
Power	Single standard 9 volt battery, BEDA 1604, JIS 006P, IEC 6F22
Battery Life	150 hours typical with carbon-zinc, 300 hours typical with alkaline
Dimensions (H x W x D)	155mm x 72mm x 32mm
Weight	Approx 400g including battery
Warranty	One year
Technical Specs
Measurement Type	Range	Accuracy
Voltage
DC Volts	400mV, 4V, 40V, 400V, 1000V	± (0.5 % rdg + 1 dgt)
AC Volts (45Hz to 500Hz)	400mV (45 to 100Hz) 4V, 40V, 400V, 750V	±(1.5% rdg + 5 dgts) ±(1.5% rdg + 5 dgts)
Resolution	100μV	-
Input Impedance	400mV: >100MΩ; 4V: 10MΩ; 40V to 1000V: 9.1MΩ	-
Overload Protection	1000V DC or 750V AC RMS	-
Current		-
DC Current	400μA, 4000μA, 40mA, 400mA 2A	±(1.0 % rdg + 2 dgt) ± (2.0% + 3 dgts)
AC Current	400μA, 4000μA, 40mA, 400mA 2A	± (1.5% rdg + 5 dgts) ± (2.5% rdg + 3 dgts)
Resolution	0.1μA	-
Input Protection	2A/1000V fast blow ceramic fuse 3.6mm x 32mm on A input	-
Burden Voltage	500mV max (2V on 4mA, 400mA ranges)	-
Resistance	400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ 40MΩ	±(1.0% rdg + 4 dgts) ± (2.0% rdg + 5 dgts)
Resolution	100mΩ
Open Circuit Voltage	-0.45V DC typical (-1.2V DC on 400Ω range)	-
Overload Protection	1000V DC or 750V AC RMS	-
Capacitance	4nF, 40nF, 400nF, 4μF 40μF, 400μF 4mF	± (5.0% rdg + 30 dgts) ± (5.0% rdg + 5 dgts) ± (5.0% rdg + 15 dgts)
Resolution	1pF	-
Test Voltage	<1V	-
Test Frequency	1.3Hz on 4nF to 40μF ranges, 0.7Hz on 400μF, 4mF ranges	-
Input Protection	2A/1000V fast blow ceramic fuse 6.3mm x 32mm on A input	-
Temperature	400 °C, 1000 °C, 400 °F, 1832 °F -20 °C to 10 °C 10 °C to 200 °C 200 °C to 1000 °C -4 °F to 50 °F 50 °F to 400 °F 400 °F to 1832 °F	- ± (2.0 % rdg + 4 °C) ± (1.0 % rdg + 3 °C) ± (3.0 % rdg + 2 °C) ± (2.0 % rdg + 8 °F) ± (1.0 % rdg + 6 °F) ± (3.0 % rdg + 4 °F)
Resolution	0.1°C, 0.1°F	-
Overload Protection	1000V DC or 750V AC RMS 1000V 600V 300V	-
Frequency	4k, 40k, 400k, 1M	±0.1% rdg + 3 dgts
Resolution	1Hz	-
Sensitivity	10Hz to 1MHz: 2.5V rms	-
Minimum Pulse Width	<35ns	-
Duty Cycle Limits	>30 % and <70 %	-
Overload Protection	1000V DC or 750V AC RMS	-
Continuity		-
Audible Indication	Less than 25Ω	-
Response Time	100ms	-
Overload Protection	1000V DC or 750V AC RMS	-
Diode Test		-
Test Current	1.2mA (approx)	± (1.5% + 3 dgts)
Resolution	1mV	-
Open Circuit Voltage	3.0 DC typical	-
Overload Protection	1000V DC or 750V AC RMS	-
Non-Contact Voltage Indicator	If voltage between 70V and 600V is detected beeper chirps and bright red LED switches on	-

Delivery

Updated January 2024

Please note, our cut-off time is 2:00pm

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.
Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT	£4.95
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm	£7.75
Saturday ANYTIME Delivery - Order by 2:00pm	£9.95

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA