FLIR CM83 TRUE RMS Power Clamp
- 37mm Jaw Size
- Bluetooth Connectivity
- MeterLink™ Connectivity
- Resistance Measurement
- Diode Testing
-
-
Information on the calibration of newly purchased equipment and what it means to you.
Calibration and its certification comes in varying forms on new equipment and in this section, we will break it down into the three areas that we use to classify calibration state at the point of purchase.
Manufacturers Calibration Certificate
This is a calibration certificate offered by the manufacturer supplied with the tester. This is also known as an end-of-line certificate or manufacturer’s certificate. These certificates vary depending on the manufacturer and product. They will not have your company's name on them and don’t always show proven test results.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes complete with the manufacturer's calibration certificate. Please be aware that these certificates are generic and may also be time-lapsed.
If you would prefer a personalised full traceable calibration certificate applied to the equipment before dispatch, then please select this option from the drop-down menu above, an additional calibration charge will apply.Manufacturers Certificate of Conformity
A manufacturer's certificate of conformity is not a calibration certificate. It is merely a statement that the equipment has been produced to operate within its intended application, it has no traceable certificate or constitutes any defined results for accuracy before leaving the manufacturing process.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
This instrument comes with a ‘manufacturer's certificate of conformity’. It is important to understand that this does NOT constitute a ‘calibration certificate’. A certificate of conformity merely states that the equipment has been designed and produced to meet the requirements of its intended application.
Where calibration of an instrument is possible we will offer this as a separately purchasable item and may be selected from the drop-down box above. You will be sent a full traceable calibration certificate produced in our laboratory and applied with your details as required.Personalised traceable calibration certificate from isswww
This is a calibration certificate created by us at ISS. This certificate is fully traceable to national and international standards. The certificate will show your company's details, tester information, proven test results and the equipment used to carry out the test. Nearly 90% of all calibrations we do are done in-house in one of our many fully equipped laboratories. You can add this service to your order on the product page before you checkout.
Where applicable we will include the following statement relating to the item/s on the products page under the heading *Important Calibration Information.
We are on occasion able to offer FREE calibration on certain products at their point of sale (newly purchased equipment only) please look out for the following badge on the product's page to take advantage of this free offer.
-
-
FLIR CM83 TRUE RMS Power Clamp
The FLIR CM83 is an industrial-grade power clamp meter engineered with advanced power analysis, harmonics measurements, and variable frequency drive (VFD) filtering functions to meet the needs of electrical troubleshooters. The meter features Bluetooth® technology to connect compatible mobile devices for remote viewing and sharing, and METERLiNK® technology to wirelessly embed electrical readings into radiometric infrared images on compatible FLIR thermal cameras.
Measuring True RMS AC/DC current to 599.9A and voltage to 999.9V, the CM83 also features a harmonics mode to locate noise from different electrical draws to realign harmonics and reduce electromechanical equipment stress, as well as Phase rotation, allowing the analysis of three-phase systems, measuring power draw and verifying if power is evenly balanced.
With integrated non-contact voltage detection to ensure safety, the CM83 also provides bright dual-LED worklights to illuminate dimly lit environments, negating the need for an additional flashlight.
In addition the CM83 also offers a range of useful time-saving features, including min/max/average reading and data/relative/peak hold functionality, plus DCA Zero function and auto power off to conserve battery life.
Designed with safety and reliability in mind, the CM83 is manufactured in a double-moulded case with extra thick rubber on the corners, making the instrument more robust and shock-resistant. The CM83 is categorised as CAT IV 600 / CAT III 1000V and comes packaged with CAT IV silicon test leads and a limited lifetime warranty, again demonstrating this focus.
The CM83 Comes Supplied With:
- Fluke CM83 Power Clamp Meter
- 6 x AAA Batteries
- User Manual/CD
- CAT IV Silicon Test Leads
- Limited Lifetime Warranty
Key Features:
- VFD Mode Provides superior accuracy for working on VFD-controlled equipment.
- Advanced power efficiency and harmonics measurements for system level performance analysis
- Powerful work lights not only assist with clamping but are bright enough to serve as a primary work light.
- FLIR Tools Mobile connects the FLIR CM83 to your comparable smartphone and tablet via Bluetooth
- METERLiNK® technology wirelessly integrates electrical readings on your infrated image with FLIR Thermal Cameras
- Voltage and Current
- Bright White LED Backlight
- Analog Bargraph
- Power Factor
- Phase Rotation
- Integrated Non-Contact Voltage Detector
- Min, Max, and Average readings
- Auto Power Off
- Data Hold, Relative, Peak Hold, and DCA Zero functions
- On-Screen Battery Status
FLIR Comparison Table
CM82 | CM83 | CM85 | Basic Accuracy | |
AC/DC CURRENT | 600A | 600A | 1000A | ±2% |
AC/DC VOLTAGE | 1000V | 1000V | 1000V | ±1% / 0.7% |
AC VFD VOLTAGE | 1000V | 1000V | 1000V | ±1% |
HARMONICS | 1ST-25TH ORDER | 1ST-25TH ORDER | 1ST-25TH ORDER | ±5% |
TOTAL HARMONIC DISTORTION | 0.0 TO 99.9% | 0.0 TO 99.9% | 0.0 TO 99.9% | ±3% |
INRUSH CURRENT | 600ACA (Integration Time 100ms) | 600ACA (Integration Time 100ms) | 1000ACA (Integration Time 100ms) | ±3% |
ACTIVE POWER | 10kW to 600kW (10V, 5A min) | 10kW to 600kW (10V, 5A min) | 10kW to 1000kW (10V, 5A min) | ±3% |
DIODE TEST | 0.4 to 0.8V | 0.4 to 0.8V | 0.4 to 0.8V | ±0.1V |
CAPACITANCE | 3.999mF | 3.999mF | 3.999mF | ±1.9% |
RESISTANCE | 99.99kΩ | 99.99kΩ | 99.99kΩ | ±1% |
CONTINUITY THRESHOLD | 30Ω | 30Ω | 30Ω | ±1% |
FREQUENCY | 20.00Hz to 9.999kHz | 20.00Hz to 9.999kHz | 20.00Hz to 9.999kHz | ±0.5% |
BLUETOOTH RANGE MAX | 32ft (10m) | 32ft (10m) | ||
JAW OPENING | 1.45in (37mm, 1000MCM) | 1.45in (37mm, 1000MCM) | 1.77in (45mm, 1500MCM) | |
CATERGORY RATING | CAT IV-600V, CAT III-1000V | |||
BATTERY TYPE | 6 x AAA | |||
WARRANTY | Limited Lifetime (When registered within 60 days of purchase.) |
About FLIR
FLIR Systems - The World's Sixth Sense
FLIR Systems, Inc. designs, develops, manufactures, markets, and distributes technologies that enhance perception and awareness. We bring innovative sensing solutions into daily life through our thermal imaging systems, visible-light imaging systems, locator systems, measurement and diagnostic systems, and advanced threat detection systems. Our products improve the way people interact with the world around them, enhance public safety and well-being, increase energy efficiency, and enable healthy and entertained communities.
Key Features | 37mm Jaw Size, Bluetooth Connectivity, MeterLink™ Connectivity, Resistance Measurement, Diode Testing | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer | FLIR | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Short Description |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||
Product Stock Status | Next Day Delivery (subject to availability) |
Updated January 2024
Please note, our cut-off time is 2:00pm
Orders requiring calibration
Whilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring calibration may on occasion miss dispatch that day, according to the complexity of the calibration.Be assured they will ship on the next dispatch this in most cases should not add more than 24 hours to your delivery.
Bank/Public Holidays
Predicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scopeof our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Revised March 2021)
Service | Price |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value OVER £75.00 ex VAT | FREE |
Standard FREE 2-3 Day Courier Delivery – UK Mainland only - Zones A & B - Order value UNDER £75.00 ex VAT | £4.95 |
Next WORKING Day (excludes Saturdays, Sundays and public holidays) – UK Mainland only - Zones A & B - ANY order value - Order by 2:00pm | £7.75 |
Saturday ANYTIME Delivery - Order by 2:00pm | £9.95 |
Delivery Surcharges
Because of the high cost of carriage, we regretfully need to apply a surcharge on all deliveries made in the following regions:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
Offshore Services
All offshore deliveries are a 3-4 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at sales@isswww.co.uk
Export
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to discuss your requirements.
All stated prices are subject to VAT at the current rate where applicable.
E&OA