- Features & Specification
HIKVISION ISD-SMG318LT-F Walk Through Temperature Scanner
Mass subject bodily temperature screening with metal detection for high traffic areas
ISD-SMG318LT-F walk-through metal detector, adopting the thermal imagery technology, realizes non- contact temperature measurement. Face detection function of the camera makes an accurate positioning of the measurement. The detector also supports metal detection. It is suitable for safety inspection of dangerous goods and is widely used in public occasions and important places, etc. It is recommended to be used indoor with a windless environment.
Thermal Imaging Key Features:
- Temperature exception detection
- Linkage for audible alarm
- Linkage of white strobe light alarm
Thermal Imaging Functions:
- Uncooled sensor, resolution: 160 x 120
- Supports AGC4.0, DDE, and 3DNR
- Supports dual-light fusion image
- Supports visible light and thermal imaging frame overlay
- 15 pseudo colours: white, black, red, etc.
Visible Light Functions:
- 4 MP, 1/2.7 “ CMOS, Max. resolution: 2688×1520@25fps
- Supports low bit rate, low latency and ROI
- Independent settings for day or night condition
- Dual-channel, single IP
- PoE power supply
- IP66 protective level
- Operation temperature: 5℃ to 40℃, ＜95% RH
- 10M/100M self-adapting network interface
- Micro SD/Micro SDHC/Micro SDXC card (128G/256G) slot
- 1-ch alarm input/output
- 1-ch audio input/output
- 1-ch 12 VDC power input
- Security verification, such as HTTPS, supports license creating
- Three level of users, IP address filtering, user and password authentication
Metal Detection Key Features:
- Detection accuracy: metal in the size like a clip (or 1/2 clip) is detectable on the middle of the detector. Goods like Belt buckle can be excluded. Copper, aluminum, and zinc (over 150 g) , controlled knife, and gun are detectable
- Anti-interference: multiple detector can work abreast at the same time
- Multi-area alarm: Indicates the metal position on the body. Max. 18 areas
- Frequency settings: 100 frequencies can be set, and different ring tone for different frequency
- Sensitivity Settings: 255 level of sensitivity can be set
- People counting: display the number of walk-through people and people in alarm
- Positioning LED: LEDs on the sides of the detector for indicating the position of the prohibited goods.
- LCD screen
- Storing sensitivity parameters for different scenes for shortcut settings.
- Material: PVC shell
HIKVISION Case Studies:
Two case studies available as supplied by HIKVISION.
Case study 1, HIKVISION thermal technology in action - Care Home.
Case study 2, HIKVISION thermal technology in action - Place of Work.
Hikvision is a world leading provider of security products and solutions. Featuring an extensive and highly skilled R&D workforce, Hikvision manufactures a full suite of comprehensive products and solutions for a broad range of vertical markets. In addition to the security industry, Hikvision extends its reach to smart home tech, industrial automation, and automotive electronics industries to achieve its long-term vision. Hikvision products also provide powerful business intelligence for end users, which can enable more efficient operations and greater commercial success.
HIKVISION ISD-SMG318LT-F Technical Specification
|Sensor||Vanadium oxide uncooled sensor|
|Max. Resolution||160× 120|
|Response Waveband||8 to 14μm|
|NETD||≤ 40mk(@25°C, F#=1.0)|
|Lens (Focal Length)||3mm|
|Field of View||50° × 37.2°|
|Min. Focusing Distance||0.5m|
|Pseudo Colour||15, white heat, black heat, fusion1, rainbow, fusion2, iron oxide red1, iron oxide red2, puce, color1, color2, ice & fire, rain, red heat, green heat, & dark blue|
|Sensor||4 MP 1/2.7" Progressive Scan CMOS|
|Resolution||2688 × 1520 @ 25fps|
|Min. illuminance||0.0018Lux @ (F1.6,AGC ON), 0 Lux with IR|
|Shutter speed||1/3s to 1/100,000s|
|Field angle||84.0° × 44.8°|
|IR distance||Max. 15 m|
|Thermal imaging & visible light||Thermal imaging integrated with visible light frame|
|Picture in picture||Supports visible light & thermal imaging frame overlay|
|Smart information overlay||Supports (only temperature measurement rule & temperature are supported)|
|Linkage alarm||Linkage of strobe light & audible alarm|
|Temperature exception detection||Expert mode: 10 pints, 10 frame, 21 rules on each line|
|Body temperature measurement||AI face detection, multi-target detection|
|Measurement range||30 to 45℃|
|Temperature Alarm||Alarm triggered when the temperature is over the threshold|
|Measurement accuracy||No black body:±0.5℃|
|With black body: ±0.3℃|
|Video compression||H.265 / H.264/M JPEG|
|H264:||Baseline Profile / Main Profile / High Profile|
|Video bit rate||32 Kbps to 8 Mbps|
|Video standard||G.711 / G.722.1 / G.726 / MP2L2 / PCM|
|Audio bit rate||64Kbps (G.711) / 16Kbps (G.722.1) / 16Kbps (G.726) / 32-192Kbps (MP2L2)|
|SD card storage||Micro SD / Micro SDHC / Micro SDXC card (128GB or 256GB)|
|NVR storage||(96/86/77/76）I series NVR|
|Supports live view/playback, rule display, alarm report, & remote configuration|
|Main stream||Visible light: 50Hz: 25fps (1920 × 1080), 25fps (1280 × 960), 25fps (1280 × 720)|
|Visible light: 60Hz: 30fps (1920 × 1080), 30fps (1280 × 960), 30fps (1280 × 720)|
|Thermal Imaging: 25fps (160 × 120 (output320 × 240))|
|Sub stream||Visible light: 50Hz: 25fps (704 × 576), 25fps (640 × 480)|
|Visible light: 60Hz: 30fps (704 × 480), 30fps (640 × 480)|
|Thermal Imaging: 25fps (160 × 120 (output 320 × 240))|
|Network protocol||IPv4/IPv6, HTTP, HTTPS,802.1x, Qos, FTP, SMTP, UPnP, SNMP, DNS, DDNS, NT|
|P, RTSP, RTCP, RTP, TCP, UDP, IGMP, ICMP, DHCP, PPPoE, Bonjour|
|Interface protocol||ONVIF (PROFILE S,PROFILE G), ISAPI, SDK, Ehome, GB28181|
|Max. live view channel number||20|
|User||Three level: administrator, operator, general user|
|Safety strategy||User & password authentication, HTTPS encryption, IEEE 802.1x control, IP address filtering|
|Alarm input||1, 0 to 5 V alarm input|
|Alarm output||1, NO relay output, alarm type configurable|
|Audio input||1, 3.5mm Mic in/Line in interface. Line input: 2-2.4V[p-p]|
|Audio output||1, 600Ω|
|Network interface||1,RJ45 10/100M self-adaption|
|SD card slot||1|
|Browser||IE7+, Chrome18+, Firefox5.0+, Safari5.02+|
|Power supply||110~240VAC, 50-60Hz|
|Operation temperature & humidity||Speed dome: 5℃ to 40℃, ＜95% RH Walk-through detector: -20℃ to 85℃, 99%, RH|
|Protective level||Dome camera: IP66|
|Walk-through detector: IP53|
|Detector dimension(without dome camera)||2200 x 850 x 480mm (H x W x D)|
|Dome camera dimension||138.3 mm × 138.3 mm × 123.1 mm (H x W x D)|
|Package dimension||2270 x 700 x 230mm (H x W x D)|
Updated March 2021
During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time so we have taken the decision to
temporarily limit our services rather than let our customers down. We hope you will understand our position on this and we apologize unreservedly for the inconvenience we know it will cause.
Please note that ALL orders placed before 3:00pm are shipped same-day (unless additional services are required).
The stated transport times above have some scope for adjustment built-in for the Covid-19 situation. Carriers themselves also have their own extended workload and limitations at this time which are beyond our control.
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
|Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT - Order by 3:0pm||FREE|
|Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT - Order by 3:0pm||£4.75|
|Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 3:0pm||£7.75|
|Saturday ANYTIME Delivery - Order by 3:0pm||£9.95|
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at email@example.com
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable.