Socket and See High Resolution Loop Tester PDL PRO
- AC Voltage VLN - VLE - VNE
- Hands free function
- High current L-e loop test
- High current
- High resolution L-E loop test
- High current
- High resolution L-N loop test
- No Trip loop L-E test
- PFC / PSC measurements
- Polarity
- voltage present LED
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Socket and See High Resolution Loop Tester PDL PRO
The PDL PRO is a no trip and high current, high resolution digital earth loop impedance tester.
The Socket & See PDL PRO also features a large backlit display that illuminates when the tester is switched on as well as during testing, making testing easy in poorly lit areas. The unit will automatically power off after approximately 3 mins of inactivity and features a secure protective rubber boot to protect the unit against every day bumps and scrapes. For additional protection, the PDL PRO is also fully protected against accidental phase to phase connection.
The PDL PRO also uses true impedance technique for accurate measurement of Prospective Fault Current (PFC) and also calculates Prospective Short Circuit (PSC) in the event of a short circuit between the live conductors.
The PDL PRO Comes Supplied With:
- Socket & See PDL PRO
- Socket & See mains lead inc 3 x 4mm connectors
- Socket & See PDL PRO instruction manual
- Magnetic hanging strap
- 4 x AA batteries
Key Features:
- No Trip loop L-E test
- High current L-E loop test
- High current, High resolution L-E loop test
- High current, High resolution L-N loop test
- AC Voltage VLN - VLE - VNE
- Distribution network operator polarity test pad
- PFC / PSC measurements
- Hands free function
- Polarity, voltage present LED
- Auto switch off function for battery preservation
Socket & See PDL PRO test sequences
Loop No Trip L-E
This is a 3 wire test to measure Zs where the circuit is protected by a RCD. Where possible, non-essential electrical equipment should be disconnected to reduce the chance of the RCD tripping as a result of leakage build up.
Loop High Current L-E
The High current test is used to measure Ze at the distribution board downstream of any RCD or Zs, where the circuit is not protected by an RCD.
High Resolution L-E / L-N
The High current tests are used to measure Ze or Zs, where the circuit is not protected by an RCD. Results will be displayed to 1 mohm resolution
Hands Free
The hands free function can be used with any loop measurement. Select the loop measurement required with the rotary dial. Pressed the HANDS FREE button and HANDSFREE will be displayed on the screen. Once the tester is connected, correct voltage and polarity is confirmed and loop test will be conducted without TEST being pressed.
Volts L-N / L-E / N-E
Voltage L-N is the tester's default setting. By pressing VOLTS LN-LE-NE the volatge displayed will be toggled. the volatge displayed can be toggled before or after the loop test is carried out.
PFC / PSC
After a loop test has been carried out the calculated PFC and PSC can be displayed by selecting PFC L-E / PSC L-N
Polarity Test Pad
Touch the touchpad area next to the test button. There should be no change in the indication given. If the Voltage / Polarity LED flashes RED and a warning tone emitted when the touchpad is touched, a potentially dangerous polarity reversal exists.
The Socket & See PDL PRO is fully BS EN 61010 and BS EN 61557 certified.
EMC compliance - BS EN 61326
About Socket & See
Through consistent contact with Electricians, Engineers and Gas Installation engineers, Socket & See products have been around since 1998 and are designed with both professional and newly-qualified tradespeople in mind.
We started with 3 simple Socket Testers and a vision to develop a range of ‘easy-to-use’, innovative products which our customers could use straight from the box!
The initial principles still stand firm today, all our products have to be - simple to operate, of great quality, innovative, time-saving and cost-effective.
| Key Features | AC Voltage VLN - VLE - VNE, Hands free function, High current L-e loop test, High current, High resolution L-E loop test, High current, High resolution L-N loop test, No Trip loop L-E test, PFC / PSC measurements, Polarity, voltage present LED | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||
| Manufacturer | Socket and See | ||||||||||||||||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA