- Features & Specification
Chauvin Arnoux PEL102 Power & Energy Logger
Control Your Consumption- Save energy!
Ergonomic, magnetized and suitable for all types of cabinets, PEL102 loggers provide all the power and energy measurements simultaneously. Optimize your energy efficiency with PEL100 Power and Energy Loggers. Offering much more than simple energy metering, our PEL100 electrical measuring instruments record electrical consumption while measuring and analysing the power supplied.
Two different models, both just as simple to use.
With or without a display! The PEL100 Series contains two models: both measure, record and analyse all the important energy data.
PEL100 Power and Energy Loggers enable you to monitor your installations in order to identify potential areas for improvement, optimize your energy performance and achieve significant savings.
- Single-phase, split-phase and three-phase installations with or without a neutral, as well as other complex configurations,
- Implementation without cutting off the mains power supply,
- Class 02 portable electricity meter,
- Bluetooth, Ethernet and USB communication,
- Automatic recognition of the sensors connected,
- Recording on SD and SD-HC cards
- Real-time communication with a PC and analysis using PEL Transfer
- Chauvin Arnoux PEL102 Base Model ( no clamps) P01157152
- Chauvin Arnoux PEL102 + MA193 miniFLEX Clamps P01157150
Measuring the savings:
When installed for long periods as fixed instruments in cabinets, PEL100 loggers constantly monitor all the active, apparent and reactive power values on the electrical network. Any threshold overruns can then be detected instantly.
With the DataView® software for automatic generation and printing of reports, balance sheets, graphs and summaries, users can act quickly on the cause of this overconsumption , which will lead to higher bills. Indeed, any overruns of the subscribed power will lead to higher bills.
- 0.2 % accuracy class
- Measurement of power indices, PF, THD, hour meter, min/max, etc.
- Measurement of all power values
- Measurement from DC up to 400 Hz
- Energy measurement and costing
- Voltage up to 1,000 V
- Communication via Ethernet, Bluetooth and SD card
- Simple to set up without opening the electrical network
- Configuration in record time
- Recording on SD card
PEL TRANSFER, the dedicated software for the PEL100. The measurement results are recovered from the PEL100 via a USB, Bluetooth or Ethernet link, or by means of the SD card with the PEL Transfer software. This application software can be used for:
Configuration of the PEL100
Verification of the connections before beginning recording
Downloading of the measurements recorded in the PEL100
Display of the various results of the measurements and analyses
Spares & Accessories (Not Supplied):
Pole Mounting Kit P01102146
Reeling Box P01102149
Magnetised Voltage Probes P01103058Z
PEL* Bag no.23 120x300x60cm P01298078
PEL* Kit 4 crocodile clips & banana leads P01295476
PEL* Adapter to power PEL using Voltage inputs P01102134
|Chauvin Arnoux PEL102 Power & Energy Logger|
|Installation Types||Single Phase, Split Phase, Three Phase with or without neutral
and many other specific configurations
|Number of Channels||3 voltage inputs/ 3 current inputs
calculation of neutral current
|Network Frequency||DC, 50Hz, 60Hz and 400Hz|
|Voltage Range||10 to 1000V AC/DC/ ±0.2% + 0.5V|
|Current Sensors Supported|
|MN93||2 to 240A AC / ±1.2& + 1A|
|MN93A||0.005A AC to 5A AC / ±1.2% + 2mA
0.1A AC to 120A AC / ±1.2% + 2mA
|C193||3A to 1200A AC / ±0.5%|
|A193 & MA193||200mA to 10kA AC / ±1.2% + 70mA|
|PAC93||10A to 1000A AC / ±1.7% + 1A
10A to 1400A AC / ±1.7% + 1A
|E3N||50mA to 10A AC/DC / ±3.2% + 70mA
100mA to 100A AC/DC / ±3.2% + 70mA
|Voltage Ratio / Current Ratio||Up to 650000V / up to 25000A|
|Power||from 10W to 10GW / from 10 var to 10Gvar / from 10VA to 10GVA|
|Energy||Up to 4EWh / 4 Evarh / 4EVAh (e + 1018)|
|Phase||Cos, tan, pf|
|Harmonics||Up to the 50th order|
|Sampling / Acquisition Rate / Aggregation||128S/period - 1 measurement per second - from 1 min to 60 min|
|Memory||SD card (SD-HC up to 32GB)|
|Communication||Bluetooth (Class 2), Ethernet, USB|
|Power Supply||110V to 250V (+10% - 15%) @ 50-60Hz and 400Hz|
|Safety||IEC 61010 600V CAT IV - 1000V CAT III|
|Dimensions||256 x 125 x 37mm without sensor|
|Casing||IP54, UL (pending)|
Orders requiring calibrationWhilst we take the greatest care to get all orders dispatched and delivered to you in the stated time frame, orders received PM and requiring
calibration may on occasion miss dispatch that day, according to the complexity of the calibration. Be assured they will ship on the next dispatch
this in most cases should not add more than 24 hours to your delivery.
Bank/Public HolidaysPredicted delivery times are based on regular trading days Monday to Friday. Public holidays, bank holidays and weekends are outside the usual scope
of our dispatch and subject to activities/holidays of our carriers and therefore may incur additional days lead time to your order.
*UK Mainland (Temporarily revised June 2020)
Please note that regrettably, we have had to realign our delivery service options to those available from our carriers.
During the current situation surrounding the effects of the Coronavirus pandemic, logistics from every company are under immense pressure to deliver goods on time.
We have taken the decision to temporarily limit our services rather than let our customers down.
We hope you will understand our position on this and we apologise unreservedly for the inconvenience we know this will cause.
We look forward to restoring our full delivery service schedule just as soon as we are able.
Standard FREE 1-2 Day Courier Delivery – UK Mainland only - Zones A & B
Included in the price for all orders over £75.00 (exc vat). Sent using express courier, delivered within 1-2 working days from the date of your order, subject to availability.
Next Day Anytime Delivery (Excluding Saturday & Sunday) – UK Mainland only - Zones A & B
Sent by express courier, delivered next day (excluding weekends) from the date of your order, subject to availability.
Orders must be placed before 3:00pm for a qualifying next day delivery and a telephone number supplied, subject to availability.
Because of the high cost of carriage, we need to apply a surcharge on all deliveries made in the following regions bringing the carriage charges to:
- Zones A & B - Mainland delivery rates apply.
- Zone C - Scottish Highlands (Charges are calculated at the checkout).
- Zone D - Outer Hebrides, Orkney Isles, Shetland Isles, Isle of Man, Scilly Isles, and Channel Islands (Charges are calculated at the checkout).
- Zone E - Northern Ireland (Charges are calculated at the checkout).
- Zone F - Republic of Ireland (Charges are calculated at the checkout).
All offshore deliveries are a 2 day service as standard. This includes Channel Islands, Northern & Southern Ireland, Scottish Islands, Isle of Man and the Scilly Isles.
International delivery charges are automatically added to your order at the checkout. For any questions regarding international deliveries please contact us at email@example.com
All export inquiries should be directed to the export division before placement of order.
If no shipping option is available to your selected country please call us FREE on 0800 0224 060 to purchase your items.
All stated prices are subject to VAT at the current rate where applicable E&OA