FLIR DM285 Imaging Multimeter
- Built-in Laser Pointer
- Thermal Range -10 °C to +150 °C
- 160 x 120 pixels
- Three Selectable Colour Palettes
- Switch Between °F and °C
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
FLIR DM285 Imaging Multimeter
The FLIR DM285 Thermal Imaging Multimeter is a handy combination of a thermal imager and an advanced electrical measurement instrument with additional wireless and datalogging features. It can measure AC/DC voltage (1000V), AC/DC current (10A), resistance (50MΩ), capacitance (10mF) and frequency (100kHz) with further options for continuity and diode testing. It is also compatible with a type K thermocouple to measure temperature from -40˚C to 400˚C whilst a µA range can test flame sensors. The multimeter also boasts True RMS, LoZ voltage measurement and a VFD voltage measurement function.
The 160 x 120 pixel thermal sensor provides sharp thermal images by measuring temperature between -10˚C to 150˚C with ±3˚C accuracy. Thermal sensitivity of ≤150mK means that small temperature differences (0.15˚C) can be depicted on screen and the 50˚ x 38˚ field of view allows sharp focus at very short distances. Fixed focus and automatic ranging ensures that the FLIR DM285 provides the user with clear, useful thermal image.
The vibrant 2.8” colour screen shows thermal images in one of three palettes (iron, rainbow, greyscale) and provides the user with a digital temperature read out as well as a range indication. It has a wide angle design that can be viewed very easily and there is also min/max/average recording and a useful data hold function. Ranging is usually automatic but the user can take manual control if needed. The function is selected by the clearly-labelled dial and it is easy to navigate the intuitive onboard menu.
The DM285 Comes Supplied With:
- FLIR DM285 Multimeter with Infrared
- TA80 premium test leads
- Type K temperature probe (400 °F, 204 °C)
- 3 × AA Energizer batteries
- User manual/CD
Key Features:
- Thermal imaging allows you to quickly scan for overheating system components, then use the DMM test functions to troubleshoot and diagnose the fault
- Wirelessly connect to the FLIR InSite professional workflow management tool to streamline inspections and simplify data collection, sharing, and reporting
- Onboard data storage for both electrical parameter data and thermal images
- 18-function DMM including VFD mode, true RMS, LoZ, NCV, a built-in work light, and a laser pointer
- Measures voltage, current, frequency, resistance, continuity, diode, capacitance, and temperature
FLIR DM285-FLEX-KIT
The Flex Kit contains the FLIR TA74 Universal Flexible Current Probe Accessory which measures AC current from 0 to 3000A with three separate ranges - 30A, 300A, and 3000A - that have resolutions of 0.01A, 0.1A and 1A respectively. It has a 45cm flexible coil which can be threaded and wrapped around cables in awkward spaces. It is attached to the FLIR DM285 via the 1.9m connector cable.
The final main part of the FLIR DM285 Flex Kit is the tough FLIR TA10-F Case that can shield all the components of the kit. It has separate components for the multimeter, flexible current camp and other accessories. Test leads and a thermocouple are provided as standard and the FLIR DM285 is covered by a ten-year warranty.
Kit Contents:
- FLIR DM285 Thermal Imaging Multimeter
- FLIR TA74 Flexible Current Probe
- FLIR TA10-F Carry Case
- TA80 silicone test leads
- Type K thermocouple
- 3 x AA batteries
- User manuals/CDs
About FLIR
FLIR Systems - The World's Sixth Sense
FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. We bring innovative sensing solutions into daily life through our thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems. Our products improve the way people interact with the world around them, enhance public safety and well-being, increase energy efficiency, and enable healthy and entertained communities.
| Key Features | Built-in Laser Pointer, Thermal Range -10 °C to +150 °C, 160 x 120 pixels, Three Selectable Colour Palettes, Switch Between °F and °C | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product Stock Status | Next Day Delivery (subject to availability) | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Manufacturer | FLIR | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Short Description |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
| Service | Price |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
| Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
| Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
| Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA