The images provided are for illustrative purposes only. Please refer to product description.

Testo 875-2i Infrared Camera 0563 0875 V2

With the testo 875-2i thermal camera, you can do your industrial and building thermography work even more easily and quickly.

0 Review(s) Add Your Review

Next Day Delivery (subject to availability)

£2,490.00 excluding VAT £2,988.00 including VAT @ 20%

3.5" LCD Screen
Case Included
Field of view 32° x 23°
Manual Focus
640 x 480 pixels

Add Certificate Of Calibration?

Add Optional Extras?

Testo Spare Battery 0554 8802 —

£79.95 exc. VAT £95.94 inc. VAT £106.80 inc. VAT

Testo Emission Tape 0554-0051 —

£59.00 excluding VAT £70.80 including VAT @ 20%

Testo Desktop Charging Station 0554-8801 —

£182.95 exc. VAT £219.54 inc. VAT £238.80 inc. VAT

Required Fields

Qty:

Confirm Availability
Calibration Info

Information on calibration of newly purchased equipment and what it means to you.

Calibration and it's certification comes in varying forms on new equipment and in this section we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as a end of line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your companies name on and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within it's intended application, it has no traceable certificate or constitute any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

FREE personalised traceable calibration certificate

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your companies details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a FREE personalised traceable calibration certificate. This equipment is supplied by the manufacturer with a basic statement of conformity. We have upgraded the equipment to include a full personalised traceable calibration certificate for you in our laboratory at our expense.
You are advised to renew your calibration annually.

Where offered this can be identified by the logo below:
Call Me Back
Seen it cheaper? Click Here

Description
Features & Specification
Resources
Delivery

Testo 875-2i Infrared Camera with SuperResolution

You can carry out completely non-destructive tests on materials and components in industrial thermography with the testo 875-2i. The high temperature option extends the measuring range from +350 °C to +550 °C. Using the built-in digital camera, you can create a real image in parallel to the thermal image. So as to make the documentation and assignment of real and thermal images even easier for you, the testo 875-2i infrared camera is also equipped with voice recording. This means you can save comments to go with your images using the headset.

In building thermography you can efficiently detect possible structural defects and places with a risk of mould with the testo 875-2i infrared camera. Traffic light colours in the display (red, yellow and green) directly indicate to you critical places with a risk of mould.

Key Features:

Very good image quality: IR resolution 160 × 120 pixels, with SuperResolution Technology 320 × 240 pixels
Thermal sensitivity < 50 mK, high-quality 32° × 23° lens, automatic hot/cold spot detection and optional temperature measurement up to +550 °C
Including a built-in digital camera and voice recording via a headset
Building thermography: Direct display of the risk of mould via traffic light colours
Solar Mode

The Testo 875-2i Infrared Camera’s Technical Features

The testo 875-2i infrared camera is not only characterised by its intuitive operation. It also simplifies professional industrial and building thermography and has the following impressive features:

Resolution and image quality: Detector size 160 × 120 pixels = 19 200 temperature measuring points. SuperResolution Technology enables you to take image quality right up to the next level of 320 × 240 pixels in next to no time. Four times as many readings and a geometric resolution that has been improved by a factor of 1.6 mean you get even more detail and even greater reliability with thermographic measurements
High-quality 32° × 23° lens: The lens with its manual focusing enables a wide field of view and an ideal overview of the temperature distribution, along with precise focusing on the object being measured
9° × 7° telephoto lens: Record very distant objects precisely with the exchangeable 9° × 7° telephoto lens (optional)
Automatic hot/cold spot detection: Critical temperature conditions are directly displayed during thermography
Special measuring mode for detecting areas with a risk of mould for building thermography: The dew point in the room is calculated by manual entry of the ambient temperature and humidity. The surface temperature value measured by the infrared camera is then compared to the dew point. The display now shows the risk of mould in traffic light colours (red, yellow and green). It is easier with the radio humidity probe: Automatic transmission of readings means that manual input of humidity and ambient temperature is no longer needed

The Testo 275-2i Comes Supplied With:

Robust case
Pro software for image evaluation on the PC
Soft case
Carrying strap for the infrared camera
SD memory card
USB cable for data transfer to PC
Lens cleaning cloth
Mains unit
Li-ion battery
Adapter for tripod mounting
Headset for voice recording

Applications of The Testo 275-2i:

Testo 875-2i Thermal Imaging Camera

Guaranteeing power generation

Energy is an important commodity that must always be available in sufficient quantities. For this reason, power stations and utility companies ensure that no interruptions occur, from power generation through to distribution. Testo thermal imagers support the preventive maintenance of electrical and mechanical components. This means developing damage is identified early.

Checking as part of mechanical maintenance

Signs of wear in machinery often become apparent long before a malfunction, due to an increase in temperature. Possible causes are friction, incorrect adjustment, tolerances of mechanical components or a lack of lubricant. With a thermal imager, any suspicious changes can be spotted immediately. The main advantage of using thermography in a maintenance operation: it is non-contact and can therefore be carried out on all mechanical installations during operation and from a safe distance.

Checking as part of electrical maintenance

In electrical installations or cables, increased temperatures are always an indication of an overload, an imminent malfunction or an existing defect. Testo thermal imagers facilitate evaluation of the heat status of low, medium and high-voltage systems. Thermographic images lead to the early detection of defective components or connections, so that the necessary preventive measures can be introduced in a targeted way. Thermography therefore minimizes dangerous fire risks and prevents costly production downtimes.

Detecting structural defects and ensuring construction quality

Analysis with a Testo thermal imager is a fast and efficient method of detecting possible structural defects. Furthermore, Testo thermal imagers are ideal for providing proof of the quality and the correct implementation of construction measures. Any heat losses, humidity and areas of air permeability in a building are visible in the thermal image. The testo 870 thermal imager makes it possible to detect faulty thermal insulation and structural damage – all using a non-contact method!

More reliability in quality assurance and production monitoring

Testo thermal imagers ensure precise situation analyses, thus supporting process control and product quality assurance. In addition to foreign bodies in production processes, anomalies in the heat distribution of components are also detected quickly at a glance and without contact.

Testo 875-2i Thermal Imaging Camera

Hot on the trail of a ruptured pipe

If a pipe rupture is suspected, the only solution left is often to break open entire wall or flooring areas. With Testo thermal imagers, you can minimise the damage and reduce the cost of your work. Leakages in underfloor heating and other inaccessible pipes are located precisely and without damage. This avoids opening walls unnecessarily and considerably reduces the repair costs.

Investigating moisture damage

Not every damp wall is caused by a ruptured pipe. Rising damp or penetrating water due to rain and waste water drainage being incorrectly implemented can cause damp walls. Moisture damage can also occur due to blocked drains or insufficient seepage. Testo thermal imagers find the cause of rising damp or penetrating rain water straight away, before it can cause major damage.

Fast and easy monitoring of filling levels

The level control in sealed fluid tanks has proved to be a sensible method for avoiding machine damage and as a result production losses. If, for example, the fluid in coolant tanks falls to a dangerously low level, machines are no longer being sufficiently cooled. They run hot and fail. Often, an automatic level control regulates the level of the refrigerant and issues an alarm if the level is too low. However, the automatic control can also fail. In this case, a regular look through a Testo thermal imager will also help.

Locating leaks in flat roofs

Damp areas in the roof structure, in particular in flat roofs, store the warmth from the sun for longer than intact areas. This means the roof structure cools unevenly in the evenings. Testo thermal imagers use these temperature differences to pinpoint the exact roof areas with trapped moisture or damaged insulation.

Easy monitoring of heating and installation systems

Testo thermal imagers are easy and intuitive to operate, so they are ideal for quickly and reliably checking heating, ventilation and air conditioning systems. A quick glance with the thermal imager is enough to discover irregularities in the temperature distribution. Thus, thermography can be used to easily locate clogged radiators and leaks.

Testo 875-2i Thermal Imaging Camera

ISSWWW and Testo

Testo Limited was established in 1983 as the UK subsidiary of testo and is based in Alton, Hampshire where they supply a full range of test equipment across the UK and Ireland. They are a key supplier to the Facility Management and Industrial Maintenance Sectors where they are able to provide the full range of instruments which are critical to the effective and efficient maintenance of premises, and allow compliance with all key regulations.
Testo have many innovative products to their portfolio with a modern attractive design. Aesthetic appeal isn't something usually attributed to test equipment but Testo really breaks the mould. Coupled with their pedigree as a worldwide manufacturer and supplier with a proven track record, we are confident in supplying and recommending Testo products without reservation.

Infrared image output
Focus	manual
Infrared resolution	160 x 120 pixels
Image refresh rate	33 Hz
SuperResolution (IFOV)	2.1 mrad (Tele: 0.6 mrad)
SuperResolution (Pixel)	320 x 240 pixels
Geometric resolution (IFOV)	3.3 mrad (Tele: 1.0 mrad)
Minimum focus distance	0.1 m (Tele: 0.5 m)
Field of view	32° x 23°
Thermal sensitivity	˂ 50 mK at +30 °C

Image output visual
Minimum focus distance	0.4 m
Image size	640 x 480 pixels

Image presentation
Display option	IR image only; real image only; IR image / real image
Number of colours	10
Colours	10 (iron, rainbow, rainbow HC, cold-hot, blue-red, grey, inverted grey, sepia, Testo, iron HT)
Display type	3.5" LCD with 320 x 240 pixels
Video output	USB 2.0

Measurement
Reflected temperature	manual
Measuring range	-30 to +100°C; 0 to +350 °C (switchable)
High temperature measuring	+350 to +550 °C
Accuracy	±2 °C, ±2 % of m.v. (±3 °C of m.v. at -30 to -22 °C)
Accuracy high temperature	±3 % of m.v. at +350 to +550 °C

Measuring function
Surface moisture distribution	Included
Humidity measurement	Optional
Solar mode – manual	Included
Analysis function	Up to 2 measurement points, hot/cold spot recognition, isotherms, area measurement (min/max on area)

Imager equipment
Digital camera	Included
Video streaming	Included
Voice recording	wired headset
Laser	Included
Exchangeable lenses	9° x 7°
Standard lens	32° x 23°
Power-LED	Included

Imager storage
File format image	.bmt; export option in .bmp; .jpg; .png; .csv; .xls
Storage device	SD card 2GB (approx. 2.000 images)

Power supply
Battery type	Fast-charging, Li-ion battery can be changed on-site
Operating time	4 h
Charging options	In instrument / charger (optional)
Mains operation	yes

Ambient Condition
Storage temperature	-30 °C; 60 °C
Operating temperature	-15 °C; 40 °C
Housing protection class	IP54
Vibration	2G
Air humidity	20 to 80 %RH non-condensing

Physical specification
Weight	900 g
Tripod mounting	M6
Housing	ABS
Dimensions	152 x 108 x 262

PC software
System requirements	Windows XP (Service Pack 3); Windows Vista; Windows 7 (Service Pack 1); Windows 8; Interface: USB 2.0

Standards, tests, warrenty
EU-/EG-guidelines	2004/108/EG

Click here to download datasheet

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Temporarily revised June 2020)

Please note that regrettably, we have had to realign our delivery service options to those available from our carriers.
During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time.
We have taken the decision to temporarily limit our services rather than let our customers down.
We hope you will understand our position on this and we apologise unreservedly for the inconvenience we know this will cause.
We look forward to restoring our full delivery service schedule just as soon as we are able.

Standard FREE 1-2 Day Courier Delivery – UK Mainland only - Zones A & B

Included in the price for all orders over £75.00 (exc vat). Sent using express courier, delivered within 1-2 working days from the date of your order, subject to availability.

Next Day Anytime Delivery (Excluding Saturday & Sunday) – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.

Orders must be placed before 3:00pm for a qualifying next day delivery and a telephone number supplied, subject to availability.

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we need to apply a surcharge on all deliveries made in the following regions bringing the carriage charges to:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 2 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International Delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable E&OA

Testo 875-2i Infrared Camera 0563 0875 V2

With the testo 875-2i thermal camera, you can do your industrial and building thermography work even more easily and quickly.

Testo 875-2i Infrared Camera with SuperResolution

Key Features:

The Testo 875-2i Infrared Camera’s Technical Features

The Testo 275-2i Comes Supplied With: