TPI DC580 Airflow Meter Hot-Wire and Vane Anemometer
- Dual Display With Backlight
- Measures Air Velocity & Temperature
- Connect To TPI App
- Air Flow Probes Included
- ±2 Accuracy
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
TPI DC580 Airflow Meter Hot-Wire and Vane Anemometer
DC580 Airflow Meter Hot-wire & Vane Anemometer. Measure Velocity & Temperature Simultaneously; Record Data with TPI Android & iOS Smart Phone Apps; Measure CMM without a hood!
The TPI DC580 Anemometer is a smart air flow meter that can measure velocity through the supplied hot-wire and vane probes. The hotwire probe will measure air flow velocity from 0.2m/s to 20m/s with 0.01m/s resolution and accuracy of ±5%. The vane probe, meanwhile, will measure air flow speed from 0.4m/s to 25m/s with ±2% accuracy. It is also possible to measure air temperature from -20˚C to 60˚C and calculate volume flow using the anemometer.
Key Features:
- Measure air velocity and temperature simultaneously
- Measure cubic meters per minute (CMM) without an air-balance hood
- Field replaceable smart hot wire and vane probes
- Communicate with Android & iOS Smart Phones using Bluetooth LE and TPI App
- Record minimum, maximum & average
- Multiple measuring units: m/s, km/h, ft/min, knots, mile/h
- Rubberized boot with magnets for hands-free operation
- Dual display with backlight
The TPI DC508 has a backlit digital screen which can display up to two parameters concurrently in the user’s preferred units. The anemometer offers minimum, maximum and average value recording whilst data hold will freeze the current value on the screen. The navigation and function buttons make operation very straightforward. Up to 300 results can be saved to the anemometer’s internal memory.
Bluetooth connectivity allows the TPI DC580 to communicate wirelessly with the TPI DC580 App. This app can download saved results from the anemometer to a smart device’s internal memory. Other functions include volume flow calculation when the area of a ventilation outlet is entered and the user can even send results in an e-mail attachment to the client’s e-mail address. It is also possible to save information under a particular customer’s details.
Application:
- Air velocity measurements in HVAC systems
- Air duct analysis to balance commercial and residential HVAC systems
- Fume hoods
- Floor registers
- Exhaust grills
TPI Stream Android App
- Works on Android devices with Bluetooth Enabled TPI 716 & 608BT Models
- Support for Apple devices coming soon……
- Set up your company & engineer details
- Create jobs by reference or customer or address
- Save readings & reports against jobs created
- Reports will be Time & Location Stamped to prove When & Where readings were taken
- Instrument Serial No. visible in app & on reports
- Sign off jobs with customer signature and e-mail multiple reports to multiple e-mail addresses
About TPI Europe
Since 1997, TPI has been striving to offer the latest technology at the most affordable price to technicians, contractors, engineers and others seeking value-based test and measurement instruments. Our mission is to become the leading independent manufacturer and supplier of low cost high-performance industrial instrumentation.
Headquartered in the heart of the “Silicon Forest” in Beaverton, Oregon, TPI combines innovation, performance, customer service and high-value in products which include: Vibration, Combustion, Pressure (manometers), Temperature, Combustible gas, Digital Multimeters, Clamp Meters, IAQ, specialty test and measurement instruments, and a wide range of accessories.
| Key Features | Dual Display With Backlight, Measures Air Velocity & Temperature, Connect To TPI App, Air Flow Probes Included, ±2 Accuracy | ||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | TPI Test Products International | ||||||||||||||||||||||||||||||||||||||||||
| Short Description | TPI DC580 Airflow Meter Hot-Wire and Vane Anemometer
|
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA