Emlite MP22 RFID Pre-Payment Card Electricity Meter
- 100 Amp Rated
- Debt Collection Feature
- MID Approved
- Multi Tarriff
- RFID Pre-payment Card
- Single Phase
- Standing Charge Feature
- Timer Function
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Emlite MP22 RFID Pre-Payment Card Electricity Meter
Pre-payment the modern way with secure rechargeable payment cards
The MP22 RFID is a new Pre-payment card electricity meter that has been designed to replace the reconditioned Ampy 5028A and 5188 meters that are currently available. The MP22 is a newer version of the Emlite MP22 meter. This is the only MID certified card pre-payment meter available in today’s market. Using RFID technology (Radio-frequency identification), the credit from the pre-payment cards are transferred without the requirement to insert the card.This is a modern and ideal solution for Caravan Parks, Marinas and Rental Property.
The cards for this meter are re-usable and for small users (50 or less) we can recharge the cards at a small fee. For large users (50+) we can supply the Desktop Charger and software to allow you to recharge your own cards.
This meter is designed to be used for the control of the electricity supply in utility or secondary metered sites such as holiday and landlord accommodation. The meter is fully approved to the European metering standard, MID (Metering Instruments Directive). The meter is therefore tested and approved as accurate for billing purposes. The meter may also be used as a time controller.
Key Features:
- Pre-Payment Functionality
- MID B+D certified
- 2 Rate Tariff Option
- Friendly Non-Disconnect Times
- Emergency Credit Function
- Standing Charge Option
- Debt Recovery Option
- Optional ‘Timer Mode’
- Unique Card Codes to Prevent Fraud
- Recharegeable payment cards
The meter is programmed by using a programming card in conjunction with the red and blue buttons at the top of the meter.
The programming function allows the energy prices and standing charge to be set, whilst a debt collection facility enables
a pre-set amount to be collected daily.
The total amount for collection is programmed and the meter will reduce this each
day by collecting monies from the remaining credit balance. Additional card types are available to support a variety of
functions including new tenancy and servicing. Please contact your supplier for further information. An electronic display
indicates the amount of credit remaining on the meter.
This display is also used when programming energy prices, and
other meter settings. The grey push button next to the display allows the tenant / user to cycle through a set of displays
showing usage totals, charges, etc. A timer mode allows the meter to be used for the control of appliances and services
where the “on” time is set using a top up card that adds a time determined by the value of the card.
The amount of time added for a given card value can be programmed to a maximum value of 23h 59m per £/€1. When energy
is being consumed the red LED light below the display flashes 1000 times for every 1kWh used, or if no energy is being consumed is on permanently.
The meter has rechargeable top up cards at values of 1, 5, 10, 20 and 50. The cards work with RFID “contactless” technology; hold the card against the top left hand corner of the meter to apply the credit. The cards come charged with a single use available, once the value has been transferred to the meter, the card itself will need returning to the meter supplier for recharging
The meter’s default display shows the amount of credit or debt remaining to the user. For example: Cr 3.50 means a credit of £3.50 (or €3.50) is remaining. In timer mode the default display is the time remaining, or “OFF” when the timer has expired. When a top up card is introduced to and accepted by the meter, the card’s value is added to the meter’s credit, and the display momentarily shows Card XX (where XX is the card value), before returning to show the remaining credit or debt.
Please Note:
The pre-payment cards offered for sale on this page work ONLY with the Emlite MP22 RFID Pre-payment Meter detailed above purchased from isswww.co.uk.
Payment cards are regionally coded to the meter by the manufacturer and will not work with card of a different region coding.
If you are unsure please call us FREE on 0800 0224 060
Emergency Credit Function
If the end-user is unable to purchase new cards and the credit level falls below £/€1.00, they can press the “Emergency Credit A” button (red) and this will provide them with £/€3.00 credit. An ‘E’ will appear on the display indicating emergency credit has been added. Once the end-user has used all of the £/€3.00 emergency credit, the meter will disconnect the supply. Once the supply has been disconnected, the meter will show “dt 3.00E” indicating that the £/€3.00 of emergency credit will need to be added prior to the meter reconnecting the supply. Using the minimum value card, £/€5.00 will be added to the meter, £/€3.00 will be deducted, and the end-user will be left with £/€2.00 credit. The emergency credit function will now be restored. £/€3.00 is the default Emergency Credit value, this cannot be changed using the programming card. You can request that your meter supplier pre-sets it to a different value before purchasing, or alternatively you can purchase a Rate Setting card.
Spares and Accessories:
-
Emlite USB Contactless Card Charger & Software
-
Emlite RFID Pre-payment cards in multiples of 100
-
Emlite RFID Pre-payment cards in multiples of 1000
| Key Features | 100 Amp Rated, Debt Collection Feature, MID Approved, Multi Tarriff, RFID Pre-payment Card, Single Phase, Standing Charge Feature, Timer Function | ||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||||||||||||||||||
| Manufacturer | JW SmartMeters | ||||||||||||||||||||||||||||||||||||||
| Short Description |
Updated January 2024
Please note, our cut-off time is 2:00pmOrders requiring calibrationWhilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery. Bank/Public HolidaysPredicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order. *UK Mainland (Revised March 2021)
Delivery SurchargesBecause of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
Offshore ServicesAll offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles. International deliveryInternational delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk ExportAll export inquiries should be directed to the export division before placement of order. If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
Frequently Bought Together
Customers Who Bought This Item Also Bought
| ||||||||||||||||||||||||||||||||||||||
