Advanced Screening

The images provided are for illustrative purposes only. Please refer to product description.

HIKVISION ISD-SMG318LT-F Walk Through Temperature Scanner

ISD-SMG318LT-F walk-through thermal imaging and metal detector. Allowing controlled mass subject screening ideally suited to high traffic areas such as shopping malls, airports and sports centres and networkable to your security or surveillance centre.

0 Review(s) Add Your Review

Next Day Delivery (subject to availability)

£8,276.00 excluding VAT £9,931.20 including VAT @ 20%

18 Area Object Position Identification
AI Multi-target Face Detection
Definable Audio Alarms
Mass Subject Screening
Metal Detection
Networkable
Professional level camera

Qty:

Confirm Availability
Calibration Info

Information on calibration of newly purchased equipment and what it means to you.

Calibration and it's certification comes in varying forms on new equipment and in this section we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as a end of line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your companies name on and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within it's intended application, it has no traceable certificate or constitute any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

FREE personalised traceable calibration certificate

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your companies details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a FREE personalised traceable calibration certificate. This equipment is supplied by the manufacturer with a basic statement of conformity. We have upgraded the equipment to include a full personalised traceable calibration certificate for you in our laboratory at our expense.
You are advised to renew your calibration annually.

Where offered this can be identified by the logo below:
Call Me Back
Seen it cheaper? Click Here

Description
Features & Specification
Resources
Delivery (updated)

HIKVISION ISD-SMG318LT-F Walk Through Temperature Scanner

Mass subject bodily temperature screening with metal detection for high traffic areas

HIKVISION page banner

ISD-SMG318LT-F walk-through metal detector, adopting the thermal imagery technology, realizes non- contact temperature measurement. Face detection function of the camera makes an accurate positioning of the measurement. The detector also supports metal detection. It is suitable for safety inspection of dangerous goods and is widely used in public occasions and important places, etc. It is recommended to be used indoor with a windless environment.

Thermal Imaging Key Features:

Smart Functions:

Temperature exception detection
Linkage for audible alarm
Linkage of white strobe light alarm

Thermal Imaging Functions:

Uncooled sensor, resolution: 160 x 120
Supports AGC4.0, DDE, and 3DNR
Supports dual-light fusion image
Supports visible light and thermal imaging frame overlay
15 pseudo colours: white, black, red, etc.

Visible Light Functions:

4 MP, 1/2.7 “ CMOS, Max. resolution: 2688×1520@25fps
Supports low bit rate, low latency and ROI
Independent settings for day or night condition

System Functions:

Dual-channel, single IP
Dual-streaming
PoE power supply
IP66 protective level
Operation temperature: 5℃ to 40℃, ＜95% RH

Interfaces:

10M/100M self-adapting network interface
Micro SD/Micro SDHC/Micro SDXC card (128G/256G) slot
1-ch alarm input/output
1-ch audio input/output
1-ch 12 VDC power input

Security:

Security verification, such as HTTPS, supports license creating
Three level of users, IP address filtering, user and password authentication

Metal Detection Key Features:

Detection accuracy: metal in the size like a clip (or 1/2 clip) is detectable on the middle of the detector. Goods like Belt buckle can be excluded. Copper, aluminum, and zinc (over 150 g) , controlled knife, and gun are detectable
Anti-interference: multiple detector can work abreast at the same time
Multi-area alarm: Indicates the metal position on the body. Max. 18 areas
Frequency settings: 100 frequencies can be set, and different ring tone for different frequency
Sensitivity Settings: 255 level of sensitivity can be set
People counting: display the number of walk-through people and people in alarm
Positioning LED: LEDs on the sides of the detector for indicating the position of the prohibited goods.
LCD screen
Storing sensitivity parameters for different scenes for shortcut settings.
Material: PVC shell

Detection

HIKVISION Case Studies:

Two case studies available as supplied by HIKVISION.

Case study 1, HIKVISION thermal technology in action - Care Home.

Case study 2, HIKVISION thermal technology in action - Place of Work.

About HIKVISION

Hikvision is a world leading provider of security products and solutions. Featuring an extensive and highly skilled R&D workforce, Hikvision manufactures a full suite of comprehensive products and solutions for a broad range of vertical markets. In addition to the security industry, Hikvision extends its reach to smart home tech, industrial automation, and automotive electronics industries to achieve its long-term vision. Hikvision products also provide powerful business intelligence for end users, which can enable more efficient operations and greater commercial success.

HIKVISION ISD-SMG318LT-F Technical Specification
Thermal Imaging
Sensor	Vanadium oxide uncooled sensor
Max. Resolution	160× 120
Pixel Interval	17μm
Response Waveband	8 to 14μm
NETD	≤ 40mk(@25°C, F#=1.0)
Lens (Focal Length)	3mm
MRAD	9.44
Field of View	50° × 37.2°
Min. Focusing Distance	0.5m
Aperture	1.1
Pseudo Colour	15, white heat, black heat, fusion1, rainbow, fusion2, iron oxide red1, iron oxide red2, puce, color1, color2, ice & fire, rain, red heat, green heat, & dark blue
Visible Light
Sensor	4 MP 1/2.7" Progressive Scan CMOS
Resolution	2688 × 1520 @ 25fps
Min. illuminance	0.0018Lux @ (F1.6,AGC ON), 0 Lux with IR
Shutter speed	1/3s to 1/100,000s
Focal length	4mm
Field angle	84.0° × 44.8°
Day/Night switch	ICR
WDR range	120dB
IR distance	Max. 15 m
Image Frame
Thermal imaging & visible light	Thermal imaging integrated with visible light frame
Picture in picture	Supports visible light & thermal imaging frame overlay
Smart information overlay	Supports (only temperature measurement rule & temperature are supported)
Smart Function
Linkage alarm	Linkage of strobe light & audible alarm
Temperature Measurement
Temperature exception detection	Expert mode: 10 pints, 10 frame, 21 rules on each line
Body temperature measurement	AI face detection, multi-target detection
Measurement range	30 to 45℃
Temperature Alarm	Alarm triggered when the temperature is over the threshold
Measurement accuracy	No black body:±0.5℃
	With black body: ±0.3℃
Compression
Video compression	H.265 / H.264/M JPEG
H265:	Main Profile
H264:	Baseline Profile / Main Profile / High Profile
Video bit rate	32 Kbps to 8 Mbps
Video standard	G.711 / G.722.1 / G.726 / MP2L2 / PCM
Audio bit rate	64Kbps (G.711) / 16Kbps (G.722.1) / 16Kbps (G.726) / 32-192Kbps (MP2L2)
Storage
SD card storage	Micro SD / Micro SDHC / Micro SDXC card (128GB or 256GB)
NVR storage	(96/86/77/76）I series NVR
	Supports live view/playback, rule display, alarm report, & remote configuration
Network
Main stream	Visible light: 50Hz: 25fps (1920 × 1080), 25fps (1280 × 960), 25fps (1280 × 720)
	Visible light: 60Hz: 30fps (1920 × 1080), 30fps (1280 × 960), 30fps (1280 × 720)
	Thermal Imaging: 25fps (160 × 120 (output320 × 240))
Sub stream	Visible light: 50Hz: 25fps (704 × 576), 25fps (640 × 480)
	Visible light: 60Hz: 30fps (704 × 480), 30fps (640 × 480)
	Thermal Imaging: 25fps (160 × 120 (output 320 × 240))
Network protocol	IPv4/IPv6, HTTP, HTTPS,802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NT
	P, RTSP, RTCP, RTP, TCP, UDP, IGMP, ICMP, DHCP, PPPoE, Bonjour
Interface protocol	ONVIF (PROFILE S,PROFILE G), ISAPI, SDK, Ehome, GB28181
Max. live view channel number	20
User	Three level: administrator, operator, general user
Safety strategy	User & password authentication, HTTPS encryption, IEEE 802.1x control, IP address filtering
Interface
Alarm input	1, 0 to 5 V alarm input
Alarm output	1, NO relay output, alarm type configurable
Audio input	1, 3.5mm Mic in/Line in interface. Line input: 2-2.4V[p-p]
Audio output	1, 600Ω
Reset button	1
Network interface	1,RJ45 10/100M self-adaption
RS-485 interface	1
SD card slot	1
Client	iVMS-4200/HIK-CONNCET
Browser	IE7+, Chrome18+, Firefox5.0+, Safari5.02+
General
Power supply	110~240VAC, 50-60Hz
Consumption	<72W
Operation temperature & humidity	Speed dome: 5℃ to 40℃, ＜95% RH Walk-through detector: -20℃ to 85℃, 99%, RH
Protective level	Dome camera: IP66
	Walk-through detector: IP53
Dimension
Detector dimension(without dome camera)	2200 x 850 x 480mm (H x W x D)
Dome camera dimension	138.3 mm × 138.3 mm × 123.1 mm (H x W x D)
Package dimension	2270 x 700 x 230mm (H x W x D)
Weight	About 50Kg

Click here to download datasheet

Delivery Notices (Updated March 29th 2021)

During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time.
Coupled with manufacturers on reduced output due to more stringent working practices and a global shortage of component parts to supply UK manufacturing, we have taken the decision to temporarily limit our services rather than let our customers down amid these unprecedented circumstances.
We hope you will understand our position on this and we apologize unreservedly for the inconvenience we know it will cause.

Please note that ALL orders placed before 3:00pm are shipped same-day (subject to stock and any additional services required).
The stated transport times above have some scope for adjustment built-in for the Covid-19 situation. Carriers themselves also have their own extended workload and limitations at this time which are unfortunately beyond our control.

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT - Order by 3:0pm	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT - Order by 3:0pm	£4.75
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 3:0pm	£7.75
Saturday ANYTIME Delivery - Order by 3:0pm	£9.95

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable.
E&OA

HIKVISION ISD-SMG318LT-F Walk Through Temperature Scanner

ISD-SMG318LT-F walk-through thermal imaging and metal detector. Allowing controlled mass subject screening ideally suited to high traffic areas such as shopping malls, airports and sports centres and networkable to your security or surveillance centre.

HIKVISION ISD-SMG318LT-F Walk Through Temperature Scanner

Mass subject bodily temperature screening with metal detection for high traffic areas

Thermal Imaging Key Features:

Metal Detection Key Features:

HIKVISION Case Studies:

About HIKVISION