- Features & Specification
Megger MTR105 Rotating Machine Tester
*Important Calibration Information:
This instrument comes complete with the manufacturers calibration certificate. Please be aware that these certificates are generic and may also be time lapsed. If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.
Megger MTR105 Comes Supplied With:
MTR105 Rotating Machine Tester 1010-361
- Hook strap assembly
- Soft pouch
- Temperature probe, T type CAT III 600 V
- IR lead set (comprising of):
3 x Grabber Clips (Red, Black & Blue)
CAT III 1000 V, CAT IV 600 V
3 x 4 mm Test leads, 2 m, 1 end Right Angle
1 end straight (red, black & blue) CAT III 1000 V, CAT IV 600 V
3 x Test probes (red, black & blue), long reach (100mm),
CAT III 1000 V, CAT IV 600 V
- Kelvin clip lead set CAT III 600 V (comprising of):
2 x Kelvin Clip leads, 2 metres, 4mm Right Angled Connectors(4), Single (2-core) cable.
- Full colour graphic display
- 3 Phase insulation resistance
- Temperature correction for insulation resistance
- Guard terminal
- DLRO four wire Kelvin
- Continuity and diode test
- Motor direction of rotation
- Capacitance and inductance
- CAT III 600 V up to 3000 m
- Environmental protection to IP54
- Production tests for new manufactured motors and generators.
- Test repaired and refurbished motors and generators.
- Monitoring and maintenance of in service motors (off line) in the field.
Utilities: Electrical power generation, water, oil / gas.
Industrial: Production line / factory maintenance teams,
HVAC field engineers.
OEM: Motors / generators.
Service: Motor repair workshops.
Transport: Rail, electric vehicles, marine, etc.
Insulaton Resistance Tests
Continuity Resistance Tests
DLRO 4 Wire Kelvin low Resistance
Motor Direction of Test
Inductance, Capacitance and Resistance meter (LCR)
Storage and Download of Results
Instrument Software Updates
- Meets the international requirements of IEC61010 and IEC61557.
- Live circuit detection and test inhibit on all measurements with user notification (except for direction of rotation measurements).
- User selectable insulation test terminal lockout voltage 25 V, 30 V, 50 V, 75 V (default is 50 V).
- Detection and inhibit functions when the protection fuse has failed.
- Suitable for use on CAT III applications and supply voltages to 600 V.
ISSWWW and Megger
The extensive Megger product portfolio provides electrical test equipment for an exceptionally wide range of applications at any point of the electricity network. From small handheld low voltage equipment such as multifunction installation testers through to high voltage asset test equipment like insulation resistance testers, circuit breaker analysers, protection relay test systems to transformer condition measurement devices.
Megger designs and manufactures portable electrical test equipment in factories located in Germany, Sweden, the UK, and USA. Megger products help you install, improve efficiency, reduce cost and extend the life of you or your customers’ electrical assets.Established in the late 1800s, the company has been designing and making test and measurement instruments that perform electrical measurements for preventative maintenance, troubleshooting and commissioning for decades. Megger products have supported customers all over the world to improve their facilities’ efficiency, reduce costs, extend the life of apparatus and through trending and analysis, anticipate equipment failure and future performance.
Being a brand synonymous with the industry and a cornerstone pioneer of many of today’s everyday items of test equipment, ISSWWW are proud to bring you Megger’s full range of equipment and services, now and into the future.
|Megger MTR105 Rotating Machine Tester Specification|
|Specifications - All quoted accuracies are at 20ºC (68ºF)|
|50 V||10 GΩ ±2% ±2 digits ±4.0% per GΩ|
|100 V||20 GΩ ±2% ±2 digits ±2.0% per GΩ|
|250 V||50 GΩ ±2% ±2 digits ±0.8% per GΩ|
|500 V||100 GΩ ±2% ±2 digits ±0.4% per GΩ|
|1000 V||200 GΩ ±2% ±2 digits ±0.2% per GΩ|
|Polarisation index (PI)||10 min / 1 minute ratio|
|Dielectric absorption ratio (DAR)||User configurable 15 s or 30 s t1|
|start time with t2 fixed at 60 s|
|Guard terminal performance||
<5% error at 500 kΩ parallel circuit resistance with 100 MΩ load
Short circuit/charge current
|2 mA +0% -50% (IEC61557-2)|
|Terminal voltage accuracy||-0% +2% ±2 V|
1 mA at min. pass value of insulation to a max. of 2 mA
|Operation range||0.10 MΩ to 1.0 GΩ (IEC61557-2)|
|Leakage current display||0.1 uA resolution 10% (±3 digits)|
|Voltage display||±3% ±2 digits ±0.5% of rated voltage|
|Note||Above specifications only apply when high-quality silicone leads are being used - as supplied with the instrument.|
|Measurement||0.01 Ω to 1 MΩ (0 to 1000 kΩ analogue scale)|
|Accuracy||±3% ±2 digits (0 to 99.9 Ω|
|±5% ±2 digits (100 Ω - 500 kΩ)|
|Test current||200 mA (–0 mA +20 mA) (0.01 Ω - 4 Ω)|
|Polarity||Single or Dual (factory default) polarity|
|Lead resistance||Null up to 10 Ω|
|Selectable current limit||20 mA and 200 mA|
|Range||0.1 nF - 1 mF|
|Accuracy||±5.0% ±2 digits (1 nF - 10 μF)|
|Range||dc: 0 - 1000 V|
|ac: 10 mV - 1000 V|
|TRMS sinusoidal (15 Hz - 400 Hz)|
|Accuracy||dc: ± 2% ±2 digits (0 - 1000 V)|
|ac: ± 2% ±2 digits|
|(10 mV - 1000 V TRMS)|
|Frequency range||15 - 400 Hz (50 mV - 1000 V)|
|Frequency resolution||0.1 Hz|
|Frequency accuracy||±0.5% ±1 digit|
|Diode Test||Diode test accuracy: ±2% ±2 digits 0.01 V to 3.00 V|
|Display range||0.00 V to 3.00 V|
|Temperature Measurement and Compensation|
|Thermocouple||Type T (Type K and Type J)|
|Thermocouple range||-20 °C to 200 °C (4 °F - 392 °F)|
|Instrument range||-20 °C to 1000 °C (4 °F - 1832 °F)|
|Instrument resolution||0.1 °C (0.18 °F)|
|Instrument accuracy||±1.0 °C ±20 digits (1.8 °F). (Basic accuracy stated assumes forward and reverse measurements.)|
|DLRO Four-Wire Kelvin Low Resistance|
|Test current||200 mA dc|
|Range||1 mΩ to 10 Ω|
|Accuracy||± 0.25% rdg. ± 10 digits, accuracy stated includes forward and reverse measurements.|
|1 H||±(0.7 % +(Lx/10000) % +5 digits)||1 kHz|
|200 mH||±(1.0 % +(Lx/10000) % +5 digits)||120 Hz|
|±(0.7 % +(Lx/10000) % +5 digits)||1 kHz|
|20 mH||±(2.0 % +(Lx/10000) % +5 digits)||120 Hz|
|±(1.2 % +(Lx/10000) % +5 digits)||1 kHz|
|2 mH||±(2.0 % +(Lx/10000) % +5 digits)||1 kHz only|
|Storage capacity||256 motor results (date / time stamped)|
|Data download||USB Type A (USB Mass Storage Device)|
|Battery||6 x IEC LR6 1.5 V Alkaline (AA), IEC FR6 1.5 V Lithium (LiFeS2 ), IEC HR6 1.2 V NiMH (rechargeable option).|
|Battery life||10 motors per (complete suite of tests at 100 V into 100 MΩ) IEC61557-2 - test cycle, 1200 insulation tests with duty cycle of 5 s testing on 25 sec standby @ 500 V into 0.5 MΩ.|
|IEC61557-4 test cycle, 1200 continuity tests with duty cycle of 5 sec testing on 25 sec standby on 1 Ω resistance|
|Battery charging||Mains battery charger kit.|
|Safety protection||IEC61010-1 CAT III 600 V|
|Temperature coefficient||<0.1% per °C up to 1 GΩ|
|Operating temperature range||-10 °C to 50 °C (14 °F to 122 °F)|
|Storage temperature range||-25 °C to 65 °C (-13 °F to 149 °F)|
|Humidity||90% RH at 40 °C (104 °F) max.|
|Calibration temperature||20 °C (68 °F)|
|Maximum altitude||3000 m (9843 ft.)|
|Display||Full LCD colour screen with user-configurable backlight|
|Languages||English, French, German and Spanish.|
|Dimensions||228 x 105 x 75 mm (8.98 x 4.1 x 2.95 in)|
|Weight||1.00 kg (2.2 lbs)|
|Fuse||x2 500 mA (FF) 1000 V 32 x 6 mm ceramic fuse, high break capacity HBC, 30 kA minimum. Glass fuses must not be installed.|
Standard FREE 3-5 Day Courier Delivery – UK Mainland only - Zones A & B
Included in the price for all orders over £40.00 (exc vat). Sent using express courier, delivered within 3-5 working days from the date of your order, subject to availability.
Standard 1-2 Day Express Courier Delivery – UK Mainland only - Zones A & B
£4.50 for all all orders under £40.00 (exc vat). Sent by express courier, delivered within 1-2 working days from the date of your order, subject to availability.
Express Courier 1-2 Day Delivery – UK Mainland only - Zones A & B
£4.50 select at the checkout. Sent using express courier.
Next Day Delivery – UK Mainland only - Zones A & B
£8.00 select at the checkout. Sent using express courier, orders must be placed before 3pm for next day delivery, subject to availability.
Saturday Pre 12am - UK Mainland only - Zones A & B
£15.00 select at the checkout. Sent using express courier, orders must be placed before 3pm for Saturday delivery.
Orders must be placed before 3pm for next day delivery and a telephone number supplied, subject to availability.
Please note that predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope of our dispatch and therefore may incure additional days lead time to your order.
Orders requiring calibration. Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received late afternoon and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch, this in most cases should not add more than 24 hours to you delivery.
Because of the high cost of carriage we need to apply a surcharge on all deliveries made in the following regions bringing the carriage charges to:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands.
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands.
- Zone E - Northern Ireland
- Zone F - Republic of Ireland
International delivery charges are automatically added to your order at the checkout; you can also use the guide below for a guide on prices. For any questions regarding international deliveries please contact us at firstname.lastname@example.org
If no shipping option is available to your selected country please call us on +44 (0) 1603 406 148 to purchase your items.