The images provided are for illustrative purposes only. Please refer to product description.

Chauvin Arnoux CA 6528 1kV Megohmmeter & Digital Multimeter P01140838

NEW Chauvin Arnoux CA 6528 1kV Megohmmeter & Digital Multimeter with Differential Mode Resistance DRM and up to 700V voltage testing.

0 Review(s) Add Your Review

Next Day Delivery (subject to availability)

£269.95 exc. VAT £323.94 inc. VAT £379.20 inc. VAT

600V CAT IV IP40
Automatic voltage detection
Compliant with IEC 61557-1-2-4-10
Continuity: 0.02 Ω to 40 Ω
Insulation: up to 11 GΩ
Resistance: 1 Ω to 420 kΩ
Voltage: 0 to 700 VAC/DC

Add Certificate Of Calibration?

Required Fields

Qty:

Confirm Availability
Calibration Info

Information on calibration of newly purchased equipment and what it means to you.

Calibration and it's certification comes in varying forms on new equipment and in this section we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as a end of line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your companies name on and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within it's intended application, it has no traceable certificate or constitute any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

FREE personalised traceable calibration certificate

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your companies details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a FREE personalised traceable calibration certificate. This equipment is supplied by the manufacturer with a basic statement of conformity. We have upgraded the equipment to include a full personalised traceable calibration certificate for you in our laboratory at our expense.
You are advised to renew your calibration annually.

Where offered this can be identified by the logo below:
Call Me Back
Seen it cheaper? Click Here

Description
Features & Specification
Resources
Delivery

Chauvin Arnoux CA 6528 1kV Megohmmeter & Digital Multimeter

The CA 6528 insulation and continuity tester is designed for use in the field: lightweight, compact, rugged and easy to handle, even when wearing gloves. It's ergonomics are intended to simplify it's use.

*Important Calibration Information:

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

CA 6528 Comes Supplied With:

Hands-free carry bag
2 safety leads, 1 red and 1 black
Set of Crocodile Clips
Protective Sheath
6 x LR6 or AA batteries
1 safety datasheet
1 quick start guide
1 verification certificate

The CA 6528 insulation tester is ideal for maintenance and repair operations on electrical equipment such as motors, cables, etc. Thanks to its "hands-free" bag, the CA 6528 insulation tester can be used without any constraints in the field. The shockproof sheath with stand (props) ensure stability on horizontal surfaces.

The large LCD screen can show the insulation value and the real test voltage simultaneously thanks to its double display. The backlighting makes it easy to read in all circumstances.

The CA 6528 megohmmeter measures resistance, insulation and continuity according to the applicable international standards: IEC 60364, NF C 15-100, VDE 100, etc. The continuity measurement integrates compensation of the cables. Insulation measurement is possible in manual mode, locked mode or programmed-duration mode with the timer. When measuring the voltage, an indicator shows the battery status.

The CA 6528 indicates the test results instantaneously: the screen turns red if the threshold is overrun.

The presence of a hazardous voltage (>30 V) is detected automatically by the CA 6528, which then prohibits insulation testing.

Key Features:

Double digital display to view the insulation value and real test voltage simultaneously in an easy-to-read format
2-colour backlighting
Shockproof sheath for excellent handling
Stand for stability when used on a horizontal surface
Bag with built-in neck strap for hands-free use and to stow your measurement accessories
Automatic power-off function to optimize the battery life
Programmable alarm thresholds to view the test result instantaneously

Ergonomics:

The CA 6528 insulation and continuity tester is designed for use in the field: lightweight, compact, rugged and easy to handle, even when wearing gloves. Its ergonomics is intended to simplify its use:

Double digital display to view the insulation value and real test voltage simultaneously in an easy-to-read format
2-colour backlighting
Shockproof sheath for excellent handling
Stand for stability when used on a horizontal surface
Bag with built-in neck strap for hands-free use and to stow your measurement accessories
Automatic power-off function to optimize the battery life
Programmable alarm thresholds to view the test result instantaneously

Applications

The CA 6528 is mainly used to check the safety of electrical installations. It measures resistance, insulation and continuity in compliance with the applicable standards: IEC 60364, NF C 15-100, VDE 100, etc. It is also ideal for maintenance and repair of electrical equipment such as motors, cables, etc.

Preventative Maintenance

In addition to the measurements carried out on new and reconditioned equipment during commissioning, regular insulation testing on installations and equipment helps to avoid such incidents through preventive maintenance. These tests detect ageing and premature deterioration of the insulating properties before they reach a level likely to cause problems. The severity of such incidents may affect the safety of people and property, as well as generating production downtime costs in industry.

Measurements

The CA 6528 insulation tester can measure insulation at 250 V / 500 V / 1,000 V, making it ideal for a large number of applications. It offers high-performance insulation resistance measurements up to 11 GΩ, while also measuring resistance up to 420 kΩ and voltage up to 700 VAC/DC. In compliance with the applicable standards, continuity measurement is performed with a test current ≥ 200 mA. This measurement directly integrates automatic compensation of cable resistance for greater accuracy.

Safety

The CA 6528 is a safe instrument. The presence of a hazardous voltage is detected automatically. Insulation measurement in the presence of a voltage greater than 30 V is automatically inhibited, making insulation testing impossible.

Insulation measurement in manual or locked mode or with a duration programmed using the timer Insulation measurement with simultaneous display of the insulation and the real test voltage

CA6528

Spares and Accessories (Not Supplied):

Set of red and black safety leads 1.5 m long: P01295289Z
Red + black crocodile clips: P01295457Z
Red + black test probe: P01295454Z
Continuity rod: P01102084A

ISSWWW and Chauvin Arnoux

The Chauvin Arnoux Group of companies, incorporating the Metrix and Multimetrix brands are synonymous with design and production of the finest quality products for the electrical testing industry, covering a diverse sector of the market for over 100 years. From their awarded Digiflex current sensors, universal testers, multimeters, network and power analysers, right up to laboratory instrumentation and beyond.

ISSWWW and Chauvin Arnoux have enjoyed a close working partnership for many years and we supply many of their products to trade and industry the world over.

Chauvin Arnoux CA 6528 Technical Specification
Voltage
Measurement range/ resolution	1‐700 V / 1 V
Accuracy / input impedance	±1.2% R ± 1ct for AC+DC; ±1 R ± 1ct for DC / 25 MΩ
Operating frequency	DC; 30‐440 Hz
Insulation
Test voltage	250-500-1,000 V
Range at maximum test voltage	11 GΩ
Compliance with the IEC 61557‐2 standard	2 GΩ
Measurement range
250V	50 kΩ ‐ 4.2 GΩ
500V	100 kΩ ‐ 4.2 GΩ
1000V	200 kΩ ‐ 11 GΩ
Measurement range / resolution	50 kΩ ‐ 3.999 / 1 kΩ; (0.2)* 3.6‐39.99 MΩ / 10 kΩ; 36‐399.9 MΩ / 100 kΩ; 360‐4,200 MΩ / 1 MΩ; (1 kV) 3.6 ‐ 11.00 GΩ / 10 MΩ
Accuracy	0.05‐399.9 MΩ : ±1.5 R ± 10cts; 360 ‐4,200 MΩ: ±4 R ± 10cts ; ±4 R ± 5cts (at 1,000 V); 3.6‐11 GΩ: ±10 R ± 10cts
Test voltage (I <1 mA)	0%+20%
Timer (min:s)	10s to 39min 59s
Alarms	1 threshold / test voltage
Continuity
Measurement range	0.02 Ω ‐ 40 Ω (200 mA)
Accuracy / open-circuit voltage	±1.2% R ±3cts / 6 VDC < U < 9 VDC
Measurement current	≥ 200 mA (up to 2 Ω)
Continuity threshold (fast beep)	2 Ω / 1 Ω
Cable compensation	up to 5 Ω
Resistance
Measurement range / resolution	1 ‐399.9 Ω / 0.1 Ω; 360‐3,999 Ω / 1 Ω; 3.60‐39.99 kΩ / 10 Ω; 36.0‐420.0 kΩ / 100 Ω
Accuracy	±1.2% R ±3cts
General Specifications
Display	2 x 4,000 cts
Power supply / Automatic power-of	6 x LR 6 or AA batteries / 10 min deactivatable
Battery life	1,000 measurements: at 1 MΩ @ 1 kV (5 s ON / 25 s OFF); >3,000 continuity measurements (5 s ON / 25 s OFF) at 1 Ω
Dimensions / weight / IP rating	218 x 95 x 63 mm / 760 g / IP 40
EMC / electrical safety	IEC 61326‐1 / IEC 61010‐1, IEC 61010‐2‐030 and IEC 61010‐2‐034 / 600V CAT IV
Compliance with standards	IEC 61557 parties 1, 2, 4 and 10

*at 1,000V

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Temporarily revised June 2020)

Please note that regrettably, we have had to realign our delivery service options to those available from our carriers.
During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time.
We have taken the decision to temporarily limit our services rather than let our customers down.
We hope you will understand our position on this and we apologise unreservedly for the inconvenience we know this will cause.
We look forward to restoring our full delivery service schedule just as soon as we are able.

Standard FREE 1-2 Day Courier Delivery – UK Mainland only - Zones A & B

Included in the price for all orders over £75.00 (exc vat). Sent using express courier, delivered within 1-2 working days from the date of your order, subject to availability.

Next Day Anytime Delivery (Excluding Saturday & Sunday) – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.

Orders must be placed before 3:00pm for a qualifying next day delivery and a telephone number supplied, subject to availability.

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we need to apply a surcharge on all deliveries made in the following regions bringing the carriage charges to:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 2 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International Delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable E&OA