The images provided are for illustrative purposes only. Please refer to product description.

Martindale IRC327 Thermal Imaging Camera

The new IRC thermal imaging cameras from Martindale Electric represent a breakthrough in thermal imaging affordability.

0 Review(s) Add Your Review

Next Day Delivery (subject to availability)

£238.99 exc. VAT £286.79 inc. VAT £358.80 inc. VAT

128x160 Pixels
Auto Focus
Batteries Supplied
Built-in Laser Pointer
Thermal Range -30 °C to +650 °C
UV Leak Detection
Advanced level camera

Add Certificate Of Calibration?

Required Fields

Qty:

Confirm Availability
Calibration Info

Information on calibration of newly purchased equipment and what it means to you.

Calibration and it's certification comes in varying forms on new equipment and in this section we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as a end of line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your companies name on and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within it's intended application, it has no traceable certificate or constitute any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

FREE personalised traceable calibration certificate

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your companies details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a FREE personalised traceable calibration certificate. This equipment is supplied by the manufacturer with a basic statement of conformity. We have upgraded the equipment to include a full personalised traceable calibration certificate for you in our laboratory at our expense.
You are advised to renew your calibration annually.

Where offered this can be identified by the logo below:
Call Me Back
Seen it cheaper? Click Here

Description
Features & Specification
Resources
Delivery (updated)

Martindale IRC327 Thermal Imaging Camera

The new IRC thermal imaging cameras from Martindale Electric represent a breakthrough in thermal imaging affordability

The new IRC thermal imaging cameras from Martindale Electric represent a breakthrough in affordable thermal imaging for troubleshooting of electrical and mechanical installations.

The combination of real time thermal imaging with spot infrared temperature measurement, packaged in a rugged pistol design, make it the ideal tool for electricians and maintenance teams needing fast on-site diagnostics. The cameras show hot and cold spots at a glance and accurately measure spot temperatures of hot and hard to reach surfaces.

Martindale IRC327 Comes Supplied With:

2GB Micro SD Card
Batteries

Key Features:

Combined thermal imager and spot infrared thermometer
Extended temperature range -30° to 650°C
Easy to use single button image capture
Blended image for simple and fast hotspot identification
Rugged pistol grip design for on-site use
Built-in LED torch, UV leak detector and laser pointer
SD card memory and download for image storage and reporting
Simple setting of emissivity and choice of colour palettes

The thermal images, displayed on the 4.5cm colour display, combine colour temperature gradients and component outlines to quickly troubleshoot problems, be it poor electrical connections, phase unbalance or faulty motors and bearings. The IRC327 includes an infrared spot thermometer making it easy to accurately and safely measure the temperature of hot and hard to reach surfaces without contact. The extended temperature range makes it suitable for measurements from -30°C to +650°C.

The advanced design of IRC327 allows simple capture and storage of the image to the SD card for evaluation and reporting and images can be downloaded directly via the micro USB port. In addition, laser targeting and the 5 LED torch make it easy to get reliable measurements wherever you are working. The built-in lens cover of the IRC327 provides protection for all environments.

The new camera can be used for a wide range of applications from identifying sources of heat loss to reduce energy bills, through to checking the correct functioning of heating and ventilation systems. The point and shoot design is easy to use and enables users to get up and running without the need to navigate complicated menus. The IRC327 allows simple setting of emissivity and choice of colour palettes for enhanced diagnostics.

The IRC327 also includes a simple UV leak detector function which, for example, can be used to reliably detect leaks in cooling and air-conditioning systems when a suitable UV indicator dye is used.

Featuring a lightweight pistol shape design for comfort and easy access to functions, the new thermal imaging cameras from Martindale offer an ideal and affordable solution for busy electricians and maintenance teams to troubleshoot problems quickly and identify potential maintenance issues early.

