The images provided are for illustrative purposes only. Please refer to product description.

FLIR E4 Infrared Camera with MSX and Wi-Fi

The Flir E4 is Flir's entry level thermal imaging camera, now with Wi-Fi.

0 Review(s) Add Your Review

Next Day Delivery (subject to availability)

£905.00 excluding VAT £1,086.00 including VAT @ 20%

Wi-Fi Connectivity
Manufacturer Certificate Included
Entry level camera
80 x 60 pixels
Built-in digital camera
Software included
MSX Technology

Add Certificate Of Calibration?

Required Fields

Qty:

Confirm Availability
Calibration Info

Information on calibration of newly purchased equipment and what it means to you.

Calibration and it's certification comes in varying forms on new equipment and in this section we will break it down into the three areas that we use to classify calibration state at the point of purchase.

Manufacturers Calibration Certificate

This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as a end of line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your companies name on and don’t always show proven test results.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.

Manufacturers Certificate of Conformity

A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within it's intended application, it has no traceable certificate or constitute any defined results for accuracy before leaving the manufacturing process.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.

FREE personalised traceable calibration certificate

This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your companies details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.

Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.

This instrument comes with a FREE personalised traceable calibration certificate. This equipment is supplied by the manufacturer with a basic statement of conformity. We have upgraded the equipment to include a full personalised traceable calibration certificate for you in our laboratory at our expense.
You are advised to renew your calibration annually.

Where offered this can be identified by the logo below:
Call Me Back
Seen it cheaper? Click Here

Description
Features & Specification
Resources
Delivery

FLIR E4 Thermal Imaging Camera with MSX and Wi-Fi

A feature rich and extremely affordable thermal imaging camera

FLIR Ex-Series thermal imaging cameras are ideal for electrical and mechanical inspections where their ability to detect potential problem areas mean that installations can be quickly and easily inspected and breakdowns avoided. Building inspectors will also rapidly discover the benefits of the FLIR Ex-Series as they are ideal for detecting insulation losses, inspection under floor heating and many other building related anomalies.

FLIR Ex-Series cameras are easy-to-use thermal imaging cameras that give the user access to a new dimension in inspection capability. An affordable replacement for a spot pyrometer, they provide a thermal image with temperature information on every pixel. A FLIR thermal imaging camera can scan an entire area, never missing a potential problem area, no matter how small it might be.

Outstanding ease-of-use

With a fixed focus –free lens, FLIR Ex-Series are extremely simple to operate. Designed for entry-level users, and measuring temperatures up to +250C, they produce instant, ‘point-and-shoot’ JPEG thermal imagery with all required temperature data included.

Visual camera and FLIR patented MSX

A built-in visual camera makes observing and inspecting faster and easier, as the visual image can be used as a reference against the thermal image. FLIR’s patented MSX-technology provides thermal images of exceptional quality in real time. This results in sharper-looking thermal images, quicker target orientation and clutter-free reports.

Different models: lightweight and easy to carry

	FLIR E4	FLIR E5	FLIR E6	FLIR E8
Built in visual camera	Yes	Yes	Yes	Yes
FLIR MSX technology	Included	Included	Included	Included
Thermal image quality	80 x 60 pixels	120 x 90 pixels	160 x 120 pixels	320 x 240 pixels
Temperature differences as small as	0.15	0.10	0.06	0.06
Analysis	Spotmeter	Spotmeter Area with max/min	Spotmeter Area with max/min Color alarm; Blue below/red above Set temperature	Spotmeter Area with max/min Color alarm; Blue below/red above Set temperature

About FLIR

FLIR Systems - The World's Sixth Sense

FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. We bring innovative sensing solutions into daily life through our thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems. Our products improve the way people interact with the world around them, enhance public safety and well-being, increase energy efficiency, and enable healthy and entertained communities.

FLIR E4

FLIR E5

FLIR E6

FLIR E8

Imaging and Optical Data
Infrared (IR) Resolution	80 x 60 pixels	120 x 90 pixels	160 x 120 pixels	320 x 240 pixels
MSX Resolution	320 x 240 pixels
Thermal Sensitivity	<0.15°C	<0.10°C	<0.06°C
Field of View	45 x 34°
Focus	Focus-free
Detector	Uncooled microbolometer
Screen	3.0 inch, 320 x 240 pixel colour LCD
Frame Rate	9Hz
Analysis
Image Modes	IR image, visual image, MSX, thumbnail gallery		IR image, visual image, MSX, picture-in-picture, thumbnail gallery
Multi Spectral Dynamic Imaging (MSX)	IR image with enhanced detail presentation
Picture-In-Picture	N/A		IR area on visual image
Temperature Range	-20 to 250°C (-4 to 482°F)
Accuracy	±2% or 2°C
Measurement Modes	Spot (center) mode	2 modes: 1 spot (center) and 1 area box (MIN/MAX)	3 modes: 1 spot (center), 1 area box (MIN/MAX), isotherm (above/below)
Alarm	N/A	N/A	Blue below or red above set temperature
Emissivity Correction	Variable from 0.1 to 1.0
Setup
Colour Palettes	Iron, Rainbow or Grey
Setup Commands	Local adaptation of units, language, date and time formats
Image Storage
Storage Capacity	Internal memory stores at least 500 sets of images
Storage Mode	Simultaneous storage of images in IR, visual and MSX
File Formats	Standard JPEG, 14-bit measurement data included
Other
Battery Type/Operating Time	4 hours approx
Weight	1.27lbs (0.575kg)
Drop Test	2m (6.6ft)
Warranty	2-5-10 warranty - requires registration with FLIR 2 years parts and labor on camera 5 years coverage on battery 10 years coverage on detector

There are no files associated with this product. For more information please call 0800 0224 060

Orders requiring calibration

Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.

Bank/Public Holidays

Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.

*UK Mainland (Temporarily revised June 2020)

Please note that regrettably, we have had to realign our delivery service options to those available from our carriers.
During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time.
We have taken the decision to temporarily limit our services rather than let our customers down.
We hope you will understand our position on this and we apologise unreservedly for the inconvenience we know this will cause.
We look forward to restoring our full delivery service schedule just as soon as we are able.

Standard FREE 1-2 Day Courier Delivery – UK Mainland only - Zones A & B

Included in the price for all orders over £75.00 (exc vat). Sent using express courier, delivered within 1-2 working days from the date of your order, subject to availability.

Next Day Anytime Delivery (Excluding Saturday & Sunday) – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.

Orders must be placed before 3:00pm for a qualifying next day delivery and a telephone number supplied, subject to availability.

New Postage Map Sept 2018>

Delivery Surcharges

Because of the high cost of carriage, we need to apply a surcharge on all deliveries made in the following regions bringing the carriage charges to:

Zones A & B - Mainland delivery rates apply.
Zone C - Scottish Highlands (Charges are calculated at the checkout).
Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
Zone E - Northern Ireland (Charges are calculated at the checkout).
Zone F - Republic of Ireland (Charges are calculated at the checkout).

Offshore Services

All offshore deliveries are a 2 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.

International Delivery

International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk

Export

All export inquiries should be directed to the export division before placement of order.

If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable E&OA

FLIR E4 Infrared Camera with MSX and Wi-Fi

The Flir E4 is Flir's entry level thermal imaging camera, now with Wi-Fi.

Our Discount Guarantee

FLIR E4 Thermal Imaging Camera with MSX and Wi-Fi

A feature rich and extremely affordable thermal imaging camera