The images provided are for illustrative purposes only. Please refer to product description.

Drager UCF 7000 Intrinsically Safe Thermal Imaging Camera

Drager UCF 7000 Intrinsically Safe Thermal Imaging Camera with an almost indestructable housing and an ATEX Zone 1 rating. Designed for emergency services

0 Review(s) Add Your Review

Next Day Delivery (subject to availability)

£10,856.91 excluding VAT £13,028.29 including VAT @ 20%

2x Magnification
Built-in Laser Pointer
Designed for Emergency Services
Ex ATEX Zone 1 Rated
Rated to IP67
Uncompromising Build Quality
Professional level camera
Built-in digital camera

Add Certificate Of Calibration?

Required Fields

Qty:

Confirm Availability
Calibration Info

Information on calibration of newly purchased equipment and what it means to you.

Calibration and it's certification comes in varying forms on new equipment and in this section we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as a end of line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your companies name on and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within it's intended application, it has no traceable certificate or constitute any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

FREE personalised traceable calibration certificate

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your companies details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a FREE personalised traceable calibration certificate. This equipment is supplied by the manufacturer with a basic statement of conformity. We have upgraded the equipment to include a full personalised traceable calibration certificate for you in our laboratory at our expense.
You are advised to renew your calibration annually.

Where offered this can be identified by the logo below:
Call Me Back
Seen it cheaper? Click Here

Description
Features & Specification
Resources
Delivery (updated)

Dräger UCF® 7000 Intrinsically Safe Thermal Imaging Camera

A professional level device aimed at emergency, search and rescue services

Easy to use with one hand only. See more and make better decisions with optimal display options provided by the Dräger UCF® 7000 thermal imaging camera. The camera is intrinsically safe (ATEX zone 1) and offers the maximum level of safety and reliability in potentially explosive atmospheres.

Drager UCF 7000 Overview

Made for professionals

Thermal imaging cameras by Dräger are valuable tools for orientation when fire, smoke, and darkness make navigation difficult. Designed to maintain your orientation to see where you are going as well as for finding persons or hotspots. Whether "indoor fire fighting" or "searching for a person" – various tasks can now be mastered optimally with the help of the new generation of Dräger UCF thermal imaging cameras. The Dräger UCF 7000 provides a clear plus when it comes to safety and reliability, ease of use and decision making assistance for demanding firefighting jobs. The camera is equipped with innovative functions to meet and satisfy today's requirements for professional search and rescue and firefighting personnel. And while the Dräger UCF 7000 is very easy to use, it also delivers excellent image quality. Application-specific displays provide more clarity and facilitate assessment of a situation.

Comfortable one-hand operation

Using the Dräger UCF 7000 means one hand is always free: an invaluable plus and added freedom of movement for the user. The compact design and well-balanced low weight of only 1.4 kg (3 lbs) make the camera easy to operate with just one hand. The "application switch" makes it possible to use the camera safely and to utilize its functionality to the full extent even in highly stressful situations. A very sturdy attachable "crawling plate" permits the user to brace himself or herself on the ground without letting go of the camera. Also offering various carrying options for optimal carrying comfort.

Better overview, more details

The Dräger UCF 7000 delivers excellent images to firefighters even if visibility is less than optimal. A resolution of 160 x 120 pixel as well as a 2x zoom provide a detailed impression of the situation. When the current image is always right in front of your eyes, rooms and the immediate vicinity are searched quickly and safely. The risk of overlooking a detail is especially likely and a problem in difficult situations. Thanks to the "application switch" (application-specific operating modes), the Dräger UCF 7000 makes it possible to optimize the image display of the camera for the specific task at hand. For example, the camera's display can be optimized for finding persons or finding sources of fire.
One of three additional operating modes is quickly selected just by pressing a button:

Fire (firefighting)
Persons (search and rescue)
ThermalScan (searching for hotspots)

This additional selection provides firefighters with better insights in any situation.

Extended functionality

Optimized image processing provides a quicker overview in just seconds. The Dräger UCF 7000 even makes it possible to "see around corners" if the equipment limits the freedom of movement or the field of view. The "snapshot"-function is used to provide a temporary freeze-frame of thermal image, which can then be viewed on the display. This allows personnel to examine and check out even difficult to access areas quickly and safely. The integrated laser pointer significantly simplifies pointing out the position of hazards – such as hotspots – to other team members and clearly defines the path of attack. The Dräger UCF 7000 always offers a high temperature resolution – even in hot situations. This makes it possible to detect cooler objects such as people even in the vicinity of a fire with best possible resolution. Integrated video- and sound recording functions as well as the ability to record single images are part of the Dräger UCF 7000 delivery scope.

Extremely robust

This camera is reliable even in the roughest and toughest environments and with the most demanding applications. Equipped with an almost indestructible housing, the Dräger UCF 7000 is heat-resistant and withstands usage-specific mechanical stresses with ease. Due to their high protection class of IP 67, Dräger UCF 7000 cameras are resistant to typical conditions encountered during an operation such as water and dust. Modern lithium-ion battery technology yields operating times of up to four hours and provides users with the peace of mind needed during long runs.

Ex protection for safety

An explosive atmosphere may be prevalent especially for calls where there is no fire. This means the equipment used must not be a source of ignition. The Dräger UCF 7000 is the tool of choice even in these types of situations. The device is intrinsically safe and approved for use in potentially explosive atmospheres including zone 1 according to ATEX.

Standard USB interface

The Dräger UCF 7000 is supplied with USB 2.0 interface by default, which makes it possible to configure the camera (e.g. setting an individual start image) and transfer the thermal image directly to a PC. Recorded images and video sequences used for documentation purposes can also be transferred to a PC.

Spares & Accessories (Not Supplied):

Transport case 83 21 099
Neck strap 83 23 031
Retractable lanyard 83 23 032
Hand support loop 83 23 033
Li-ion battery (with Ex-approval) 83 23 075
Battery charger 83 21 247
Power supply for charger 83 16 994
Vehicle Installation Kit (bracket and 12-30 V-cable) 83 21 110
Suction tripod, e.g. to mount on truck roof 83 23 070
Tripod 83 21 254 12
V-adapter for operations with tripod 83 21 251
12 V-power supply for operations with tripod 83 16 994

Drager UCF 7000 Accessories

About Intrinsically Safe Products

Products that appear on this website that are listed as or relate to a classification of intrinsic safety are titled and described according to our best understanding and/or interpretation of the complex and sometimes changing criteria governing such classification as set out by the Health and Safety Executive.

Please note that due to the volatile nature of the intended use of products in this category, neither UK Test Instruments or Instrument Sales and Service can be held responsible for any incident that arises from the purchase or use of any product described within this web site. For more information please visit the health and Safety Executive website with specific regard to Hazardous Area Classification and Control of Ignition Sources.

Dräger UCF 7000 Intrinsically Safe Thermal Imaging Camera
Dimensions of camera (B x H x T)	125 x 280 x 110 mm
Weight	1.4 kg (3 lbs) incl. battery
Display
Technology	Liquid crystal display (LCD)
Size (diagonal)	9 cm (3.5")
Application modes	Standard, Fire, Persons, ThermalScan
Housing
Protection cover	Rubber material EPDM
Carrying loops	High-temperature resistant material
Housing material	High-temperature resistant plastic
Protection class	IP 67
Infrared-specifications
Type of sensor	a-Si Microbolometer Array
Resolution	160 x 120 Pixel
IR spectral	7 to 14 µm
Temperature sensitivity	typically 0.035 °C (0.063 °F)
Picture frequency	50 Hz
Optics
Material	Germanium
Focus	From 1 m to infinity
Field of view	Horizontal: 47° / Vertical: 32° / Diagonal 62°
Operation
Operation time (at 23°C) with battery	typically 4 hours
Temperature measurement	Digital temperature display: -40 °C … 1,000 °C (-40 °F ... 1832 °F)
Operating temperature	-40 °C … 85 °C (-40 °F ... 185 °F) 150 °C (300 °F) for 20 minutes, 260 °C (500 °F) for 10 minutes
Battery technology	Rechargeable li-ion batteries
Battery Display	Precise 4-level battery indicator
Approvals	The Dräger UCF 7000 meets the following explosion protection regulations: IEC 60079-0:2007 IEC 60079-11:2006 EN 60079-0:2009 EN 60079-11:2007 ANSI/ISA 12.12.01 CAN/CSA E60079-0 CAN/CSA E60079-11 It is classified as follows: for Europe: l M2 / ll 2G, Ex ib l Mb / Ex ib llC T4 Gb for Australia: Ex ib llC T4 Gb for the USA and Canada: Class l, Div. 2, Groups A, B, C, D, Class l, Zone 1, Ex ib llC T4Flame engulfment-test according to EN137:2006 NFPA 1801:2013

Delivery Notices (Updated March 29th 2021)

During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time.
Coupled with manufacturers on reduced output due to more stringent working practices and a global shortage of component parts to supply UK manufacturing, we have taken the decision to temporarily limit our services rather than let our customers down amid these unprecedented circumstances.
We hope you will understand our position on this and we apologize unreservedly for the inconvenience we know it will cause.

Please note that ALL orders placed before 3:00pm are shipped same-day (subject to stock and any additional services required).
The stated transport times above have some scope for adjustment built-in for the Covid-19 situation. Carriers themselves also have their own extended workload and limitations at this time which are unfortunately beyond our control.

Easter 2021

Easter is always a busy time for suppliers and distributors alike, please bear in mind that we will be away from the office from 17:00 Thursday 1st - 08:00 Tuesday 6th April.
This will likely further impact expected lead times on goods arriving and leaving our premises, we advise you to place your order in good time to negate delays as far as possible.
We apologise for the added disruption that this period is likely to bring.

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Revised March 2021)

Service	Price
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT - Order by 3:0pm	FREE
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT - Order by 3:0pm	£4.75
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 3:0pm	£7.75
Saturday ANYTIME Delivery - Order by 3:0pm	£9.95

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable.
E&OA

Drager UCF 7000 Intrinsically Safe Thermal Imaging Camera

Drager UCF 7000 Intrinsically Safe Thermal Imaging Camera with an almost indestructable housing and an ATEX Zone 1 rating. Designed for emergency services

Dräger UCF® 7000 Intrinsically Safe Thermal Imaging Camera