ISSWWW and Martindale Electric

Founded in 1928 and also owns Edgcumbe Instruments Metrohm® products, as well as the John
Drummond Engineers range of test lamps. They are a British owned company, based in Watford, just 5 minutes from junction 5 of the M1. Their product range helps electricians and maintenance engineers carry out portable appliance testing, check fixed wiring for 17th Edition and Part P testing, safely prove dead, and measure everything from light and sound levels to microwave leakage and power consumption.
We are proud to be able to offer Martindale's products and services and have done so for many years.

Martindale IRC327 Advanced Thermal Camera
Temperature
Temperature range	-30ºC to 650ºC (-22ºF to 1202ºF)
Temperature resolution	0.1ºC (0.2ºF)
Temperature coefficient	±0.1ºC/ºC or ± 0.1%/ºC of reading (whichever is greater)
Repeatability	±1.0ºC (2.0ºF) or ± 8% of reading (whichever is greater)
Response time	<125ms to 95% of reading
Spectral response	8 to 14 microns
Emissivity settings	0.95, 0.80, 0.60, 0.30, or variable from 0.10 to 0.99
Distance spot ratio	30:1
Thermal Imaging Detector
Type	IR-EX™ Technology (Integrated IR Array Sensor with CMOS Sensor)
Imaging resolution	16,384 pixels (128 x 128 pixels)*
Field of view	(H x W): 33º
Upper sense range	650ºC
Thermal imaging sensitivity	150mK
Colour palette	Greyscale, Hot iron, Rainbow * Interpolation pixels
General
Display	4.5cm colour TFT (128 x 160 pixels)
Laser	Laser product class: 2 Rated wavelength: 650nm Beam divergence: 1mrad max. Output power: 1mW max.
Micro SD card	2 GB card fitted, maximum card size 32GB
Power	3 x 1.5V, AA alkaline batteries (IEC LR6, NEDA 15A)
Battery Life	12 hours typical
Auto power off	Settable to 1, 2, 5 or 10 minutes
Low battery indication	The low battery symbol is displayed when the battery voltage drops below the operating level
Dimensions	185 x 54 x 104 mm
Weight	Approx. 300g including batteries
Includes	3 x 1.5V AA batteries, 2GB micro SD card and instructions
Environmental
Operating environment	-10 to 50°C at <70% R.H. 10 to 90% R.H. non-condensing at 30ºC
Storage environment	-20 to 60°C, with batteries removed.
Altitude	Up to 2000m (Operating) Up to 12000m (Storage)
Safety
Conforms to	BS EN 61010-1 Class II, double insulation BS EN 60825-1:2014 for Class 2 Laser products
EMC
Conforms to BS EN 61326-1

Delivery Notices (Updated March 29th 2021)

During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time.
Coupled with manufacturers on reduced output due to more stringent working practices and a global shortage of component parts to supply UK manufacturing, we have taken the decision to temporarily limit our services rather than let our customers down amid these unprecedented circumstances.
We hope you will understand our position on this and we apologize unreservedly for the inconvenience we know it will cause.

Please note that ALL orders placed before 3:00pm are shipped same-day (subject to stock and any additional services required).
The stated transport times above have some scope for adjustment built-in for the Covid-19 situation. Carriers themselves also have their own extended workload and limitations at this time which are unfortunately beyond our control.

Easter 2021

Easter is always a busy time for suppliers and distributors alike, please bear in mind that we will be away from the office from 17:00 Thursday 1st - 08:00 Tuesday 6th April.
This will likely further impact expected lead times on goods arriving and leaving our premises, we advise you to place your order in good time to negate delays as far as possible.
We apologise for the added disruption that this period is likely to bring.

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT - Order by 3:0pm	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT - Order by 3:0pm	£4.75
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 3:0pm	£7.75
Saturday ANYTIME Delivery - Order by 3:0pm	£9.95

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable.
E&OA

Martindale IRC327 Thermal Imaging Camera

The new IRC thermal imaging cameras from Martindale Electric represent a breakthrough in thermal imaging affordability.

Martindale IRC327 Thermal Imaging Camera

The new IRC thermal imaging cameras from Martindale Electric represent a breakthrough in thermal imaging affordability

Martindale IRC327 Comes Supplied With:

Key Features:

ISSWWW and Martindale Electric