Fluke FL-120 EX Intrinsically Safe Flashlight
- Batteries Included
- Zone 1 Certified
- UL certified
- IP6X rated
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
Fluke FL-120 EX Intrinsically Safe Flashlight
Fluke, the largest supplier of intrinsically safe measurement tools, expands its line of EX products with the Fluke Intrinsically Safe Flashlights. In hazardous, potentially explosive work zones, safety is the main concern. The new flashlights are great for general purpose lighting, but also offer a design specific for safe use in hazardous work sites in oil and gas, petrochemical, pharmaceutical processing, mining, paint shops, and other potentially explosive areas. Offer your customers the complete intrinsically safe portfolio of Fluke products.
The Fluke FL-120 EX Instrinsically Safe Flashlight, offers a max of 120 lumens and two settings to illuminate work areas in hazardous zones. The intrinsically safe IP67 rating provides protection in the field. The FL-120 EX features an ergonomic design with an overmolded rubber grip and a push-button for high and low light modes.
UL certified – CLASS I DIV 1&2 GRP ABCD; CLASS II DIV 1&2 GRP EFG
Class I, Division 1 classified locations. An area where ignitable concentrations of flammable gases, vapors or liquids can exist all of the time or some of the time under normal operating conditions. A Class I, Division 1 area encompasses the combination of Zone 0 and Zone 1 areas.
Class I, Division 2 classified locations. An area where ignitable concentrations of flammable gases, vapors or liquids are likely to exist under normal operating conditions. As a guide for Zone 1, this can be defined as 10–1000 hours/year or 0.1–10% of the time.
Key Features:
- Light Output: High: 120 lumens, Low: 30 lumens
- Beam Distance: High: 200 meters, Low: 100 meters
- Light modes: High/Low/Off
- Run Time: High: 6 hours, Low: 69 hours
- Battery Size: 4xAAA
- Light Source: Cree XP-E LED
- IP Rating: IP6X
- Intrinsically safe
FL-45 EX Intrinsically Safe Flashlight |
FL-120 EX Intrinsically Safe Flashlight |
FL-150 EX Intrinsically Safe Flashlight |
HL-200 EX Intrinsically Safe Headlamp |
|
| Light Modes | On/Off | High/Low/Off | High/Low/Strobe/Off | High/Low/Off |
| Light Output | 45 Lumens | High: 120 Lumens Low: 30 Lumens |
High: 150 Lumens Low: 60 Lumens |
High: 200 Lumens Low: 100 Lumens |
| Beam Distance | 40 Meters | High: 200 Meters Low: 100 Meters |
High: 110 Meters Low: 80 Meters |
High:100 Meters Low: 75 Metes |
| Run Time | 20 hours | High: 6 hours Low: 69 hours |
High: 8 hours Low: 30 hours |
High: 5 hours Low: 12 hours |
| Battery Size | 2 x AAA | 4 x AA | 4 x AA | 3 x AAA |
| Light Source | Cree XP-G2 LED | Cree XP-E LED | Cree XP-G2 LED | Cree XP-G2 LED |
| IP Rating | IP67 | IP6X | IP67 | IP67 |
| Weight | 41 g | 115 g | 140 g | 130 g |
| Dimensions | 142 x 30 x 26 mm | 174 x 47 x 47 mm | 172 x 47 x 47 mm | 80 x 50 x 45 mm |
| Warranty | 1 Year | 1 Year | 1 Year | 1 Year |
About Intrinsically Safe Products
Products that appear on this website that are listed as or relate to a classification of intrinsic safety are titled and described according to our best understanding and/or interpretation of the complex and sometimes changing criteria governing such classification as set out by the Health and Safety Executive.
Please note that due to the volatile nature of the intended use of products in this category, neither UK Test Instruments or Instrument Sales and Services isswww.co.uk can be held responsible for any incident that arises from the purchase or use of any product described within this web site. For more information please visit the Health and Safety Executive web site with specific regard to Hazardous Area Classification and Control of Ignition Sources.
ISSWWW and Fluke Instruments
Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software.
Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. Every new manufacturing plant, office, hospital, or facility built today represents another potential customer for Fluke products.
From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Typical customers and users include technicians, engineers, meteorologists, medical-device manufacturers, and computer network professionals, people who stake their reputations on their tools, and use tools to help extend their personal power and abilities.
Fluke are a founding core supplier of ISSWWW and we enjoy a personal and professional relationship with them. Our sales staff and our technicians are Fluke trained and we hold perhaps the largest stock of their products in the country. Our customers know that when it comes to Fluke products, we have not only the best prices but the best advice and support services, reassuring when you need to make that all important purchase.
| Key Features | Batteries Included, Zone 1 Certified, UL certified, IP6X rated | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | ||||||||||||||||||||||
| Manufacturer | Fluke Testers | ||||||||||||||||||||||
| Short Description |
|
||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA