The images provided are for illustrative purposes only. Please refer to product description.

Beha-Amprobe ULD-410-EUR Ultrasonic Leak Detector

NEW The Beha-Amprobe ULD-410-EUR Ultrasonic Leak Detector detects air and gas leak emissions through ultrasonic sound waves, inaudible to the human ear.

0 Review(s) Add Your Review

Next Day Delivery (subject to availability)

£579.95 excluding VAT £695.94 including VAT @ 20% Regular Price: £862.80

20 kHz to 90 kHz frequency range
6.35 cm LC display with bargraph
Compressed air or other gases
Electrical/Mechanical/Plumbing Applications
Full accessory kit included
Ideal for noisy environments

Qty:

Confirm Availability
Calibration Info

Information on calibration of newly purchased equipment and what it means to you.

Calibration and it's certification comes in varying forms on new equipment and in this section we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as a end of line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your companies name on and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within it's intended application, it has no traceable certificate or constitute any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

FREE personalised traceable calibration certificate

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your companies details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a FREE personalised traceable calibration certificate. This equipment is supplied by the manufacturer with a basic statement of conformity. We have upgraded the equipment to include a full personalised traceable calibration certificate for you in our laboratory at our expense.
You are advised to renew your calibration annually.

Where offered this can be identified by the logo below:
Call Me Back
Seen it cheaper? Click Here

Description
Features & Specification
Resources
Delivery

Beha-Amprobe ULD-410-EUR Ultrasonic Leak Detector

The ultimate ultrasonic diagnostic tool for HVAC/R, mechanical and electrical inspection and troubleshooting

When equipment begins to fail due to an air or gas leak or vibration, or electrical discharge, the leakage point emits an ultrasonic sound wave that is above the natural range of human hearing. The ULD-400-EUR Series Ultrasonic Leak Detectors convert this ultrasonic sound into a signal that can be used to pinpoint the exact location of the equipment failure.

See the strength of the leak clearly on the large LCD display bargraph and identify the source of the leak by listening to the converted audible sound emitted via the headphones. When working in unpressurized systems, or the pressure is not sufficient enough to detect or verify a leak with the Receiver alone, use the Transmitter to generate the ultrasonic signal (included with the ULD-420-EUR kit). In extremely noisy environments where there is strong ultrasonic noise generated by running machinery or equipment, the Receiver’s filter function can filter out up to three main noise frequencies which would otherwise hide the noise of the fail.

The ULD-410-EUR Comes Supplied With:

ULD-400-RE Receiver
Headphones
Earbuds (for use with hard hat)
PB-1 Power Parabola
TEA-1 Flexible Tubing Adapter
TE-1 Tubular Extension
CC-ULD-400 Hard Carrying Case
AA Batteries (Receiver)
User Manual

Functions:

Ideal for inspecting:
• Compressed air or other gases (Do not use ULD-400-EUR for combustible gas leak detection)
• Plumbing
• Electrical and mechanical systems
• Valves, tanks and pipes
• Heat exchangers, boilers and condensers
• Air conditioning and refrigeration systems
• Motors and machinery

Key Features:

• 6.35 cm LCD display with bargraph
• 20 kHz to 90 kHz frequency range: optimal range for detecting a variety of leakage events
• Quality headphones to help identify the source of the leak
• Parabola accessory directs the ultrasound towards the sensor

Product Information

• Three filters to remove main noise frequencies in noisy environments
• Adjustable Receiver sensitivity and Three Transmitter signal strengths for accurate leak pinpointing
• Detachable Tubular Extension provides additional reach in hard to reach areas

ISSWWW and Beha-Amprobe - A Fluke Company

With a combined experience of over 100 years, well-known German brand Beha and US-based Amprobe have a track record to be proud of. Now we have joined forces, and together we are committed to making your job safer, faster and easier than ever. Our expertise is legendary. Almost 70 years ago in 1948, we invented the very first clamp meter, and we haven’t stopped innovating since.
The Amprobe brand has always remained a staple among our stockholding. It's pedigree and price point make the brand a quality offering that rival higher priced brands for comparable technology. You can trust Amprobe, thousands do. From multimeters to voltage detectors, at Beha-Amprobe we constantly improve our designs to provide you with the very best quality tools and support.

Beha-Amprobe ULD-410-EUR Ultrasonic Leak Detector Technical Specifications
	ULD-400-R Receiver
Sensitivity Adjustment	Yes
Volume Adjustment	Yes
Signal Level Adjustment	N/A
Earphone Jack (3.5 mm)	Yes
Display Size	LCD 2.5 in (6.35 cm)
Display Dimensions	1.45 x 1.93 in (36.72 x 48.96 mm)
Display Resolution	240(RGB) x 320 pixels
Display Type	TFT-LCD (262 K)
Display Color	True, 16bit/color
Frequency Range	20 kHz to 90 kHz
Filter	±5 KHz of main noise frequency, up to three filters
Power Supply	4 x 1.5 V AA (LR6) alkaline batteries
Power Consumption (typical)	75 mA
Battery Life (typical)	105 hours (Alkaline)
Low battery indication
Weight	Approx. 0.518 lb (0.235 kg)
Dimensions	7.547 x 2.984 x 1.791 in (183 x 75 x 43 mm)
APO function	60 minutes when in idle
Operating Temperature	-4 °F to 122 °F (-20 °C to 50 °C)
Storage Temperature	-4 °F to 158 °F (-20 °C to 70 °C)
Operating Humidity	<80% RH
Pollution Degree	2
Protection	IP40
Certifications
Electromagnetic Compatibility (EMC)	EN 61326-1 Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment) [1] [1] This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and is not to be used in homes.

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

UK Mainland

Standard FREE 1-2 Day Courier Delivery – UK Mainland only - Zones A & B

Included in the price for all orders over £75.00 (exc vat). Sent using express courier, delivered within 1-2 working days from the date of your order, subject to availability.

Next Day Before 10:30 (Excluding Saturday & Sunday) Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.

Next Day Before 12:00 Delivery (Excluding Saturday & Sunday) – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.

Saturday Before 10:30 Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered the next Saturday from the date of your order, subject to availability. (Order by 3:00pm the preceding Friday)

Saturday Before 12:00 Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered the next Saturday from the date of your order, subject to availability. (Order by 3:00pm the preceding Friday)

Saturday Anytime >6:00pm Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered the next Saturday from the date of your order, subject to availability. (Order by 3:00pm the preceding Friday)

Sunday Before 12:00 Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered the next Saturday from the date of your order, subject to availability. (Order by 3:00pm the preceding Friday)

Sunday Anytime up to 6:00pm Express Courier Delivery – UK Mainland only - Zones A & B
Sent by express courier, delivered the next Saturday from the date of your order, subject to availability. (Order by 3:00pm the preceding Friday)

Orders must be placed before 3:00pm for a qualifying next day delivery and a telephone number supplied, subject to availability.

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we need to apply a surcharge on all deliveries made in the following regions bringing the carriage charges to:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 2 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International Delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable E&OA

Beha-Amprobe ULD-410-EUR Ultrasonic Leak Detector

NEW The Beha-Amprobe ULD-410-EUR Ultrasonic Leak Detector detects air and gas leak emissions through ultrasonic sound waves, inaudible to the human ear.

Beha-Amprobe ULD-410-EUR Ultrasonic Leak Detector

The ultimate ultrasonic diagnostic tool for HVAC/R, mechanical and electrical inspection and troubleshooting

The ULD-410-EUR Comes Supplied With:

Functions: